Autosnap® KP818 Auto Key Programmer is a handheld device for programming keys in immobilizer units on vehicles. Autosnap® KP818 has a simple and robust design, to make your vehicle service experience much easier!

Autosnap KP818 Auto Key Programmer

Function

1. New keys programming
2. Reads keys from immobilizer's memory
3. New immobilizerprogramming
4. New ECUprogramming
5. New mechanical key number programming
6. Vehicle Identification Number programming
7. Reset ECM & reset immobilizer
8. Easy to operate by the guided menu programming
9. New remote controller programming
10. With full and strong database for the most important vehicle makes
11. Upgradeable via web-based download over standard USB cable

Vehicle Coverage

Please check our techinical service vehicle list.

Specification

Display: Backlit, Colorful, 320x240 pixel
Operating Temperature: 0 C to 60°C (32 to 140F°)
Power: 10 to 15 volts provided via vehicle battery

Package List:

1pc x Main Unit
1pc x User's Manual
1pc x Extension Cable
1pc x CD software
1pc x USB cable
1pc x OBDII Adapter
1pc x Optional Adapter Kits (Honda 3pin)
1pc x Carry case

X-100+ Auto Key Programmer is a handheld device for programming keys in immobilizer units on vehicles. This scan tool has a simple and robust design, to make your vehicle service experience much easier!

X-100+ Auto Key Programmer

The Dealer Code is 860010A1

X-100+ Auto Key Programmer is a handheld device for programming keys in immobilizer units on vehicles. This scan tool has a simple and robust design, to make your vehicle service experience much easier!

X-100 Features:

1.New keysprogramming
2.Reads keys from immobilizer's memory
3.New immobilizerprogramming
4.New ECUprogramming
5.New mechanical key number programming
6.Vehicle Identification Number programming
7.Reset ECM & reset immobilizer
8.Easy to operate by the guided menu programming
9.New remote controller programming
10.With full and strong database for the most important vehicle makes
11.Upgradeable via web-based download

X-100 Vehicle Coverage:

X-100 Packing List:

Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all EWS key information from 1995-2005.
Newest version:V3.19

BMW AK90 Key Programmer for all BMW EWS

Software Version: 3.19

BMW AK90 V3.19 Software Free Download

AK90 Description:

AK90 BMW KEY-PROG increased by 1995-2009 in all BMW EWS read the key information functions;improved some of the EWS to read and write speed. This product safe and effective, is the key to match the best tool for BMW.

AK90 Functions:

1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
2. With the help of software you can renew , lock or unlock keys as well.
3. Programming original chips "EML 10030A" for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.

Package List:

1pc x AK90 Host
1pc x AK90 10 Pin Cable
1pc x AK90-Chip data to read specific seat
1pc x AK90 V3.19 software CD-ROM
1pc x AK90 USB communication cable

AK500Pro is the most advanced Benz programmer in the world now. AK500Pro internal Benz original factory calculator, no need remove ESL ESM ECU, with EIS data directly calculate out original factory key data.AK500Pro is the only machine in the world that has KEY-LESS go writing function.

AK500 Pro Super Mercedes Benz Key Programmer Without Remove ESL ESM ECU

AK500 Pro Feature:

1. Faster and safer to write MCU.
2. Internal Benz original factory key generator.
3. Support NEC fast renew, Motorola MCU safe read and write.
4. Support infrared read and write NEC key and Motorola MCU key.
5. Support Benz read and write "Key-less go" Key.(Only this machine support)
6. Support through OBD port active Key-less function.
7. Key test function: more easier to test key and EIS(ESL).
8. Support ESL fast unlock, no need 32G database.
9. Support through OBD read and write SBC data, easier for change SBC control unit.

Product Parameters:
Online Communication Interface: USB2.
Power Specifications: AC Input 100-240V, 50/60HZ; output 12V/2A DC power consumption: 40W

Does AK500PRO Support Mercedes Benz W204 After 2008?
Answer: so far AK500PRO doesn't support NEC eeprom key programming, but support AK500pro NEC eeprom key calculation.
W204 is with NEC eeprom, therefore AK500pro neither supports W204 nor supports the following Mercedes Benz models: w204/w207/w221/w218 and W164 after 2008 year which EIS model CPU is NEC.

Important Notice on KEYLESS GO Function

If you want to use KEYLESS GO function: the key used to make key must be new and blank key, it can't be used key. New key must be as the same type and frequency as the original keyless go key. Otherwise it will cannot support keyless go function.
AK500 do ESL: read out original ESL data, generate new key data, write new data .binw back to ESL( now must use that 32GB hard disk database then can renew ESL)
When you deal W203 ECU, if your ECU is simens, it do not have eeprom. Resolution: Read flash of ecu, then make renew. Then use MB STAR to do doing.
AK500PRO can write keyless go key. But you must wirte via IR( Your keyless go key must be completely new or blank. If your key is old, it can read out date, then it can not be write again, you must renew it then can write).

Some Important AK500PRO Operation Display:

AK500 Function Menu:

Read ESL EEPROM:

Unlock ESL

Write ESL EEPROM

Syn ESL

Read EIS Data

Wiring Diagram

Read MCU ID

Key Calculator

Calculate Key

Mercedes Benz IR key Maker Calculating Key

New CN900 key copy machine, New Auto transponder chip key copy machine,Using 3.6-inch TFT LCD display, touch screen operation.CN900 key copy machine supports directly copy 4C and 4D chips, can copy such as Toyota 4d67,supports update online;two months later, it will be able to copy ID46 and Toyota G chip;CN chips can be copied many times.

CN900 Auto Key Programmer

CN900 USB Driver Free Download
CN900 Software Free Download

Advantage:
1) Can directly copy 4C and 4D chips, can copy such as Toyota 4d67.
2) Can update online.
3) CN chips can be copied many times.
4) Can recongize locked ID48 and can unlock ID48.

Main Features

Function 1:
1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota "G " chip key (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.

Function 2:
It can identify Toyota smart key, and read out the data.

Function 3:
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE " dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)

Function 4:
Connecting with Chinese PC software, it can save the read key code data unlimited.

Function 5:
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.

Function 6:
Without removing the ECU (Benz W140), it can start the chip.

Function 7:
It can unlock the 48 chips except the crypto lock 48 chips.

Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.

Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.

Function 10:
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74

Function 11:
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

CK-100 Auto Key Pro Tool is a new generation of the SBB Key Programmer, the replace version.Alternative to function and feature of the SBB V33.02.Increase much more features and functions.More powerfull and functional.Excellent Quality.
New Version: V45.02

Image Display:

R270 BMW CAS4 BDM Programmer includes all the features of CAS3 programmer. Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data, safe and effective.

R270 BMW CAS4 BDM Programmer

Software Version: 1.2

Description:

Directly read and write chip data quickly and safely, support the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data,safe and effective.
CAS4 includes all the features of CAS3 programmer. It has a powerful Motorola MCU programming function: removing-free programm Motorola MCU EEPROM (HC908) and FLASH (HC912, HC9S12, HC9S12X) series.

Function:

1.Support BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.)
2.Support BMW EWS4 (2L86D)
3.Support Benz EZS (1J35D/2J74Y/4J74Y/3K91D/1L85D/1L59W/3L40K/4L 40K, etc.)
4.Supports a variety of SRS modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.)
5.Support the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.)
6.Applicable to all kinds of EIS/CAS/SRS/ECU automotive modules.

Package List:

1x R270 main unit
1x 26pin cable
1x AC Adapter
1x USB Cable
1x Adapter
1x CD drive

Question:
I bought a R70 to program a M35080v6 eeprom, the tool show:
Read m35080v6.......... Send command to R270......wait.....
Send setting to device.................... For 30 minutes and it cannot read the mileage data.

Answer:
As the product description in our website, R270 supports the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.). Therefore, if you fail to use R270 to work with M35080 eeprom, firstly you have to remove M35080 chip and then plug it into the IC socket, this IC socket is designed for M35080 eeprom. Beside, you need to check if it is well-welded with the board? If not well-welded, it means poor communication,then it can’t clear and read the mileage data quickly.

Compare SMART ZED-BULL with ZED-BULL:SMART ZED-BULL has 30% faster advantage in reading and writing over than ZED-BULL which improves its success rate up to 99.99%, in this way Smart ZED-BULL will eliminate the waste of chips.It is a transponder cloning device which contains all of Zed-Qx's features and also has more additional features.

Smart Zed-Bull with Mini Type

No Token Needed!

Compare SMART ZED-BULL with ZED-BULL:SMART ZED-BULL gain 30% reading and writing speed.SMART ZED-BULL improve the success rate up to 99.99%, which will eliminate the waste of chip.(As we all know, some chip can be written only once)

Smart Zed-Bull Description:

1.New: support 8C and 8E chips distinguish function
2.Language: English, Turkish, Italian, Spanish and Portuguese
3.Zed-BULL will fulfill all of your requirements as professional on Immobilizer Systems;
4.Zed-BULL is a transponder cloning device which contains all of Zed-Qx's features and also has more additional features.

Smart Zed-Bull Main Feature of Zed-Bull:

1. Finding PIN Code, Preparing Precoded Transponders and Programming Transponders from EEPROM and MCU.
Zed-BULL PC software is excellent features will help you while using EEPROM applications. ECU pictures, which ECU has which MCU or EEPROM and the location of mcu or eeprom on the board, which type transponder will be used... These kind of information will ease your work. With Automatic Module Finding (AMF) feature, when you select the EEPROM file, the module will be recognized automatically
Another revolution of Zed-BULL is programming transponders when there is no key from ECUs. For now, Zed-BULL has 55 different applications and it is increasing... With this feature, you can program transponders, find pin codes and prepare precoded transponders for the cars which need precoded transponders like fiat doblo 48. For this feature, you don't need expensive precoded transponders priced about 8-10 Euro. You can use blank transponders.

2.Transponder Cloning:
11, 12, 13, 33, 73, 4C (writing to 4C electronic key and battery less TPX1 transponder), Philips Crypto 40 (some), 41(all), 42(all), 44(all unlocked VAG), 45(all)
Until now, common transponder cloning tools could only copy fixed transponders. But the revolution that we started with our device, Zed-Qx, is increasing with Zed-BULL. 41(NISSAN), 42(VAG), 44(Unlocked VAG) and 45(PEUGEOT) transponders which normally known as can not be copied, can be copied with Zed-BULL.

3. Producing Transponders for OBD Programming
If you have an OBD device like T-Code Pro, you will need special precoded transponders for some cars. Instead of buying these special transponders for high prices, you can produce them with Zed-BULL using blank transponders. And you don't need expensive precoded transponders priced about 8-10 Euro... The transponders that you can produce: 40, 41, 42, 44 Mitsubishi, 44 VAG, 45, 73 Mitsubishi, 61, 62, 65 and 46 for BMW, AUDI, PORSCHE, CHRYSLER, RENAULT... etc. For now, Zed-BULL has 24 different transponder production applications.

4. Hitag2 Transponder Programmer
If you want to buy a hitag2 programmer as standalone device, you have to pay around 1000-1500 Euro. But when you have Zed-BULL, you will get this hitag2 programmer feature for FREE. You can work on hitag2 transponders and improve yourself on your job.

5. Easy Use with Wide Graphic LCD Screen.
Wide screen of Zed-BULL will show you much more.... With Zed-Bull is wide screen, you can see more information like, VIN number and kilometer info for BMW cars, detailed information for 46 and 48 transponders ... etc.

6.Additional Function:
1) Reading kilometer, VIN number and key number information from original BMW key and writing to original BMW remote key
2) Finding PIN code from VIN number for HYUNDAI and KIA
3) PC software includes a wide-range transponder catalog, key fob procedures and more information
4) PIN code finding for 33 Renault and 45 Peugeot from transponder
5) Unlocking the 48(magic II) type locked transponder and make it re -usable
6) Saving transponder information into database including crypto transponders
7) 3 different device case color alternatives (red, black and white).

Smart Zed-Bull Package List:

1x Zed-bull main unit
1x PC USB cable
1x power Adapter
1x CD

VVDI for the vehicles VW Audi is a Windows-Based diagnostic software. It includes ImmoPlus, VAG Commander software, Tag Key Tool function. Powerful function tool for VAG vehicles. Now the latest version is V19.2, can update free and frequently, and also very easily.

Newest Update for Immoplus V19.2

VVDI Immoplus V18.0 Software Free Download
VVDI Immoplus V19.0 Software Free Download

How to Update VAG Vehicle Diagnostic Interface VVDI?

1. Please use this software: Commander Update V1.3 on your CD.
2. Give us the serial number
3. We send you update file by email.

VVDI Includes 3 Parts: ImmoPlus, VAG Commander software, Tag Key Tool function.
1. ImmoPlus supports prepare delaer key for VAG new cars. Such as VW 4th/5th immobilizer. Even the car lost all working key or with keyless.
2. VAG Commander Software can do diagonistics for VAG cars. Also change KM, read PIN, learning key etc.
3. Tag Key Tool is used for chipset read/write. Make key with eeprom dump file etc.

V19.2 Update

1.Fix bug for some MED17/EDC17 loadeeprom/flash get PIN,CS,MAC
2.Fix bug for some A6/Q7 OEM key and wirte A6 OEM immo info.
3.Add more car auto detect
4.bugfix

Support Car List:

VVDI Immoplus V15.0 Upgrade Instructions:

China VAG Vehicle Diagnostic Interface VVDI Function Added:

1. Support NEC 24C32, NEC 24C64 change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
2. Support GOLF5 MM7(9S12) change mileage through obd2, generate dealer's keys, read and write EEPROM and backup flash data.
3. Add TA special chip pre-program. Directly pre-program ID48 to TA2,TA3, TA4, TA5 chips.

Function:

1) Extracting security access codes (PIN) by OBDII
2) Programming keys by OBDII. Preparation of dealer's keys.
3) Mileage recalibration by OBDII
4) Clearing crash data DTCs by OBDII
5) Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6) Exchange speed limit of MMI-TV system

Standard Diagnostic Functions:

1) Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2) For all electronic control units reading identification data
3) For all electronic control units read error (DTCs)
4) For all electronic control units clear error (DTCs)
5) Scan all units
6) Broadcast requests
7) Measured values
8) Adaptation

Special Functions:

1 Instrument CAN
(1) With this function you can establish diagnostic session with the Instrument cluster using KWP2000 over TP2.0
(2) You can read current odometer value
(3) You can change odometer value
(4) Added support for VDO Instrument Cluster 2006+
(5) Read/Program memory of instrument cluster immobilizer
(6) Reading security access code of the IMMOBILIZER
(7) Read/Write immobilizer related data

2 EZS - Kessy (Q7/A6/Allroad)
(1) With this function you can prepare dealer key/learn dealer key
(2) Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)

3 Instrument K-Line
(1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
(2) You can Read/Change odometer value
(3) Read PIN code
(4) Read/Write eeprom
(5) Read ROM/Flash from the Instrument cluster

4 Engine Control Unit
(1) Read EDC17/MED17 flash memory
(2) Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flashmemory via OBDII (K and CAN). Calculation of checksums while programming, ME7.1.1, MED9.x, ME7.5)
(3) Read/Write flash counters (EDC16)
(4) Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
(5) Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
(6) Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
(7) Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
(8) Odometer correction (EDC15, EDC16)

5 Kessy adaptation
This function can be used for adaptation of brand new kessy units to the car. This adaptation can be by CAN TP2.0, K-KWP2000 and also can be used with Porsche Cayenne.

6 TV activation ED1/ED2
(1) Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF

7 Key learning
With this function you can learn key/transponder to the vehicle

8 Dump tool
With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit

9 Airbag
With this special function you can Read/Write EEPROM memory of the airbag module
Clear the crash data of the airbag module

10 Custom Read/Write
Using this application you can read/program memory in some electronic control unit

11 PIN Convertor

12 Service interval
Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options

13 Remote control adaptation
Using this application, you can learn remote controls

14 Navigation
Using this application, you can enable/disable the “Eject” button of the “Navigation” system

15 Cruise control system
Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available

VAG Vehicle Diagnostic Interface VVDI Display:

Throughout the entire operation the device must be connected to the PC in the "CONNECTED TO PC " mode.
Duration of the entire operation varies from some tens of seconds to some minutes, according to the key to be copied and the power of the computer used.

4D Cloning Tool

HOW TO Make a Copy of a Key with 4D Cloning Tool Program?

1. If you plug 4D CLONING TOOL device in USB port first time operation system offer to install the driver of located device.
2. Choose the manual installation method with point of driver directory (it is 2nd method).
3. Point the directory to folder "FTDI / driver " from CD. If you have done everything correctly, then the operation system will confirm that the new device already installed and ready to work.
4. Detect the number of USB port in which you plug in the 4D CLONING TOOL device.
5. Click by right button on "My computer " icon.
6. Choose "System property -> equipment->devices manager ".
7. Open "Ports (COM and LPT) ".The virtual COM port of device connection will located like "USB Serial Port ".The copy works for keys used on the vehicles indicated in the specifications attached to this document, or accessible through the INFO button in the 4D CLONING TOOL program.Start the "4D CLONING TOOL PROGRAM " from the Menu:Start Programs 4D Cloning TOOL Program of the "4D CLONING TOOL " type of device in your possession which it is connected, then click on that the program can detect the communication. If the version of the not up to date, a special message update.
8. Make sure the device is on, connected to the PC by the serial port, and the display shows "CONNECTED TO THE PC ".For the device to operate properly, do not place it close to the PC monitor, PC, power input point, or other electric equipment that generates magnetic fields.When the program has detected the device click on the "Start " button on the same video screen:Every time the "Start" button is pressed the settings selected will be saved on the disk.Follow the instructions on the PC video, complete with illustrations and short descriptions of the operations to be carried out at each step.

4D Cloning Tool Notes:

1) Throughout the entire operation the device must be connected to the PC in the "CONNECTED TO PC " mode.
2) Duration of the entire operation varies from some tens of seconds to some minutes, according to the key to be copied and the power of the computer used.

Host of remote controller (Remote master) for copy kinds of wireless RF remote controller! It's suitable for key&lock shop, locksmith, and car service shop!

H618 Host of Remote Controller(Remote Master) For Wireless RF Remote Controller

Latest version: QN-H618-1303.23600
Language: English
Update: Via Email or CD
Warranty: 1 year

QN-H618-1303.23600 updated information as following:
1. Add Cross V2 Model
2. Add Liberation J6 Model
Note: The above models only support remote controller vesion upon 1251 , The lower version or copied version cann't be supported.

Remote Controller Function:

1.Frequency indicate (25MHz-1GHz)
2.Data Detect
3.Duplicate /learn Fixed code remote
4.Duplicate /learn part of Rolling code remote
5.Duplicate /learn part of original car keys
6.Read/duplicate RFID
7.Compare data (Frequency, data, etc) between remotes after copy
8.Regenerate new remote control
9.Online upgrade via an USB
10.Chinese/English bilingual support

Remote Master Specification:

200x130x53mm (bare machine)
270 x 215 x 65mm (package)
Packing:color carton box
Input voltage: AC 100~240V
Output voltage:15V
Output current:1A
Operating Temperature: -20~ 85℃

Host Remote Master Feature:

1. Nice appearance design, Large 128*64 LCD display
2. Our host of remote controller (remote control machine) is design for easier operated and have more powerful function. It has nine buttons, among which 5 function buttons, 4 arrow buttons.


Package list:

1pc x host of remote control
1pc x power adapter
1pc x Remote connecting wire 1
1pc x USB update wire
1pc x operate instructions
1pc x Certification

Zed-BULL is a transponder cloning device which contains all of Zed-Qx's features and also has more additional features. Zed-BULL will fulfill all your requirements on Immobilizer Systems.
Software version:V508
Hardware version:V5.02
Language: English, Turkish, Italian, Spanish, Portuguese

ZED-Bull Transponder Clone Key Programmer Tool

Highlights:
Software Version: V508
Hardware Version: V5.02
No Tokens, No Login Card Needed!
Supported Languages: English, Turkish, Italian, Spanish, Portuguese

Description:

1. New: support 8C and 8E chips distinguish function
2. Language: English, Turkish, Italian, Spanish and Portuguese
3. Zed-BULL will fulfill all of your requirements as professional on Immobilizer Systems;
4. Zed-BULL is a transponder cloning device which contains all of Zed-Qx's features and also has more additional features.

AK300+ BMW CAS Key Maker (Support in 2002 -2009 years) especially for BMW CAS system key programmer.Support new BMW CAS,CAS2,CAS3,CAS3+. Automatic analysis CAS data,easy to match keys.

BMW CAS AK300+ Key Maker

Firmware Version: 1.16
Software Version: 1.50


AK300+ Features:

1 BMW CAS supports a diagnosis of communication directly through the OBD port or through the CAN BUS port security to read and write data EEPROM;
2 automatic analysis CAS data, automatically displays the BMW keys to use quantity; key tooth number; remote control frequency; CAS with the DME synchronization ID; keys scrapped the state, etc.;
3 supports key scrapped or restart using the old key; this technology unmatched global technology;
4 supporting the rehabilitation of CAS computer (due to transfer table is damaged or programming lock);
5 supports the new 2002-2009 BMW CAS; CAS2; CAS3; CAS3+
6 support the horse CAS; CAS 2; CAS 3; CAS 3 + BMW and BMW remote key.
7.support E65/E66/E87/E60/E61/E90/E91/E92/E93/E71/E71

Package List:

1.AK300+ Host (1 PCS)
2 AK300+ USB communication lines (1 PCS)
3.AK300+ Switching Power Supply (1 PCS)
4.AK300+ OBD-11 communication lines (1 PCS)
5.AK300+ CAS computer wiring board (2 PCS)
6.AK300+ DVD Software (1 PCS)

FAQ:

Q:How to use AK300+?
A:CAS1 for 2001-2005 E65/E66
CAS2 for 2004-2006 X5/E60/E90
CAS3 for 2007 E60/E90/X5/X6
CAS3+ for 2008-2009

Easy and convenient generator of microprocessor software dumps
Support of keys based on the NEC controller. Such as 0x28, 0x35, 0x40, 0x51, 0x57, 0x61, 0x71, 0x81, 0x229.
Ability to check status and proper operation of Electronic Steering Lock (ESL)
Ability to program ESL right on a car (No need to replace it)

New BENZ IR NEC Key Programmer

Benz Ir NEC Description:

Easy and convenient generator of microprocessor software dumps
1.Support of keys based on the NEC controller. Such as 0x28, 0x35, 0x40, 0x51, 0x57, 0x61, 0x71, 0x81, 0x229.
2.Ability to check status and proper operation of Electronic Steering Lock (ESL)
3.Ability to program ESL right on a car (No need to replace it)

Supported vehicles:

1.W202 (MC68HC05X32 x 2 controller)
2.W203 (MC68HC908AZ60 controller)
3.W208 (MC68HC05X32 x 2 controller)
4.W209 (MC9S12DG128 controller)
5.W210 (MC68HC05X32 x 2 controller)
6.W211 (MC68HC912DG128A controller)
7.W215 (MC68HC908AZ60 controller)
8.W220 (MC68HC908AZ60, MC68HC05X32 x 2 controller)
9.W230 (MC68HC908AZ60, MC68HC05X32 x 2 controller)
10.W639 Vito (MC68HC908AZ60 controller)

Package list:

1pc x NEC controller programming tool
1pc x Adapter to work with NEC controllers (for soldering)
1pc x USB-cable

ND900 Auto Key Programmer with 4D Decoder, has been designed and built to keep pace with the evolution of transponder car keys. The ND900 Pro key duplicator features the most innovative electronic components in the field of radio frequencies thus allowing easy detection,reading and cloning (duplication) of fixed code transponders and the identification of cryptographic transponder codes.

ND900 Auto Key Programmer

Note:
1. ND900 Update Website:
(You need to update to the latest software first, then you can use it together with 4D Decoder.)
2. ND900 4D Decoder:
Connect directly with ND900 multiplexer, then you can copy 4D chip, no need to connect with the laptop.

Description:

The ND900 Pro has been developed to cater for future developments and to keep up to date with the ever expanding technology of transponders within the Automotive vehicle systems.
The ND900 Pro offers complete flexibility as once the main unit is purchased the functionality can be expanded by adding additional software.
The machine of the future for transponder developments, is the ND900 Pro....for professional locksmiths.
ND900 can directly copy all of 4D4C.(4C.4D=ID60.61 62 63.65.66.67.68.69), use FREE CHIP. The chip can be copied repeatedly, typeYS-01, only chip.

ND900 Detail:

The professional duplicating machine, Transpronics, has been designed and developed to assist immobilizer system specialists. Transpronics is not only a duplicating machine; it is also a unique machine that can make transponders from eeproms in immobilizer boxes when a customer has lost all keys. It can also inform you if a transponder is locked or not. It has been developed over 4 years. It can copy most crypto transponders like 42, 45,4D, most of 44 VAG and some 40 and 41 transponders. It can copy Texas fixed transponders to TPX1 without battery transponders.

AD90P+ key duplicator features the most innovative electronic components in the field of radio frequencies thus allowing easy detection, reading and cloning (duplication) of fixed code transponders and the identification of cryptographic transponder codes.
Newest version: V3.27

AD90 AD90P+Transponder Key Duplicator Plus

Software Version: V3.27

AD90 Transponder Key Description:
1.The professional duplicating machine, AD90, has been designed and built to keep pace with the constant evolution of transponder car keys.
2.The AD90 key duplicator features the most innovative electronic components in the field of radio frequencies thus allowing easy detection, reading and cloning (duplication) of fixed code transponders and the identification of cryptographic transponder codes.
3.The AD90 in addition has major features such as copying of Crypto 42 type transponders and the Texas 4C and 4D transponders. These are additional options but make the AD90 a powerful tool.
4.The AD90 has been developed to allow for future developments and to keep up to date with the ever expanding technology of transponders within the Automotive vehicle systems.
5.As well as Transponder systems, the AD90 will also be developed to offer new and exciting facilities which will further advance its capabilities.
6.The machine of the future for transponder developments, is the AD90....

Specification:

1.Features:
Identify transponder
Copy transponder
Software update from Internet
Usable with PC software
Available to be used with the Chip Decoder System
AD90 can detect,read and duplicate Philips,Megamos,Temic and Texas transponders

2.Reads Fixed Code Fransponders:
Philips PCF7930/31 C Silca 33,73
Philips PCF79 35 40,41,42,44,45
Temic C Silca 11, 12
Megamos C Silca 13
Silca T5
Texas C Silca 4C

3.Recognises:
Megamos crypto C Silca 48,
Philips crypto C Silca 46
Texas crypto 4D (60 universal, 61 Mitsubishi, 62 Mitsubishi, 63 Ford, 64 Renault before year 2000, Chrysler, Jeep, 65 SUZUKI, 66 SUZUKI, 67 TOYOTA/LEXUS, 68 TOYOTA/LEXUS2, XX new or universal) NEW!!
Fixed 11,12,13,33,73,4C,T5
Crypto 40,41,42,44,45,4D,48
Rolling + Crypto 46

4.Copies:
11,12 Temic
13 Megamos
33
42
4C Texas
T5 20 Nova

AD90 Transponder Key Software Display:

Packing List:

1pc * AD90 key Duplicator
1pc * 42 duplicate module
2pcs * Power adapter

BMW Multi Tool includes forth parts, hardware device, dongle, programmer, software. Before running software you must connect dongle and hardware device to computer.
Newest Version:V5.9

Latest BMW Multi Tool

Powerful Than AK300!!!
Software Version: V5.9
BMW Multi Tool V5.9 Software Free Download
Warning: Make sure connect dongle to compute before run the software.

BMW Multi Tool V5.9 Update Tips:

1.Fix bug make dealer key for EWS4
2.Normal bugfix

BMW Multi Tool V5.9 Description:

1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link connector (DLC).
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB Cable.
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.

BMW Multi Tool V5.9 Specifications:

1. Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W

BMW Multi Tool Supported Immobilizer Type and Function

BMW Multi Tool V5.9 Supported Function Including:

1. Car access sytem dentification
2. Read/Write CAS EEPROM(OBDII)
3. Read/Write KM stored in CAS system(OBDII)
4. Read/Write synchronization codes stored in CAS system(OBDII)
5. Synchronize DME and CAS(OBDII)
6. Synchronize CAS and ELV(OBDII)
7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3 verison)(OBDII)
8. Read/Restore CAS KEY information(OBDII)
9. Disable/Enable key with working key(OBDII)
10. Clear DTC and Shadow (OBDII)
11. Prepare dealer key with CAS eeprom dump
12. Unlock dealer key prepared with our software with CAS eeprom dump or KEY information
13. Change KM in CAS and instrument dashboard with file dump
14. Have key programmer, you can programm dealer key directly.

Pay Attention to the Function: Help->Device update.
You can get the latest software version and firmware verion when you can access to internet.

1. Menu:
- Tool: you can choose language here, support "English" and "Chinese Simplified" Restart software to apply your settings.
- File Make Key: you can prepare dealer key with EWS and CAS EEPROM dump.
- Help: Device update. You can get your device and dongle id version and update it.

2. Protocal Type:
Now BMT support there type of protocol: KWP-CAN BUS 100Kbps, KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you to choose the right protocol. After choose protocol okay, then press "Connect". If connected success. All CAS info will display in CAS Identification. Include CAS number, VIN, production date, etc.

3. EEPROM Function:
Read EEPROM, Write EEPROM, Save File, Load File...
1). You should backup the CAS EEPROM before prepare dealer key. After succeed read EEPROM, please save it as back file. This step is very important.
2). Now can't read the whole EEPROM for cas3 system. But the main section is contained. It should be saved. When you read CAS EEPROM, it will give tips (Press ok to continue).

4. Odometer:
Support read and change KM stored in CAS system.
Don't support to change KM in instrument. If you want to change the KM display in instrument. You should change KM in CAS system first. Then modify the KM in instrument manually.

5. Synchronization Codes:
1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code stored in CAS3 system.
2). Synchronize DME and CAS— this function will be useful while prepare dealer key or any other operation which cause can't start the engine.
3). Synchronize CAS and ELV — this function can help clear wheel errors

6. Key Learn
1). Get Key Info: With this function you can get the key cutting, remote frequency, and key data.
2). Save Key Info: Save the read key info.
3). Load Key Info: Load the saved key info. To see the key data and prepare for write key info.
4). Write Key Info: Write the loaded key info into CAS system.
5). Make Dealer Key: You can prepare dealer key after you get key info successfully. Also you should choose the key position.
6). Add key: Add the new dealer key into CAS system. Some CAS system needs this step to start the engine.
7). Enable Key: Insert the current key into ignition switch, press "Enable Key". The key after current key will be enabled.
8). Disable Key: Insert the current key into ignition switch, press "Disable key". The key after current key will be disabled.
9). Clear DTC: Before prepare dealer key and after it you can use this function to clear DTC.
10). Clear Shadow: Before prepare dealer key and after it you can use this function to clear Shadow.

7. File Make Key
1). Choose CAS or EWS type.
2). Load the choose EEPROM file you will get the make dealer key window.
3). Choose key position and press "Make Dealer Key" button. Flow the given tips to prepare dealer key. After succeed you can save the new EEPROM dump file.
- For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared dealer key can start the engine directly.
- For some CA3+ type you need to write back the new dump file into car.
4). CAS3 encrypt data, only OBDII prepare make key is support for CAS3 encrypt data.

FAQ:

Q:Could you please let me know if it has EWS function ?
A:Yes,it can do EWS,you need to detach the device then connect with CAS socket to read EWS data.

KP819 KP-819 Auto Key Programmer (Mazda, Ford, Chrysler, Landrover, Jaguar no need password)

KP819 KP-819 Auto Key Programmer (Mazda, Ford, Chrysler, Landrover, Jaguar)

No Password Needed!

KP819 Key Programmer Car Model List:

BMW HIT+2.01 CAS1 PRO combines the function of Hitag-2 programmer and BMW scanner 2.01 in one unit,BMW HIT+2.01 CAS1 PRO can be used to program key for BMW CAS1 and to diagnose BMW cars models.

BMW HIT+2.01 CAS1 PRO

Note: Diagnose the car before the year 2006, if you want to copy keys, it only can read data for BMW CAS1 system, can not do other BMW system.

How to Program Key by Hitag2 Programmer:
Hitag2 programmer is a universal key programmer, with additional option of key programming from dump. Just insert blank key or appropriate transponder you need to program, Hitag will be able to detect the transponder type and operate all steps automatically.

Key Generation from Dump is Available for The Following Cars:
Support BMW (2002 -2009 years) CAS/CAS2/CAS3 DG512 / CAS3 + DP512
Support matching BMW (2002 -2009 years) CAS/CAS2/CAS3 DG256 / CAS3 + DP512 key and remote control; the world's unique tec

Feature of Hitag-2 Programmer:
ALL types of Hitag2 transponders are fully supported!
Widest range of supported cars, using Hitag2 protocol!
Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car, without damage to its functionality!
Correct BMW key programming - RADIO REMOTE is working!

Supported Transponder Types:
PCF 7936
PCF 7941
PCF 7942/44
PCF 7943
PCF 7945
PCF 7946
PCF 7947
PCF 7952

Supported Transponder Modes:
Password mode
Crypto mode

Supported Protocols:
Manchester
Biphase

BMW Scanner 2.0.1 Workable BMW Cars Models:
It is intended to work with BMW 1, 3, 5, 6 and 7 series in "new" chassis.For chassis E60/E61(5') E63/E64(6') E65/E66(7') E87(1') E90/E91(3')

BMW Scanner 2.0.1 Function:
Connecting with all electronic control modules in the vehicle.
For all electronic control units reading identification data, sw/hw versions, user information fields.
For all electronic control units read and clear error (DTCs) memories - standart, shadow, history memory.
Possibility to read/program memory of electronic control units (including CAS modules).
Synchronization DME/DDE and CAS.

Note
It can only do the year before 2006.
If you want to do key program, it can only be available on CAS1

Package List

1pc x BMW HIT-2.0.1 CAS1 PRO
1pc x USB Cable
1pc x CD Driver

Car key master ckm200 works with BMW, BENZ and more vehicles. CKM200 supports run with PC and also supports work alone.ckm200 multi-functions including: key information reading, data calculating, key writing, and is applicable to both old and new.

Car Key Master Handset with Unlimited Tokens

CMK 200 Features

BMW & BENZ and more vehicles are coming out soon.
Both PC and handset models for your choice.
Multi-functions ----Integrate functions such as key information reading, data calculating, key writing, and is applicable to both old and new.
Easy operation ----Graphical workflow will make it easy for your operation.
Whats more, our Car Key Master can be operated via OBD socket, CAN or K line on many models without disassembly.
High security G3 platform ----Besides USB communication and online update, our G3 (the third generation) platform is especially featured by its high security: hardware anti-cracking and software anti-copying, adopting IDEA (International Data Encryption Algorithm) for registration, upgrade and payment.
Bran-new keys ----We will cooperate with German technology, and launch the bran-new keys for all the BMW and Mercedes Benz. At that time, you can get rid of the key shortage and no need to use any renovated second-hand keys.

CKM 200 Supported Car Models

Benz Series:

Benz S CLASS (W140.W220)
Benz CL CLASS (W215)
Benz SL CLASS (R230)
Benz E CLASS(W210.W211)
Benz CLK CLASS(W208.W209)
Benz CLS CLASS (W219)
Benz C CLASS (W202.W203)
Benz ML CLASS (W163)

BMW Series:

Old Style BMW (EWS2.EWS3.EWS4)
BMW 1/3/5/6 (E87.E90.E91.E92.E60.E61.E63.E64)

Series White CAS2
BMW 1/3/5/6/X
(E87.E90.E91.E92.E60.E61.E63.E64.E70)Series

Black CAS2
BMW 1/3/5/6/X
(E87.E90.E91.E92.E60.E61.E63.E64.E70.E71)Series
black CAS3
BMW 7series E65.E66 CAS

CKM 200 FAQ:

Q: What year for bmw cars can CKM200 do? It can do new cars?
A: CKM200 can do BMW Cars before 2009, can not support new BMW car.

Renault Megane & Scenic (1999-2003) 8 digits PIN code reading via OBDII
Renault Megane - 1999 to 2003
Renault Megane Scenic - 1999 to 2003
Notes: Renault Explorer for the car after 2003 with canbus.So this cable is not same as Renault Explorer.

Renault PIN Code Reading Key Programming

Renault PIN Code Reading Key programming is not the same as Renault Explorer.
What is difference between Renault PIN Code reading Key programming and Renault Explorer?
Renault PIN Code reading Key programmer works for Renault cars from 1999-2003 which is K Line. Renault Explorer works for Renault car after 2003 which is CAN line.

What Renault PIN Code reading programmer can do?
It can read immobilizer PIN code and Key programming on Renault Megane and Megane Scenic modules with UCBIC (BSI) module from 1999 to 2003 year via OBD II.

UCBIC (BSI) Module Like This:

PIN Code Reading and Key Programming Procedure:
Start PINReader.exe VER 3.12 Select from Model Selector "Renault UCBIC" - "Megane I (8 digit PIN)" or "Scenic (8 digit PIN)". Click "Program Key's" for PIN reading and Key programming...

After Read PIN code started "Renault Megane/Scenic Key programming procedure".
After this message insert first Key to program. Switch On Ignition

After "Switch OFF Ignition" first Key is programmed.

Programming procedure for the next key is analogous...

Manual entering PIN code

Read Live Data from UCBIC Module

Read and change Setup IMMO parameters

Package List:

1pc x Renault Pin Code Reading Cable
1pc x CD Driver

SuperOBD SKP-900 Key Programmer is Hand-held OBD2 key programmer. SKP-900 Key Programmer can support almost all cars in the world, such as Ford, Land Rover, Chrysler, Jeep, Toyota, Nissan, Honda, Mitsubishi, Hyundai, Kia, and so on...

SKP-900 Screen Display:

SKP900 Products and Software Display: