obd-scanner.com : RSS All Products Feed

MT-08 Multifunction Circuit Test Wiring Accessories Kit Cables Works With MST-9000+

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 15 Jan 2014 04:22:45 +0800

MT-08 Multifunction Circuit Test Wiring Accessories Kit Cables Works With MST-9000+

Feature:

Wiring Assistance Kit: A perfect wiring circuit checking tool Can be used quickly for adjustment and assists technician in checking the car problems accurately.

Its variable Resistors can be used to simulate coolant temperature sensor signals, throttle valve sensor signals to vehicle ECU to avoid unnecessary new parts replacement.

Complete set of various wires in the case that are suitable for most European, American and Japanese made terminals.

Equipped with 2 sets of LED lights; it can be used to monitor Hall Effect, photoelectric signals, nozzles, electromagnetic valve of transmission shift gears and control signals.

SRS connector provided can simulate airbag and routed contracting device of safety belt to avoid accident or miss-judgment.

Function:

1. When checking the parts, it could connect the back of terminal directly, would not to damage the circuit, reduce the circuit rust and avoid to adding impedance.

2. Apply to any Automotive Multimeter, the extended line of probe for oscilloscope. More convenient connection and checking rapidly.

3. When checking the electric current, only use the lines to connect the circuit, do not need to cut the electric wires.

4. Variable Resister can simulate the pretend signal of coolant temperature sensor, throttle valve sensor and send the pretend signal to computer. It would avoid risk to change the new parts again.

5. Equip 2 sets LED light. It can supervise hall effect, photoelectric signal, nozzle, electromagnetic valve, electromagnetic valve of transmission shift gear....and control signals.

6. SRS Connector can simulate airbag and routed contracting device of safety belt to avoid accident or miss-judgment.

7. Various wires in this box, it is suitable for the Europe, America and Japan terminal. High common use and convenience

Package including:

1. 5KΩPotentiometer (Variable Resister) 2pcs

2. LEDStroboscope 2pcs

3. Various automotive flat terminals 48pcs

4. Acicular Probe 4pcs

5. Various automotive circular terminals 24pcs

6. Probe 2pcs

7. 1 to 2 connector 2pcs

8. Alligator clip 2pcs

9. 1 to 1 connector 4pcs

10. SRS connector 2pcs

15000mAh Jump Start Emergency Charger for Mobile/Laptop/Car with Over-Load Protector

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 15 Jan 2014 02:45:33 +0800

Jump Start Emergency Charger:

1. Big capacity: It has 15000mAh

2. Main unit has LCD screen show you battery status.

3. With over-load protector, no need to worry about short circuit, very safe for use.

Function:

Charging for the common mobile phone(5v), notebook(19v), electronic product. It could be used as a lighting and warning lamp(SOS) as automobile starter emergency start power.

1: Car emergency start charging

2: Mobile phone charge

3: Notebook charging

4: Lighting and warning(SOS) lamp

It also have many adapters in the package to fit different laptop. For charge the MST-SOS0 you can use car charger or use the power adapter we supplied in the package. MST-SOS0 with Over-load Protector, will not have short-circuit problem. Even if after you left it in your car after using, it will not have any dangerous.

Q: What is the function of the product?

A: It supports charging and supplying power for phone, notebook, PSP,MP3/MP4 and other electric products, provides various modes of lighting function, and enables to start automobile in emergency.

Q: How to charge/supply power for electric products?

A: Three kinds of voltage, 19V, 12V and 5V respectively, are outputted from the jump starter’s lateral side. Check the voltage of electricproduct’s charger or adapter first, and select corresponding output port; plug cable to the jump starter and plug the other side to electricproduct’s port. After the connection, press the switch and it begins to charge/supply power for electric products.

Q: How to open the torch?

A: Press switch for 5 seconds to start torch. Then press switch buttonlightly to change different modes of lighting functions - successively lighting, flashing, SOS signal light and finally turn off.

Q: How to switch off Jump Starter?

A: It has smart detection function that once there is no load or the electronic product is full charged, Jump Starter will go into sleep mode to reserve power.

Q: How to charge for jump starter?

A: Plug the jump starter’s adapter/charger pin to input port and the other side connects to 220V power supply or 12V vehicle power supply,and then it begins to charge. If power indicator lights flash circularly, it means it works well. Five power indicator lights light completely showing it charges well.

Q: How long for charging jump starter?

A: about 2 to 3 hours

Q: How many times can it charge a phone?

A: Take iphone4 for example, it can charge iphone4 for successively 7 times from power off to full charge; as to ordinary phones, it can charge at least 10 times.

Q: How long does it take to charge a phone?

A: Because it applies imported chip from USA, its output electriccurrent can reach up to 3A, and it takes about 1 hour to finish charge,quicker than the original charger.

Q: How to start vehicle?

A: Vehicle storage battery fails to start vehicles for various reasons and Jump Starter exerts its functions. First of all, check power supply to ensure there are two power indicator lights on, which power quantity is enough for starting vehicles. Connect the storage battery clips’positive and negative poles to that of vehicles storage battery, red clip to red one, black to black. After clamping, plug storage battery clip pin to jump starter, switch ignition on and start vehicles. If failed, try again after seconds and turn on the key until start vehicle successfully. After that, remove storage battery clip pin from jump starter rapidly and then remove clips from vehicle storage battery.

Q: How to test the capacity of the emergency charger?

A: Press the button softly and the power indicator light(s) will illuminate. If 5 lights are on, it means the device is 100% charged; if 4 lights on, it means the device is 80% charged; if 3 lights on, it means the device is 60% charged; if 2 lights on, it means the device is 40% charged; if 1 light on, it means the device is 20% charged. If all the 5 lights flash, it means battery is low and the device needs to be charged as soon as possible.

Q: What situations will the car battery has insufficient voltage?

A: 1. Nowadays, all the cars on Chinese market are using lead-acid battery. Most of these batteries have an average lifespan of 1 to 2 years; some even cannot sustain for a year.

2. If the car has not been driven for a long time, the car battery will lose its charge.

3. If the driver forgot to turn car lights off, the car will not be able to start up the next day.

4. If the cars computer and anti-theft system are left open, the battery will run out even if the car is not being driven.

5. If the temperature is low, more energy will be needed to support the car, and the battery will run out easily.

6. If the car is in a noisy environment, for example, in a thunder night or on a firecracker event, and keeps on alarming, the battery will run out easily.

Q: How can the exquisite emergency charger start up a vehicle?

A: Jump Starter is the first emergency charger that works for automobiles. It is small, light and easy to carry. By using high power polymer battery and electronic component imported from U.S., the device is a critical safety insurance that guarantees your car is on charge all the time. No matter where you go, you will be free from low battery issues.

Q: When should I charge my electronics with Jump Start Emergency Charger?

A: Generally speaking, your cell phone should be charged most often.Bring a 220v charger, an adapter and the device while you are on a business trip, and you will be able to charge your electronics anytime anywhere.

Q: What would happen if the storage battery is connected in a wrong way?

A: Considering that some people may make the careless mistake, the storage battery is protected with a guard circuit. When there is a short circuit, the fuse will blow out immediately, keeping the device and the user from danger. You can take the emergency charger to the store that sold you the device for repairs.

Q: Should I remove my laptop battery while it is powered up?

A: No! But you can increase its lifespan if it is powered by E-POWER when the battery is removed.

Q: How to start a car battery?

A: Car start up is supported by the maxim electricity provided by car battery. After decades of technological development, car battery, also known as lead-acid battery, now are all maintenance-free – users do not need to add water or dilute sulphuric acid to it. All the battery, even if it has not been used, will lose charge automatically, which means as time goes on, the battery storage will decrease and come to an end finally, no matter it is being used or not. Once a battery over discharges, its performance plunges. For this reason, car owners are advised to charge their battery every now and then.There will be polarization when a lithium battery is discharging. The more electricity it discharges, the bigger the polarization will be. For electricity current of the same amount, when the temperature rises, the polarization will get less. But when the temperature falls, it will be difficult to start the battery even when there is charge inside it. This is because when the battery discharges, the heating in the battery leads to higher temperature, providing the battery a nice environment to max the power output. One thing you should pay attention to is, do not try to start the battery immediately if you fail the first time because the battery voltage cannot rise up very soon. If you keep starting it, it can be damaged. It is suggested that the battery should be started every 10 seconds.In addition, if the car battery has not been changed for more than 2 years, you should take it to a 4S store for a check in case the car cannot start up one day. Or you can just get a Jump Start emergency charger in your car, to protect it, as well as other electronics, from low battery problems.

XTruck USB Link + Software Diesel Truck Diagnose Interface and Software with All Installers

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 14 Jan 2014 09:45:45 +0800

XTruck USB Link + Software Diesel Truck Interface and Software is a PC-to-vehicle interface compatible with multiple software applications, minimizing your investment in multiple brand-specific diagnostic.

XTruck USB Link + Software Diesel Truck Interface and Software with All Installers

Attention:
1. It Can Not Be Updated, Otherwise, The Multiplexer Will Be Damaged.
2. It Works As Great As Nexiq.

XTruck Feature:
Compatible with applications that diagnose engines, transmissions, ABS, instrument panels and more.
Reduce reprogramming times with direct USB connection.
Mixed fleet capabilities with broad protocol support.
Quick access to vehicle data for maintenance or management reports.
Quickly attaches to vehicle's diagnostic connector.
Easy portability increases flexibility, May be used with desktop PC or laptop.

XTruck USB Link Packed Software and Application
- Allison (Included!)
- Bendix 6.3.8.0 (Included!)
- Detroit Diesel DDDL 7.05 ((Included!)
- Detroit Diesel DDCT (Included!)
- Detroit Diesel Calibration Tool (Included!)
- Eaton Service Ranger 3.2 (Included!)
- International DLB (Included!)
- International ICAP, IPTS, NETS, IPC (Included!)
- International Master Diagnostic (Incluided!)
- Meritor and Wabco Diagnostics (Included!)
- Cummins Insite 7.5 (Included!)
- Hino 2.0.3. (Included!)
- Caterpillar 2.0.1.0 (Included!)
- Perkins EST 2010B (Included!)
- V Macks 2.6.12 (Included!)
- V Macks Dealer Pro (Included!)
- Volvo VCADS 2.35.10 (Included!)
- Toyota Techstream for car (Included!)

XTruck USB Link API Support
RP1210A, RP1210B
J2534-2
USB vehicle-to-PC connectivity, XTruck USB linke supports Windows xp and windows 7 32-bit and 64-bit and windows CE compliant
Not all applications are included. If compatibility confirmation is required, more information is needed, or there are questions about an unlisted application, please contact us, a specialist will help you make the right choice.

XTruck Protocol Coverage
CAN - J1939/CAN125/CAN250/CAN500/CAN1000
2nd CAN - J1939/CAN125/CAN250/CAN500/CAN1000
J1587/J1708 J1850 J2534
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141) ALDL ATEC 160 (160 baud)

XTruck Support Heavy-Duty, Light-and Medium-Duty Trucks, CONSTRUCTION EQUIPMENT like (Wheel loader, Articulated Hauler and Excavator), Genset.

FREE Heavy-Duty Truck Diagnostic Applications

1 VOLVO TRUCK: FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6, FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12,VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY

2 VOLVO BUS: B12B,B12M,B12R,B6R,B7L,B7R,B9L,B9R,B9S,B9TL,PREVH,PREVX,

3 MACK TRUCKS: V-MAC I, V-MAC II, V-MAC III, V-MAC IV, Service Diagnostic

4 VOLVO CONSTRUCTION EQUIPMENT (CE):
Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F
Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D,
Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B,EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B,EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611
Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960 , G970, G976, G990

5 Navistar: ALL Diamond Logic Builder (DLB) ServiceMaxx

6 International: ALL Intune, MD32,

7 Freightliner: ALL ServiceLink:cascadia,century,columbia,Coronado,classic,FLDSD,4900FA, 4900SA,4900EX.

8 HINO: ENGINE:300SERIES, 500 SERIES, CR03_J08E, CR03_J05D, COMMONRAIL(J05E), J05D_US, J08E_US,P11C,VCS, Hibrid, Inverter, Brake(ABS), AT_45043LE

9 ISUZU_GMC: 1996-1999 NPR Diesel and F Series Include NPR/W 3500, NPR HD/W 4500, This is for 6.0L V-8 Gasoline Engines only, 7.8L 6HK1 Engine
Isuzu: NPR, NPR HD, NQR, NRR, FTR, FVR, FXR with 6HK1 LG4 Engine, NPR, NPR HD,NQR, NRR with 5.2L (4HK1) or 3.0L (4JJ1) Diesel engine. 6.0L V-8 Gasoline Engine
GM: W3500, W4500, W5500, WT5500, W5500 HD,with 5.2L Diesel Engine Only,T6500,T7500, T8500

10 SCANIA VEHICLE, KOMATSU excavator, and MAN vehicle will be updated.

XTruck USB-Link works with all popular Engines including: Detroit Diesel, Caterpillar, Cummins, Perkins Engines.

1 Detroit Diesel Diagnostic Link(tm) (DDDL)
All DDEC VI equipped engines ,DD13,DD15,DD16,SERIES60,MBE4000,MBE900,and RS9, RSX9-A,RSX9-B, RSX9-R,RS10, RSX10 J1939 engine brake level for Series 2000 and 4000 Engines with USA and ISO firing order selection.

2 Caterpillar (On High Way Engine for J1939)
3126, 3406, 3306B, 3512C, C4.4, C6.6 C7 C9 C11, C13

3 Cummins INSITE
4d95-cm2150c/D
6d125/6d140/6d170
B5.9g
C Gas plus/B Gas plus
C8.3g/L10G
Gas compression GTA3.9/5.9/8.3GC,
KTA19/38GC-CM556
ISB-CM2150D
ISB-CM2250
ISB-CM850
ISB Daimler Chrysler
ISB4.5/6.7 CM2150
ISB5.9G-CM2180
ISBe-CM850
ISBe-CM2150E
ISC-CM2150D
ISC-CM2250
ISC-Transit Bus ISL8.3-CM850
ISDe-CM2150C
ISF2.8-CM2220E
ISF2.8-CM2220S
ISF3.8-CM2220
ISF3.8-CM2220S
ISL-CM2150D
ISL-CM2250
ISL G-CM2180A
ISL8.9-CM850
ISLe4.5-CM2150E
ISM-CM870
ISM-CM875
ISM-CM876
ISM11 CM876
ISX-CM871
ISX11.9/15/16-CM2250
ISX/ISZ13-CM2150
L Gas Plus
PIM
QSB 6.7-CM2250
QSB 3.3-CM2150D
QSB4.5/5.9/6.7-CM850
QSB5/7-CM850
QSC8.3-CM2250
QSC8.3/QSL9
QSK19-CM850/CM2150
QSK19/23/45/60/78
QSK19G/45G/60G,QSV81/91
QSK23-CM500
QSK38-CM850/CM2150
QSK50/60-CM850/CM2150
QSL 9-CM2250
QSL9-CM850
QSM11-CM876
QST30-CM552
QST30-CM850
QSX15
Signature/ISX-CM870

4 Perkins Engines
1000 (6 Cyl) / 6.354 Series
RA - 6.247 Series
RA - 6.247
T - 6.354 Series
SOS - 6.354 Standard Option Schemes
TC - 6.354
TD - H6.354
TE - T6.354
TF - HT6.354
TG - 6.354.1
TH - T6.354.1
TJ - 6.354.2
TK - C6.354.2
TP - T6.354.3
TR - 6.372
TT - TC6.354.1
TU - T6.354.4
TV - 6.372.4
TW - 6.354.4
TX - C6.354.4
TY - H6.354.4
TZ - HT6.354.4
Y - Phaser / 1006 Series
YA - 6.60
YB - T6.60
YC - C6.60
YD - CC6.60
YE - T6.60CC
YG - 6.601
YH - T6.601
YJ - CCA6.601
YK - CCW6.601
YS - Option Packs M225TI / M215C
1100 Series
D - 1100 Series 3 Cylinder
DC - 1103C-33
DD - 1103C-33T
DF - 1103B-33
DG - 1103B-33T
DJ - 1103A-33
DK -1103A-33T
R - 1100 Series 4 Cylinder
RE - 1104C-44
RF - 1104C-E44
RG - 1104C-44T
RH - 1104C-E44T
RJ - 1104C-44TA
RK - 1104C-E44TA
RR -1104A-44
RS -1104A-44T
RT -1104A-44TA
V - 1100 Series 6 Cylinder
VK - 1106-E60TA
P - 1100D Series 6 Cylinder
PJ - 1106D-E66TA
PO - Option Packs 1100 Series
N - 1100D Series 4 Cylinder ()
NH - 1104D-E44T ()
1300 / Peregrine Series
W - 1300 Series
WB - T6.466
WC - CC6.466
WD - T6.67
WE - CC6.67
WF - T6.76
WG - CC6.76
WH - T6.87
WJ - CC6.87
WK - UT6.76 HEUI
WL - UCC6.76 HEUI
WM - UT6.87 HEUI
WN - UCC6.87 HEUI
WO - 1300 Series Option Packs
WP - UT6.761(I) HEUI
WR - UT6.871(I) HEUI
WS - UCC6.871(I) HEUI
2000 / 3000 Series
4 - 3000 Series
S4B - 3008
S4C - 8M700 / 800TI Condor Marine
S4E - 3008 SI
6 - 3000 Series
6A - 3012
S6A - 3012
S6C - 3012
S6D - 3012
S6E - 3012 SI
8 - 2000 Series
8B - 2006
8C - Eagle / 2006
8D - Drops / 2006
8G - 2006 SI
S8B - 2006
S8C - Eagle / 2006
S8D - Drops / 2006
S8E - 2006 SI
S - 2000 / 3000 Series
SAA - E300TX Euro1 Eagle
SAC - E335TX Euro1 Eagle
SAF - E375TX Euro1 Eagle
SAG - E400TX Euro1 Eagle
SAJ - E340TX Euro2
SAK - E380TX Euro2
SAL - E410TX Euro2
SGA - TAG1A Elektropak / Gen Sets
SGB - TAG2 Elektropak / Gen Sets
SGC - TAG2A Elektropak / Gen Sets
SGD - TAG3A Elektropak / Gen Sets
SGE - TAG4 Elektropak / Gen Sets
SGF - TG Elektropak / Gen Sets
SGG - TG1A Elektropak / Gen Sets
SGH - TG2A Elektropak / Gen Sets
SGJ - TTAG Elektropak / Gen Sets
SGK - TWG2 Elektropak / Gen Sets
SGM - TAG5 Elektropak / Gen Sets
SGN - TAG2B Elektropak / Gen Sets
SGP - TAG1B Elektropak / Gen Sets
SHA - 2006 TWH
SIA - SI Combined Heat / Power
SIB - SI Combined Heat / Power
SIC - TSI Combined Heat / Power
SID - TSI Combined Heat / Power
SMA - M600TI Condor Marine
SMB - M700TI Condor Marine
SMC - M800TI Condor Marine
SMO - M600/700/800 Duffield Opt Kit
SPA - Industrial 17T
SPB - Industrial 12T1
SPC - Industrial 12T2
SPD - Industrial 12TA
SPM - Industrial 12TW
SPN - Industrial 26TW1
SXA - Prototype
SXD - Prototype
SXG – Prototype
SXI - Prototype
SXM - Prototype
SXP - Prototype
2300 / 2800 Series
2300 - 6 Cylinder
FGA - 14L TAG1 Generating Sets
FGB - 14L TAG2 Generating Sets
FGD - 14L TAG3 Generating Sets
2800 - 6 Cylinder
HGA - 16L TAG1 Generating Sets
HGB - 16L TAG2 Generating Sets
JGA - 18L TAG1 Generating Sets
JGB - 18L TAG2 Generating Sets
JGD
4000 Series
D - 4000 Series
DGA - TAG1 Generating Sets
DGB - TAG2 Generating Sets
DGD - TAG3 Generating Sets
DGE - TAG4 Generating Sets
DGF - TG Generating Sets
DGK - TWG2 Generating Sets
DGL - TAG Generating Sets
DGM - TWG Generating Sets
DGN - TWG3 Generating Sets
DGP - TEG Generating Sets
DGR - TEG2 Generating Sets
DGS - TEG3 Generating Sets
DGV - TWG2C Generating Sets
DIE - TESI Combined Heat / Power
DIF - TESI Gas Unit
DIG - 4016E61TRS
DME - Seaking – Marine

Transmissions and Brakes

1 Meritor WABCO toolbox
D and E Versions ,HABS, hpb, ESC, RSC, ECAS

2 Bendix� ACom(tm) Diagnostics
EC-17T, Generation 4 and 5, EC-30T, EC-60T (standard, premium and advanced),A-18T,MC-30T and the trailer antilock braking TABS-6 unit

3 Meritor ZF

4 Eaton Service Ranger
Vorad VS-400 Collision Warning System
Generation 2 Auto shift and Ultra shift Transmissions
Generation 3 Auto shift and Ultra shift Transmissions
Ultra Shift PLUS Transmissions
Lightning Transmissions
Hybrid Drivetrain Systems

5 Allison DOC
Allison1000,2000,3000,4000,
Cec2-5610,6610,8610,9610
CEC-MTB600,CLBT-V,HT700,B700
CEC-5,CEC-6,CEC-8,CEC9000

Package List:

XTruck USB-Link module PN:125032
6PIN deutsch and 9pin deustch”Y” PN:405048
16PIN J1962(OBD2) PN:448013
16PIN J1962(Heavy Duty)-j1708 PN:444009
USB cable PN:403098

2013.12V 64MB TF Card for Toyota IT2 (Toyota/Suzuki/Blank Card Available for Choose)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 14 Jan 2014 03:09:36 +0800

2013.12V 64MB TF Card for Toyota IT2(Toyota/Suzuki/Blank Card Available for Choose)

Description: This is memory card for Toyota IT2 Diagnostic tool for Toyota and Suzuki.

Software Version: 2013.12

Capacity: 64MB

Format for Choose: Toyota Software/ Suzuki Software/ Blank Card

Package List:

1pc x 64MB TF Card for Toyota IT2

Internal Hard Disk T30 HDD with IDE Port only HDD without Software 80G

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 14 Jan 2014 03:01:27 +0800

Internal Hard Disk T30 HDD with IDE Port only HDD without Software 80G

It is only HDD which you can used to input the software you need, it is used for MB STAR diagnostic tool, if your HDD is damaged, you can buy only the HDD from us. It is 80G.

Warranty: 1 month

Package list:

1pc x Internal T30 HDD 80G

2013.11V Mercedes Benz Star C3/C4 Software New 320G External HDD

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Mon, 13 Jan 2014 06:38:08 +0800

2013.11 Version Mercedes Benz Star C3/C4 Software New 320G External HDD

Note:
1. Only One Time Free Activation. After That, You Need To Pay 20USD From The Second Time
2. Supported Languages:English, Croatian, Czech, Danish, Dutch, Finish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Polish, Portuguese, Romanian, Russian, Spanish,Swedish, Turkish, Chinese,

Advantage of 2013.11 HDD:

1. Completely new hard disk, better quality.

2. Big compacity 320GB.

3. Newest software version: 2013.11

4. Provide one time free activation.

5. Can be used on MB Star C3 and MB STAR C4 without wireless.

2013.11 HDD Software Supported Functions:

1. 1989~up to now Car, Bus, Truck, Sprint, Smart ;

2. All electric system Diagnostic;(Do not include flash code)

3. Reading trouble code

4. Erasing trouble code

5. Live-data

6. Adaptation

7. Component testing

8. Maintenance

9. Information consultation

10. Component location diagram

11. Wiring diagram

Product software includes: (Version: 2013 )

1. D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IB M high-quality computer can realize the quick and accurate code reading and the whole car system testing

2. W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.

3. EPC.net : Electronic Parts Catalog

4. ST Finder:Part location finder

5. STARUTILITIES : the movement management system and self-test

Testable system:

ENGINE

AUTO-SPEED

AIRCONDITIONAL SYSTEM

SRS

ABS

ASR

MPL

Bz ORIGINAL ANTI-THEFT

DASX SYSTEM

KEYZESS GO SYSTEM

OBD-II SYSTEM

Packing List:

1pc x Newest MB STAR C3 software 2013.11 External HDD(New 320GB HDD)

NEW & Latest Land Rover Microcat Electronic Parts Selling System 2013.07

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Mon, 13 Jan 2014 05:25:30 +0800

NEW & LATEST Land Rover Microcat Electronic Parts Selling System

Land Rover Parts Catalog 2013

Version:2013.07

Supported Vehicle List:

LR3 2005 -

Defender 1987-

Discovery Series 1989-1998

Discovery Series II 1997-

Freelander 1996-

Range Rover Classic 1986-1991

Range Rover Classic 1992-1994

Range Rover 1995-RunOut

Range Rover 2002-

Range Rover Sport 2005 -

Package including:

Quantity of CD: 1DVD

Date: 2013

Setting Up Offline Mode In Latest DAS Free Shipping

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Fri, 10 Jan 2014 06:40:41 +0800

Setting Up Offline Mode In Latest DAS

Instruction:

After you download the software, please send the ID to us, we will calculate key for you. Or you give us teamviewer id and password, we online set up for you.

Description:

As you know the offline programming has been switched off on DAS beginning from DAS 012010. So now when you want to program a control unit for whatever reason you will need to go online to aftersales platform which of course will require a dealer login and a password and only then you will be allowed to program the control unit. And this will be possible only if your control unit contains the software version older than the software version available. If the software inside the control unit is the already latest one and you still need to program it you will get a message saying that “No newer software was found”. (Soon there will be a solution how to avoid this message).

Display:

NYO V4.0 Full for Odometer RadioCar Airbag Navigator Free Shipping

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 09 Jan 2014 07:49:02 +0800

NYO 4.0 is a database application specially designed for car-radio unlocking and dashboard recalibration. This program allows you to create your own database or simply use an existing. It also includes own script interpreter and file commander. Designed for car-radio unlock and dashboard recalibration, Calculate, Rewrite, Identify Scripts.

NYO V4.0 Full for Odometer RadioCar Airbag Navigator

Description:

Note: No CD will be shipped for this item. We only provide download link after payment is done.

Micronas OBD TOOL (CDC32XX) V1.8.2 for Volkswagen

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 09 Jan 2014 07:48:03 +0800

Micronas OBD Tool (CDC32XX) programmer for Volkswagen and Skoda cars from year 2006.06 by OBDII diagnostic. VAG Micronas CDC32xx programmer supports odometer correction, EEPROM read/write, it is a multi-function and reasonable obd2 product.

Micronas OBD TOOL (CDC32XX) V1.8.2 for Volkswagen

Highlights:

1. Update By Email
2. It can do mileage correction for VW cars (after 2006.06) by obd2.
3. It can read pin code for VW cars (after 2006.06) by obd2.
4. It can do EEPROM read/write for VW cars (after 2006.06) by obd2.
5. It supports multi-language,including English,Spanish and Chinese.

Description:

Add NEC24c32 & NEC24c64 algos (some algos for Amarok)
Fix bug of km correction on A4/Q5
Add 95320 immo function.
Require firmware V2.0.5 or above
Please update firmware to V2.0.5 before use

Update Version: V1.7.9
Add Passat B7 Color TFT Dash immo and key function support.
(Free for customers who have NEC24C64 authorization)

Update Version: V1.7.4
Fix bug of change km on A3/TT.

Update Version: V1.7.3
Fix bug of change km on A4.
Fix bug of communication with car.

Update Version: V1.6.9
Add algo for NEC24c64

Update Version: V1.6.8
Add Change Immo State function for RB8.
Fix a problem of change km on A3/TT.

Supported Cars:

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
EEPROM read/write
Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM read/write
Tiguan, Eos from year 2008+:
Odometer correction, PIN code read, EEPROM read/write
Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
Odometer correction, PIN code read, EEPROM

Test Environment Display:

1. Read KM

2. Write KM

3. EEPROM

Package List:

1pc x Micronas OBD TOOL (CDC32XX) V1.7.7 For Volkswagen Cable
1pc x CD Driver

Mitchell Ondemand 2011.Q1 Free Shing

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 09 Jan 2014 02:48:39 +0800

Mitchell Ondemand 2011.Q1, the accuracy of consistent with the original maintenance manual (some more accurate than the original manual, because in the editing process corrected the original maintenance manual on the many errors), and to maintain the unique style and the Mitchell Database Query System.

Mitchell Ondemand 2011.Q1

Mitchell software must be installed on windows xp system,can not work on windows 7 system.

Mitchell, performance solutions for the auto collision and medical claims industries.Mitchell AUTO repair database, the accuracy of consistent with the original maintenance manual (some more accurate than the original manual, because in the editing process corrected the original maintenance manual on the many errors), and to maintain the unique style and the Mitchell Database Query System.

Mitchell database has the following characteristics:

1. Rich in content and accuracy

Database contains from 1983 to date, the United States, Europe, Asia and around the world 51 automobile manufacturers of nearly 5,000 models of the maintenance data. You just select the vehicle's production era, manufacturers, maintenance of vehicles to enter the appropriate directory, the directory in a different maintenance model according to the engine, transmission type, etc. have a more detailed classification of the different, so you find information more quickly , more accurate.
If you can not determine the age of car, model, the database also provides a 17 yards (VIN - Vehicle Identification Number) decoding of information. You just found the car 17 yards, you can use it to accurately understand the detailed parameters of the car.
Mitchell database model precise positioning in the "model year", which greatly ensure the accuracy of the information, which is a common book on the market data can not be compared, which is the U.S. electronic maintenance data and complete monopoly of the most important reasons.

2. A complete and unified circuit

In the database each model has a 40-80 system, circuit, and the right circuit diagram of a pin for each computer, every line of the definition and color have been described. Because all the vehicle manufacturers to provide information on different formats, taking into account the customer's convenience, Mitchell did not like the other companies that simply scan down the graphics, but to re-use CAD drawing, so that all circuit clear and precise style, unified, easy to inspection. Mitchell circuit up to 10 a few of the original system, circuit analysis, re-drawn into a 2-3 circuit, reading more convenient. In other words, as long as you can read a model of the circuit, you can use a database of all models of the circuit for analysis, diagnosis.

3. Detailed and accurate location map of electrical components

Today's vehicles are increasingly complex, more and more electronic components, and the larger structural differences in different cars. Maintenance personnel are often unable to determine the location of an electronic component helpless. The database provides the location of electrical components for all models, in addition to text descriptions, but also accompanied by diagrams, clear, easy to use.

4. Parts decomposition diagram and parameters

For each type of car, Mitchell database, not only the demolition of a variety of assembly installation steps in detail, but also a clear and accurate parts exploded view of the parameters of reference, make your vehicle more convenient and faster.

5. Technical Service Bulletin is the essence of Mitchell Database

Car manufacturers have produced models for every year a large number of technical service bulletin issued, covering a variety of the latest technologies in the vehicle information, such as maintenance tips, safety recall information, etc., to repair workshop helpful. In the Mitchell database, you can either find in the assembly, respectively, with the assembly-related technical service bulletin, but also can simultaneously search all of the technical service bulletin, clarity, easy to use.

Digimaster 3 Digimaster III Original Odometer Correction Master with 980 Tokens

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 09 Jan 2014 02:17:32 +0800

Digimaster 3 also is called Digimaster III with 980 Tokens or shortly D3 is new developed odometer correction master. It works with various types of adapter you can easily achieve odometer correction, Audio decoding, airbag resetting, engine ECU resetting, IMMO, programming key for Benz & BMW etc

Digimaster 3 Digimaster III Original Odometer Correction Master with 980 Tokens

Highlights
1. Supported Language: English Only
2. Update Method: Update Online
3. It contains a high performance hardware platform which takes high-speed CPLD and the ARM11 processor as the core technology
4. It contains the advanced technology of programming new keys for BMW and Benz, CAS-BDM reading/writing and resetting; 35080V6 erasure etc. large numbers of pictures and particular description makes your operation pleasant

Attention: All digimaster 3 hasn't been registered before shipped out. So you need to register first after you get it. Customer who want buy digimaster 3 please do have basic knowleage about chip desoldering.

Digimaster III Main Functions:

1. Odometer correction
2. Audio decoding
3. Airbage reset
4. ECU programming
5. PIN Code Reading
6. BMW key programming

Newly Update for Digimaster III

1. DigiMaster-III Newly added key programming function
It is applicable for high-class cars such as Mercedes Benz and BMW. Innovative automatic mode for key programming technology,the key programming complete in one go, effectively ensure the security of reading and writing data.
2. DigiMaster-III New Generation Core Framework
Applying the new G3 platform of Yanhua Tech and the innovative consumption mode of "Pay as you go"support the latest car, global synchronic upgrade, extend and integrate functions freely.
3. DigiMaster-III Intelligent Operation Platform
Upgrade the single-task system into intelligent multi-task and multi-thread operation system, extend functions freely and unlimitedly.
4. Upgrade the single-task system into intelligent multi-task and multi-thread operation system, extend functions freely and unlimitedly.
5. DigiMaster-III Comprehensive Upgraded Operation Interface
It breaks away from the original monotonous static interface, based on IE core technology to support rich and dynamic effects as well as advanced skin interface. And it is more beautiful and friendly, supports for many language around the world.
6. DigiMaster-III High Definition Digital Screen
Upgrade the low definition LCD color screen (320X240) to the imported HD digital TFT color screen (800X480) which applying the precision touch technology

Digimaster 3 Special Features:

1. Support OBD-II interface odometer adjustment of Volkswagen, Audi, Benz, BMW and BMW 7 Series models: E65 CAS and the 2009 Audi A6L and Q7.
2. Read BMW CAS1/ 2/ 3 data by CAN interface.
3. Online reading BMW CAS1/ 2/ 3/ 3+/ 4, Mercedes-Benz EIS EEPROM and FLASH data by BDM.
4. Support the Mercedes-Benz S, C, E, odometer and EIS adjustment; Porsche, Ferrari, Bentley and other European luxury cars odometer adjustment; Chinese domestic car MCU and engineering machinery odometer adjustment;
5. Support the MOTOROLA/FREESCALE series CPU (including some CPU flash) data read and write.
6. Support key programming for Mercedes Benz and BMW series cars.

Digimaster 3 Odometer Correction

vehicle including cars from European, American, Japanese and Korea. Detail list as follows:
Alfa Cadillac Daihatsu Aston Martin Chrysler Honda Audi Ford Hyundai Bentley GM ISUZU BMW Lincoln KIA Benz Lexus Citroen Mazda FIAT Mitsubishi Ferrari Nissan Jaguar Proton Lamborghini SSangYong
Lancia Subaru Lotus SUZUKI Man Toyota Opel peugeot Porsche
Renault Rover Saab Skoda Volvo Volkswagen Wiesmann
Truck Forkman Maserati
Othe vehicle Motorcycle Truck

Digimaster 3 Airbag Resetting

Airbag-Audi
Airbag-Mitsubishi
Airbag-Chrysler
Airbag-Nissan
Airbag-China
Airbag-Opel
Airbag-Citroen
Airbag-Peugeot
Airbag-FIAT
Airbag-Renault
Airbag-Ford
Airbag-Rover
Airbag-GM
Airbag-SSangYong
Airbag-Honda
Airbag-Subaru
Airbag-Hyundai
Airbag-SUZUKI
Airbag-KIA
Airbag-Toyota
Airbag-Mazda
Airbag-Volkswagen
Airbag-Samsung

IMMO
Peugeot Citroen Audi

Key Programming
BMW Benz

Digimaster 3 Connector Instruction

1	25 Pin adapter connector	8	15 Pin adapter connector
2	Mini USB Connector	9	Power adapter
3	USB Mouse Connector	10	switch
4	RJ45 LAN Connector	11	Power Indicator Light
5	Earphone Connector	12	Touch-Pen Connector
6	SD Card Connector	13	Keyboard
7	Microphone Connector	14	7 Inch LCD Touch-screen

Keystoke	Function Instruction
F1	Backspace
keyboard	open/close soft-keyboard
ESC	ESC
OK	Enter

Digimaster 3 Adapter List

OBP Adapter

ICP Adapter

NEC Adapter

NEC 14-PIN cable

W203/W220 Adapter

TMS370 Programmer

MCU Adapter

K&CAN Adapter

CAN-OBD DMI

VW AUDI OBDII

BENZ 38PIN

BENZ OBD

BMW E36

BMW E36 Meter Socket Connecting Cable

BMW E38/39

BENZ 95S

JAGUAR11DU

C/E CLASS

Ford Ranger

9S12 Adapter

Lexus LS400 Adapter

Grand Cherokee Adapter

W211 Adapter

E65/E66 Adapter

CAN&BDM Programmer

BMW CAN Adapter

MC705-PROG Adapter

MC711-PROG Adapter

NEC KEY

MC705E6

CAS OBD II

NXP

IAR key

ESL

29FXX

Token Card Recharge Introductions:

1. Token Card only used for CKM100, CKM200,DIGIMASTER III.

2. Steps: Go to Management

choose Payment

Enter the ID and Password when the following dialog box display.

3.Tokens mainly used on new update costs for high-end vehicle, such as OBD mileage adjustment for Benz, BMW, VW, Audi and so on.

4. Token cost depends on vehicle model. It costs 2 to 60 tokens for different cars. Details please refer to

under

FIAT KM TOOL

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 07 Jan 2014 10:37:41 +0800

FIAT KM Program TOOL via OBD2

Fiat KM Tool Support list:

FIAT CAN KM TOOL via OBD2
Fiat Punto 99-2002 motorola
Fiat Punto 99-2002 nec
Fiat Punto 2002-2006 nec
Fiat Ducato 2006/2007 95080
Fiat Doblo 99-2006 motorola
Fiat Doblo 99-2006 nec
Fiat Panda 2004-2007 95040
Fiat Panda 2004-2007 95080
Fiat Idea 2004-2007 95040
Fiat Idea 2004-2007 95080
Fiat Croma 2005-2007
Fiat Bravo 2005-2007
Fiat Grande Punto
Fiat Ducato 2006...
Peugeout Boxer 2006...
Citroen Jumper 2006...
Lancia Musa 2006-2007
Masarati Quattro Porte 2005-2006

VAG KM+IMMO Tool By OBD2 V1.8.2 Latest Version

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 07 Jan 2014 03:44:53 +0800

VAG KM+IMMO tool by OBD2 can program Volkswagen ,seat and Skoda cars from year 2006.06 by OBDII diagnostic. You can do odometer correction, PIN code read, EEPROM read/write with VAG KM+IMMO tool by OBD2.

VAG KM+IMMO TOOL BY OBD2

Note:
Require Firmware V2.0.5 or Above. Please Update Firmware to V2.0.5 Before Using it
Multi-language supported,including English,Spanish and Chinese.

New Update Version: V1.8.2
Add NEC24c32 & NEC24c64 algos (some algos for Amarok)
Fix bug of km correction on A4/Q5
Add 95320 immo function.

Update Version: V1.7.9
Add Passat B7 Color TFT Dash immo and key function support.
(Free for customers who have NEC24C64 authorization)

Update Version: V1.7.7
Add NEC95320 support. (11' Golf, 11' Tiguan)

Update Version: V1.7.4
Fix bug of change km on A3/TT

Update Version:: V1.7.3
Fix bug of change km on A4.
Fix bug of communication with car.

Update Version: V1.6.9
Add algo for NEC24c64

Update Version: V1.6.8
Add Change Immo State function for RB8.
Fix a problem of change km on A3/TT.

Update Version: V1.6.7
Require firmware V2.0.3 or above
Fix a problem of change km on some RB8 dash. RB8 authorization is free for those customer who purchase VAG KM+IMMO tool.

Update Version: V1.6.6
Add function: AUDI A3,TT
Fixed the problem of can't change km with A5,Q5,A4. You need purchase authorization for it, and it can do audi only after 2008.

Free RB8 Authorization for VAG KM+IMMO Tool Customers

Thanks for your support, we'll authorize RB8 for free to customers who has purchased CDC32 & Moto & NEC24c32 modules.If follow 3 items are all "Yes" in your "Device Info", you'll get RB8 authorization for free.
CDC32xx : Yes
Moto MM7 (Golf6,Tiguan) : Yes
NEC24C32 : Yes
Please update your device to get the authorization.

Notice
There is a problem in HID driver code of original VAG IMMO K+CAN TOOL and CDC32xx cables, when you upgrade the device,may cause data loss to device,and resulting device not work. We have released a new version to solve this problem, we add 4th generation key functions to show our regret. we suggest you to upgrade as soon as possible to solve this problem. If damage occurs during the upgrade process,please send the product back to the original manufacturers for repair and send back to you,but we do not bear the freight.

Newest Added Function: VAG KM+IMMO Tool Process of Adding Dealer Key with Tango

1. Condition 1: At least one key can be used.
1) Connect "VAG KM+IMMO TOOL" to both PC and car.
2) Click "EEPROM" button, read EEPROM and save it for backup.
3) Click "Dealer Key" button ,opel "Dealer key" Dialog.
4) Use the prompt key chip to make key.
NEC24C32 and NEC24C64; Megamos 48
CDC VW: TP23
CDC AUDI: TP25
CDC SKODA: TP24
CDC SEAT: TP22

5) Switch to Tango, read "Word 1" data and "Key ID" data.

CDC32xx Module Options

Supported Cars:

Golf, Golf+ from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
odometer correction, PIN code read, EEPROM read/write;
Passat B6 from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
EEPROM read/write;
Bora, Jetta from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
odometer correction, PIN code read, EEPROM read/write;
Touran from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
odometer correction, PIN code read, EEPROM read/write;
Caddy from year 2007 (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
odometer correction, PIN code read, EEPROM read/write;
Tiguan, Eos from year 2008+: odometer correction, PIN code read, EEPROM read/write;
Octavia (with MICRONAS CDC3272 or CDC3217/97 and 24C32 EEPROM):
odometer correction, PIN code read, EEPROM read/write

NEC 24C32 Module Options

Supported Cars:

VW Golf 6 - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Passat , Passat CC - 2009+ with NEC and 24C32 EEPROM - odometer programming by OBDII;
VW Tiguan - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW T5 - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Polo - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Octavia 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda SuperB - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Roomster, Yeti - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Seat Ibiza - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Multivan - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW EOS - 2009+ with NEC and 24C32 EEPROM - odometer programming by OBDII;
VW Caddy - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Scirocco - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Bora - 2010+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
VW Jetta - 2010+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Fabia 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Altea - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Yeti - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Altea - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;
Skoda Exeo - 2009+ with NEC and 24C32 EEPROM - odometer programming and immobiliser data read by OBDII;

GOLF6 MM7 Module Options

Suppoted Cars:

VW Golf 6 - 2010 with MM7 (9S12) EEPROM - odometer programming and immobiliser data read by OBDII;
VW Tiguan - 2010+ with MM7 (9S12) EEPROM - odometer programming and immobiliser data read by OBDII;

Software Display

FVDI ABRITES Commander For Porsche (V4.1)FVDI ABRITES Commander For Porsche (V4.1)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 04 Jan 2014 13:38:54 +0800

FVDI ABRITES Commander for Porsche(V4.1), if you buy this set, we will send you Hyundai, Kia and Tag key tool software for free.

FVDI ABRITES Commander For Porsche (V4.1)

Features:
1. Software Version: 4.1
2. Language: English Only
3. Buy Porsche software get Hyundai/Kia/Tag Key Tool software free

Porsche FVDI Description:

ABRITES Commander for Porsche is professional software for diagnostic of Porsche vehicles. It is capable to perform a diagnostic of any unit. It provides some unique functions, which are not supported by any other diagnostic tool.

Porsche FVDI Supported Vehicles:

Carrera GT

Carrera GT2 (996)

Carrera GT3 (996)

Boxster (986)

Boxster S (986)

Boxster (997)

Cayman (987)

Cayenne (955)

911 (997)

911 Turbo (996)

911 Turbo (997)

911 Carrera 4 (996)

Boxster 991 (2012+)

911 991 (2012+)

Cayenne 958 (2011+)

Panamera 970 (2010+)

Porsche FVDI Standard Diagnostic Functions:

For all electronic control units reading identification data

For all electronic control units read error (DTCs)

For all electronic control units clear error (DTCs)

For 911 997, Boxster 987, Cayman, Cayenne electronic control units - live data

For 911 997, Boxster 987, Cayman, Cayenne electronic units read/write coding

Broadcast - for the chosen model - scan all units and clear all DTCs

Porsche FVDI Special Functions:

Engine Control Unit

- ME7.x, ME7.5, ME7.8- Read/Write EEprom, Flash, Read Component Security bytes, Read Sec.access code, ECU Data

- ME5.2, ME7.2 - Read EEprom

- ME 7.8 - Porsche 9x7, 9x6 -Read EEprom

Instrument Cluster K-Line

- Porsche Cayenne - Read/Write EEprom, Read/Change odometer

- Porsche 911, Boxter, GT2, GT3 (9x6) with 93c56 - 1998 - 07/2001 year - Read/Write eeprom, Read/Change odometer

- Porsche 911, Boxter, GT2, GT3 (9x6) with 93c86 - 08/2001 - 2005 year - Read/Write eeprom, Read/Change odometer

Instrument Cluster CAN

- Porsche Cayenne - Read/Write EEprom, Read/Change odometer

- Porsche 9x7 - Mileage recalibration, Read/Write EEPROM, Reset service interval, Total distance, Oil level measurement

Dump Tool

- IMMO - Kessy - Porsche Cayenne [93c86] - shows Sec.access code, Keys data, VIN, Immo number

- ECU ME7.x Reset Component protection data

- ECU ME7.x Security code / Checksum calculator

- Change Odometer ECU ME9 [95320] - Porsche 997

- Change Odometer 95P08 - Porsche 996

- Change Odometer 95P08 - Porsche 997

Porsche FVDI Advanced Functions:

Calculate teaching code from Alarm system - Porsche (9x6)

Key Learning

- Learn transponder/key - GT2 996, GT3 996, 911 996, Boxster 996, Carrera GT

- Learn remote control - GT2 996, GT3 996, 911 996, Boxster 996, Carrera GT

- Learn transponder/key - Cayenne

- Learn transponder/key - 911 997, Bosxter 997, Cayman

Pictures Display as Follows:

FVDI ABRITES Commander For VAG VW Audi Seat Skoda (V21)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 01 Jan 2014 03:26:11 +0800

ABRITES Commander For VAG - VW, Audi, Seat, Skoda FVDI VAG(V21), it supports Multi-Language and with latest software

FVDI ABRITES Commander For VAG VW Audi Seat Skoda

Highlights:
1. Software Version: 21
2. Languages: English, Germany, Spanish, French, Russian, Italian, Danish, Czech, Chinese, Bulgarian

FVDI Commander for VAG is a Windows PC based diagnostic software for the vehicles from VAG. With the help of this tool you can perform operations with vehicles from the VAG group, which are in most cases unsupported from the producer diagnostic testers. The ABRITES Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.

FVDI Commander for VAG Highlights:

1. Reading Pin code by OBDII
2. Programming keys by OBDII. Preparation of dealer's keys.
3. Mileage recalibration by OBDII
4. Clearing crash data DTCs by OBDII
5. Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.
6. Exchange speed limit of MMI-TV system
7. Coding calculator - supported short/long coding
8. Synchronization/Adaptation KESSY and ELV

FVDI Commander for VAG Standard diagnostic functions:

1. Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line
2. For all electronic control units reading identification data
3. For all electronic control units read error (DTCs)
4. For all electronic control units clear error (DTCs)
5. Output tests
6. Control unit coding
7. Scan all units
8. Broadcast requests
9. Measured values
10. Adaptation

FVDI Commander for VAG Special functions:

Instrument CAN
- Mileage recalibration by OBDII - VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, VW Passat CC, VW Amarok, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...
- Added support for VDO Instrument Cluster 2006+
- Read/Program memory of instrument cluster immobilizer
- Reading security access code of the IMMOBILIZER
- Reading security code (PIN) and component protection by OBDII - VW CRAFTER
- Read/Write immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII
- Read/Write immobilizer related data
EZS - Kessy (Q7/A6/Allroad)
- With this function you can prepare dealer key/learn dealer key
- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)

Instrument K-Line
- With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)
- You can Read/Change odometer value
- Read PIN code
- Read/Write eeprom
- Read ROM/Flash from the Instrument cluster
- Automatic removing of "DEF error" for Audi A4

Instrument cluster BOSCH RB8
Engine Control Unit
- Read EDC17/MED17 flash memory
- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flash memory via OBDII (K and CAN). Calculation of
checksums while programming, ME7.1.1, MED9.x, ME7.5)
- Read/Write flash counters (EDC16)
- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)
- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)
- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)
- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)
- Mileage recalibration (EDC15, EDC16)

Component Protection Manager
- Component Protection Manager - adaptation of spare part (used electronic control units) and programming component protection of Audi A6/Q7/Allroad/A4/A5/Q5

ECU adaptation by OBDII
- ECU adaptation by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30
BCM2 - Audi A4/A5/Q5 2007+ key programming
- The special function makes possible to learn keys for A4/A5/Q5 2007+ vehicles with the BCM2 immobilizer

Steering Lock adaptation
- The window "Steering lock adaptation" can be used for adaptation of steering lock control module to the VW Touareg/VW Phaeton/Porsche Cayenne/Bentley Continental/Audi A8.
This adaptation can be by CAN TP2.0 or K-KWP2000

TV activation ED1/ED2
- Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF

Key programming/adaptation

- Programming keys by OBDII (VAG with 16 bytes Component Security) - VW Crafter, Audi R8, VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco,
VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+,
Seat Exeo 2009+, Seat Ibiza 2009+, ... Free for owners of AN024+AN026

- UNLIMITED production of TP22/TP23/TP24/TP25 transponders from a Megamos 48. Free for all owners of AN024, ZN001

- No more precoded transponders (TA2/TA3/TA4/TA5) are used for the key-learning. Instead any Megamos 48 Crypto transponder can be used. Free for all owners of ZN001
- Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2). Free for all owners of AN024, ZN001
- LAMBORGHINI GALLARDO
- With this function you can learn key/transponder to the vehicle

Dump Tool
- With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the corresponding unit

Airbag
- Read/Write complete EEPROM of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5..., Skoda Octavia II ..., Seat Altea ...
- With this special function you can Read/Write EEPROM memory of the airbag module
- Clear the crash data of the airbag module

Custom Read/Write
- Using this application you can read/program memory in some electronic control unit

PIN Convertor

Service interval
- Using this function you can perform reset of the service reminder, reset of the service interval parameters or change service interval options
- Service intervals reset for the models with UDS diagnostics

Remote control adaptation
- Using this application, you can learn remote controls

Navigation
- Using this application, you can enable/disable the "Eject" button of the "Navigation" system
Cruise control system
- Using this application, you can activate/deactivate a cruise control system and change the related
steering wheel electronics( SWE) configuration if SWE unit is available

Brake Pads Change
- Using this application, you can "Open rear parking brake for pad change", "Close rear parking
brake", perform "Parking brake function test"

Technical Specification:

1. K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector
2. ISO14230 compliant
3. Single wire CAN bus multiplexed to different pins of diagnostic connector
4. Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector
5. Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector
6. CAN bus GMLAN, ISO14229, ISO15765, J1939, ISO22901 compliant
7. USB interface to the PC
8. Supply voltage 8..30V DC
9. OBDII cable
10. Updatable firmware
11.Commander for VAG - VW, Audi, Seat, Skoda Supported languages: English, German, Spanish, French, Russian, Italian, Danish, Czech, Chinese, Bulgarian.

Software Display

New Volvo Serial Diagnostic Cable

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 31 Dec 2013 12:16:22 +0800

Volvo Serial Diagnostic Cable is PC based code reader and live data scan tool for Volvo cars including 800 Series, C70, S40, V40, S70, V70, 900 series, S90 and V90.

New Volvo Serial Diagnostic Cable

New Volvo Serial Diagnostic Cable, 232 Chipset based design, works excellently volvo fault code reader 1.3 serial version Serial port design, supports the most chanllenging time-critical application like serial EEPROM programming.

Supported Software:

On Board Diagnostics Versions: 1.3

Volvo FCR Communication Interfaces to connect a Volvo Vehicle to a PC

What can this interface be used for?

This cable is used to connect a volvo vehicle to a PC for on-board diagnostics (OBD). It is fully compatible with the diagnostic software version 1.3 from Volvo FCR. Volvo FCR is a software program that turns your PC into a sophisticated Volvo diagnostic tool.

What is Volvo FCR?

Volvo FCR is a Windows-based Diagnostic Software for Volvo that emulates the functions of the dealers` very expensive proprietary scan tools. As the first aftermarket Volvo-Tool, it has the following features:

Volvo control module coverage includes:

Engine - Petrol and br />-ABS

Automatic transmission

SRS - airbag and other protection systems

Driver and passenger seat memories

Instruments, including service light reset

Climate control - air conditioning

Immobilizer

Alarm

Road traffic information

Additional heater

Product Features and Benifits:

Supports Volvo FCR version 1.3 or older

Precision-molded diagnostic connector made to fit all volvo vehicles, even those with "tight" trim around diagnostic socket

LED light indicating communication status

High quality UL certified Serial Cables (equivalent to CE)

Built-in, Electronic Protection from the "Aftermarket Radio Problem"

How to Use?

For laptops and PCs, download the shareware 1.3

Run it and follow the prompts to allow it to install itself.

Note: You must install Volvo FCR on your PC`s hard disk -- it will not work properly if you try running it directly from a floppy or CD. However, you can use a floppy or CD to move the distribution file from a PC with internet access to another PC that does not have internet access.

Connect the interface between the computer and the car by plugging one end of the interface into a Serial (RS232) (or USB port ) on your PC and the other end directly into the OBD-II port present passenger vehicles.

Turn the car`s ignition switch ON. No need to start the engine.

Start the Volvo program,

Now it works. Make sure the software can reliably access all the control modules that it should in your car.

What are the system and computer requirements?

A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC`s, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.

What are the system and computer requirements?

A PC running Windows: It is recommended to use at least a Pentium-100 (or AMD equivalent) with 16MB of RAM and Windows 95 or newer. Volvo FCR may work on some lesser PC's, but anything less than the above recommendation is unsupported. Windows 95, 98, ME, NT4, 2000, and XP are all fine. Available disk-space is a total non-issue, Volvo FCR requires less than 1 MB.

Package List:

1pc x VOLVO Serial Cable

1pc x CD Drive

Autosnap KP818 Auto Key Programmer

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 31 Dec 2013 05:40:21 +0800

Autosnap� KP818 Auto Key Programmer is a handheld device for programming keys in immobilizer units on vehicles. Autosnap� KP818 has a simple and robust design, to make your vehicle service experience much easier!

Autosnap KP818 Auto Key Programmer

Function

1. New keys programming
2. Reads keys from immobilizer's memory
3. New immobilizerprogramming
4. New ECUprogramming
5. New mechanical key number programming
6. Vehicle Identification Number programming
7. Reset ECM & reset immobilizer
8. Easy to operate by the guided menu programming
9. New remote controller programming
10. With full and strong database for the most important vehicle makes
11. Upgradeable via web-based download over standard USB cable

Vehicle Coverage

Please check our techinical service vehicle list.

Specification

Display: Backlit, Colorful, 320x240 pixel
Operating Temperature: 0 C to 60�C (32 to 140F�)
Power: 10 to 15 volts provided via vehicle battery

Package List:

1pc x Main Unit
1pc x User's Manual
1pc x Extension Cable
1pc x CD software
1pc x USB cable
1pc x OBDII Adapter
1pc x Optional Adapter Kits (Honda 3pin)
1pc x Carry case

Bmw INPA K+CAN USB Interface

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 31 Dec 2013 02:54:52 +0800

Interface USB OBD2 for BMW - INPA/Ediabas - K+DCAN allows full diagnostic of BMW from 1998 to 2008 (all functiosn as in OMNITEC interface). Build in 2 lines K and D-Can magistral

Bmw Inpa K+CAN

Features

- Read and delete errors
- Adaptations
- Driver programming
- Applu coding
- And others...

Supports Protocols:

1. Fast magistral D-CAN and PT-CAN (500 kbit/s)
2. Slow magistral K-CAN (100 kbit/s)
3. Standard BMW protocol (BMW OBD interface).

D-CAN for:

- E60, E61 od 03/2007
- E83 od 09/2006
- E81, E87 od 03/2007
- E90, E91, E92, E93 od 03/2007
- E70 (new model X5)
- R56 (new model MINI)

PT-CAN, K-CAN - fully switchable speed of migistral CAN - ou can diagnose driver without any car

Protocol "BMW OBD Interface" for Older Cars:

from 1995 to 1998 (don't need K-line).
from 1998 to 03/2008 (all models)

2.027V Double Board Diagnostic System HDS

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sun, 29 Dec 2013 10:23:53 +0800

HIM (H-onda & Acura Diagnostic System)is the latest diagnostic equipment for H-onda vehicles. Diagnostic functions available for vehicles of H-ONDA/ACURA from year 1992 to 2011.Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc. It supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform.

Double Board Diagnostic System HDS

Software Version: 2.027 this one is double board.

Hardware and Software Requirements:

PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later). Hard disk drive with at least 400MB of free space
CD-ROM drive (if a high-speed Internet connection is not available)
RS232 port required to connect PC to HIM (PC version software only)
Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
Internet connection (high-speed connection recommended)

Description:

HIM (H-onda & Acura Diagnostic System)is the latest diagnostic equipment for H-onda vehicles.
Diagnostic functions available for vehicles of H-onda/ACURA from year 1992 to 2011.
Test coverage: Dynamical, Body, Chassis, ABS, SRS, Anti-theft, etc.
It supports CAN BUS system, and it can re-program the Auto ECU. This HIM is based on PC operation platform.

Function:

1.Functions Supported by H-onda/Acura Protocols

1) Reading and decoding fault codes from control blocks memory
2) Deleting fault codes
3) Displays system current parameters in digital form
4) Displays system? current parameters in graphical form
5) Combined displaying of data
6) Management of executive devices
7) Logs keeping - writing and keeping of digital parameters in memory
8) Special functions - changing of permissible settings of blocks, programming etc.

2.Functions Supported by OBD-II Protocols

1) Mode $01 - Displays system current parameters in digital form (up to 8 parameters at once);
2) Mode $02 - Displays parameters of freeze frame;
3) Mode $03 - Reading and decoding of fault codes from control block? memory;
4) Mode $04 - Deleting of fault codes (memory clearing);
5) Mode $05 - Displays results of oxygen sensors;
6) Mode $06 - Displays results of changeably controlled systems and components;
7) Mode $07 - Displays results of constantly controlled systems and components;
8) Mode $08 - Management of executive devices;
9) Mode $09 - Displays car identification info.

Package List:

1pc x HIM with OBDII Cable
1pc x DVD
1pc x 3 Pin Cable
1pc x RS232 Cable

Universal Car Diagnostic Doctor JBT-VGP

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sun, 29 Dec 2013 04:49:03 +0800

Universal Car diagnostic Doctor JBT-VGP is the universal auto scanner, which can diagnose all Asian, European and American cars, such as BMW,BENZ,VW,TOYOTA, HONDA,MITSUBISHI,ISUZU, MAZDA,FORD,Buick CHERRY,SOUTHEAST,GEERLY, and so on.

Universal Car diagnostic Doctor JBT-VGP

Description:

Universal Car diagnostic Doctor JBT-VGP was color screen, self-learning function, warning function, and conveniently online upgrading function.
Universal Car Diagnostic Doctor JBT-VGP diagnose all Asian, European Oceania and American cars

It is the OE Supplier for VW, Audi, Nissan, Mitsubishi, Southeast .......;It has the original protocol for these cars, so it can realize almost all the functions for these cars, such as immobilizer, service reset, injector programming, and other functions.

Specification:

Type: Universal Auto Diagnostic tool
Voltage: 12V
Rate: 9-15w
Certificates: CE ISO9001 and ISO 14001
Brand: JBT
Working Condition:
Temperature:-40�C~+50�C
Relative Humidity: <90%
Screen: Color display
Platform: Self-researching BT-DDS
Special functions: Self-Learning and Judging/Warning/Data Store and printing
Update: Online update
Warranty: Main unit for 3 years and Cables for 1 year
Outer packing: Carton
Inner: Plastic Suitcase,

Testing Benz:
It is reading the DataStream of Benz, and it has 4 creative inventions:

I.SELF-LEARNING & JUDGEMENT:

Self-learning & Judgment function can help learn the standard data streams of vehicles automatically, whose data streams can be used in future as standard scopes. With these scopes, JBT-CS Series can help check whether the data streams of any same kind of cars are normal or not.
1. Any JBT-CS Series auto scanner can learn the data streams of cars as soon as connected to DLC of healthy cars. Explanation: When we have the cars that working well, we can record and store the data streams of the cars and the data streams can help set the maximum and minimum scope automatically due to the collected data from the healthy cars.
2. Comparing data streams and analyzing
Explanation: When we repair the same kind of other cars, we could use the data stream collected from healthy cars to do the comparison with the data streams being tested. If the data streams being tested are beyond the scope, it will display with special colors in order to inform maintenance people that the data streams are abnormal, technicians can judge what is wrong with the cars by the highlighted items.
3. Rename the data streams which have been learned.
Explanation: JBT-CS auto scanner supplies positions for users to store the data stream of different cars.

II. Over-Scope Alarm Display

JBT-CS auto scanner supplies the reference scope that common use when cars are idle. When the cars move, if the data stream is beyond the reference scope, it will be displayed with special color in order to help maintenance people judge cars problem.
1. Reference scope analysis.
Explanation: JBT-CS has reference scope that common use when cars are idle. It is convenient for users to compare the data stream being tested in order to judge cars trouble.
2. Warning color display.
Explanation: The reference scope supplied by JBT is the normal scope when the cars are idle. When the data stream being tested is beyond the scope, it will be displayed with special color, meaning the data stream is not normal, maintenance people should check the cars troubles according to the data streams which is displayed with color.

III. Data stream Memory and Printing

Characteristics:

Storing data stream as customers' like. Data stream could be printed out by JBT printer.

IV. Personality Operation Setting

JBT-CS auto scanner is color screen, and the color could be adjusted.
TFTE (Thin Film Transistor Engine)
TFTE improves the light and speed of display, make the color more light.
ACE (Acceleration Engine)
ACE makes auto scanner operation efficiently, makes data stream accumulate efficiently, and make auto trouble analysis efficiently.
CSE (Communication Stability Engine)
CSE makes systems afford pressure of high electric current, and could judge electric current

Mitsubishi MUT-3 Diagnostic and Programming Tool With TF Card for Cars and Trucks

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 14:11:29 +0800

MUT-III can do gasoline vehicles and also FUSO diesel vehicle, support online update. It can do dignose and also ecu programming. Have memory card and ecu file on CD. Software install easily, can be used on any computer or laptop.

Mitsubishi MUT-3 Diagnostic Tool

Software Version: 2010.12
Supported Languages: English, French, Spainsh, Thai,Vietnamese, Czech, German, Greek, Italian, Turkish, Russian, Chinese
Supported Both Diagnosis and ECU Programmer

MUT-3 Advantage:
1. Never lock machine
2. Free update
3. With CF Card
4. Support gasoline vehicles(car) and Diesel vehicles( trucks, bus),
Operation system: Windows xp
IE requirement: IE 6.0 or 8.0

MUT-3 Description:

A personal computer (PC) is connected to the MUTIII unit and used as a system's control terminal, and communicates with a vehicle ECU through the VCI. In addition to being able to handle all diagnosis functions covered by the conventional MUT-II tester, the MUT-III system can display data as easy-to-understand diagrams and graphs on a large screen of the PC. Unlike the MUT-II, the MUT-III can retain data on all vehicles, from old to new models, classified according to destination in the PC's hard disk. This eliminates the awkward but essential job with the MUT-II, of switching the data list (communications protocol data and diagnosis item list database) by replacing the ROM pack with another according to the vehicle model and year model.

MUT-3 Function:

New functions that make use of the advantages of the PC are also being developed. For example, the workshop manual viewer is a useful function for mechanics as they no longer have to carry around a thick manual and search for relevant pages while working on a vehicle. The workshop manual viewer is currently available for certain vehicle models, and allows users to retrieve the pages containing the failure code for a particular problem at the push of a button.

MUT-3 Set Includes

1 Vehicle Communication Interface (V.C.I.) (MB991824)
A communication interface used to connect the vehicle ECUs and the PC.

1) When connected with the PC
-Vehicle diagnosis (Interactive fault diagnosis)
-SWS communication; CAN communication support
-Drive recorder
-Volt, Ohm, measurement
-Fuel pressure measurement (Not available in US)

2) When used with the V.C.I.unit (disconnected from PC)
-V.C.I. Stand-alone diagnosis
-Drive recorder
-ECU reprogramming
-Volt,Ohm measurement
-Belt Tension measurement

2 Memory Card
Stores data for ECU reprogramming, drive recorder, etc.
This is a standard, off-the-shelf memory card. The one provided (with reprogramming data) is a Compact Flash memory card (MB991853) inserted into the CF card adapter (MB991939).

3 M.U.T.-III Main Harness A (MB991910)
Used when connecting the V.C.I. with vehicles that have only one 16-pin diagnosis connector.
-Supports fault diagnosis and ECU updating on the above-described vehicles
-Supports the CAN communication system

4 M.U.T.-III Main Harness B (MB991911)
Used when connecting V.C.I. with vehicles that have a16-pin + 12-pin or 16-pin + 13-pin diagnosis connector.
For models equipped with only 12-pin (or 12-pin + 12-pin)diagnosis connector, connect the M.U.T.-II adapter harness(MB991498) to the end of this harness in the same as M.U.T.-II, and power is supplied from the cigarette lighter socket.

Multi-Di@g Access J2534 Pass-Thru OBD2 Device V2011

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 04:48:01 +0800

Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications

Latest Multi-Di@g Access J2534 Pass-Thru OBD2 Device

Highlights:
1.This version Multi-diag J2534 Resolved NO VCI FOUND problem!
2. VCI Number: 093479
3. Supported Languages: English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish, Bulgarian, Croatian, Czech, Danish, Dutch

Description:

Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1 specifications.Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.

Characters

Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory

Multi-Diag Access J2534 Interface Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1. Maintenance
Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

2. Air Conditioning
Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators

3. Pollution control
Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

4. Liaison to the ground
Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

5. Body
Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar

6. Post-Equipment
Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system

7. Braking
Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.

8. Motor
Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve

9. Expert Mode
Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.

J2534 interface Package List:

VCI (Vehicle Communication Interface)
DB25 to OBD-2 Male Cable
OBD2 Male to OBD2 Female Cable

TOYOTA TIS CABLE Diagnostic Cable

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:02:38 +0800

TOYOTA TIS CABLE diagnostic cable Support Toyota TIS OEM diagnostic software and most 1996 and newer vehicles with OBDII/DLC3 diagnostics.

TOYOTA TIS CABLE Diagnostic Cable

Supported Language: English/French/German/Italian/Spanish

Toyota Diagnostic Cable Function:

Supports Diagnostics and Active tests
Supports most 1996 and newer vehicles with OBDII/DLC3 diagnostics
Support Toyota TIS OEM diagnostic software
Easy to install and carry
High performance with ARM chip inside
Status LED

Toyota Diagnostic Cable Supported Protocols:

KWP 2000 ISO 14230-4
CAN 2.0B ISO 11898
K-Line ISO 9141
CAN ISO 15765-4

Toyota Diagnostic Cable Specification:

Diagnostic Interface:16 PIN
USB Interface: USB 2.0
Power: DC 5 V - 36 V
Consumption: 0.3 W

Toyota Diagnostic Cable Software Display:

Package List:

1pc x Toyota TIS cable
1pc x CD drive(with user manual in it)

Audi VW VAG K+CAN COMMANDER 3.6

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Fri, 27 Dec 2013 14:40:02 +0800

Audi VW VAG K+CAN COMMANDER 3.6

Odometer Correct CAN Based Cars

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Crossgolf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+

Security Code Reading (CAN) / Read/Write EEPROM Memory

K-line UPDATE - Odometer Correct / Security Code Reading / Read/Write EEPROM

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH (K) up to 2002
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
Sko bia (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Read/Write EEPROM of Engine Control Units

BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.
(extracting security code, odometer correction, enable disable immobilizer and so on)

Porsche 911 (996/997), Porsche Boxster, Porsche Cayman, Porsche Cayenne - Read EEPROM via OBDII

BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8, MED9x - FSI, EDC16x - Read flashmemory by OBDII
(near update programming of flash memories with function for resetting of reflashing counter)

Key learning function (without need of security access code/login)

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Sko bia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)
Key learning Cayenne (CAN)
VAG MMI TV Activation - A6, A8, Q7

Package List:

1pc x VAG K+CAN Commander 3.6 Cable
1pc x CD Drive

Best Quality MB SD Connect Compact 4 Star Diagnosis 2013.07 With WiFi

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Fri, 27 Dec 2013 14:38:24 +0800

Best quality MB SD Connect Compact 4 supports reading & erasing trouble code,reading the real-time data of sensor and actuator, coding and programming. MB SD Connect Compact 4 supports wireless diagnose, support K-line,CAN BUS and UDS protocol, fit all computers,with multi-language.

Best Quality MB SD Connect Compact 4 Star Diagnosis 2013.07 With WiFi

Highlights:

1.Software Version: 2013.07
Hardware Version: 2.02
(If you try to update by yourself, the multiplexer will be locked, then the only way is to send back for repair. and repair fees is 20USD one time)

New MB Compact 4 Feature:

1. New MB SD Connect Compact 4 Star Diagnosis support wireless diagnose;
2. New MB SD Connect Compact 4 Star Diagnosis not only support K line diagnose and CAN BUS,but also UDS diagnose protocol. Because old MB STAR C4 main board do not have UDS chip, so old MB STAR C4 can not support it;
3. Multiplexer now use Lan cable to connect, can fit all computers not only IBM T30;
4. Connector adopt Military quick swap technology, it can support 10,000 times pull plug, more stable;
5. All core accosseries adopt original new packing chip, and 24hours test, guarantee the quality of the products;
6. Support multi-language, such as English, German,French,Italian, Spain, Portugal, Finland, Denmark, Sweden and so on.

Package List:

1pc x Multiplexer
1pc x OBDII 16PIN Cable
1pc x 38PIN Cable
1pc x 14PIN Cable
1pc x 4PIN Cable
1pc x Lan Cable
1pc x HDD(2013.07 version)

Notice:

MB SD C4 only support hardware version 2.02, can not be updated to 2.2, If it is broken by updating, the factory will charge 20USD/pc repairing fee. If the software is not match with upgrade patch also lead to be locked.

The menu of Version 2.02.(showed in the picture)

the menu of Version 2.2. But our device can not support, so don't update to the following version.

Vag Tacho 3.01+ Opel Immo Airbag

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:49:24 +0800

VAGTacho + Opel-IMMO-Airbag Scanner

Features:

Function: Change mileage, Read PIN code.
Update for OPEL IMMO-1 IMMO-2 and AIR-Bag Tool
Last version: 3.01
Latest update: VW Polo, Seat Ibiza Cordoba 2001 - 2005, Fabia 2004 ect.

Specification:

Single click access for VDO Seed-Key dashes.(This means: VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year, some Seat dashes up to 2004 year ect...)
VAG Kombi instrument / Immo box eeprom programmer... via OBD connector
Laptop: please choose Windows XP system.
OPEL Immobilizer diagnostic software
Immo1 & Immo2 supported up to year 2004

Package List:

1pc x VAG Tacho 3.01+ Opel IMMO airbag
1pc x CD Drive

2013 MINI VCI FOR TOYOTA TIS Techstream V8.10.021

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:42:27 +0800

MINI VCI FOR TOYOTA TIS Techstream V8.10.021 support Toyota TIS OEM diagnostic software; high performance with ARM CPU inside; high reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).

2013 MINI VCI FOR TOYOTA TIS Techstream V8.10.021

Specification:

1.Feature

Support Toyota TIS OEM diagnostic software
Cost-effective, the price of product is only one-third of similar foreign products.
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).
Can be updated by E-mail.
Not only provides commonly used J1962 connector, but also provides the old 22pin connector for Toyota.

2.Supported Protocols

K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4

Software Display:

Package List:

1pc x Toyota MINI VCI OBD2 scan interface
1pc x Toyota 22pin connector
1pc x CD Driver
1pc x Carrying Box

Nissan Consult 3 III Software Bluetooth Professional Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:12:27 +0800

Nissan Consult 3 is a professional diagnostic tool for almost all Nissan car models from different regions ,including Japan,North America, Europe.Nissan Consult 3 is equipped with various function including simultaneous self-diagnosis of an entire system or data recorder.

Nissan Consult 3 Professional Diagnostic Tool

Languages: English, Finnish, French, German, Russian, Greek, Italian, Japanese, Spanish, Chinese(Traditional), Chinese(simplified)
Special Function: Now consult 3 can do GTR,but it needs customers have GTR Card.
Nissan Consult 3 VI Registert Password: nissanconsult3
OS Requirement: Windows XP (SP2) or Windows XP (SP3).

Functions:

1.Swift Diagnosis and Swift Repairs Through Automated Operations

The selection of CAN type as well as the identification of malfunction locations are completely automated, allowing CAN diagnosis to be done 17 times faster than previous method where the diagnostics system needed to be supplemented by the service manuals. Repairs involving reprogramming of the in-vehicle computer can be completed 1.5 to 2.5 times faster with the new system.

2.Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.
With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

3.Capable of Handling Multiple Complex Defects

The diagnostics tool is equipped with various functions including simultaneous self-diagnosis of an entire system, simultaneous data monitor for multiple systems, data recorder, and oscilloscope capability.

4.Enhanced Data Management with Improved Laptop PC

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

5.Map Data Update Function for Hard-Disk Navigation System

Through high-speed data update system, it is possible to update map data in approximately 20 minutes with the new CARWINGS navigation system (hard-disk) equipped in the all-new Skyline and other future products.
(1) CONSULT:Computerized On-Board System Universal Tester.
CONSULT introduced in 1989,
CONSULT-II introduced in 1999.
CONSULT-III is 3rd generation model.
(2) Communication distance: radius of 5m approx.

Nissan Consult III FAQ:

Q1: What does this item can do and can not do?
A1:Nissan counsult III has two model.MI and VI,VI is for diagnose and MI is for waveforms test.Our nissan counsult III can realize the function of VI model but can not do MI model.

Q2: Does this item have requirment on laptop?
A2:No.Do not have specific requirment on laptop.

Q3:Does it come with software?
A3: Yes,it come with necessary software.it does not come with laptop in the package.

Q4:Does nissan consult 3 need password when connecting bluetooth?
A4:no ,it doesn't ,please refer to the instruction in software stating how to match the bluetooth.

Nissan Consult-3 Plus V31.11 Nissan Diagnostic and Programming Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 01:52:31 +0800

Nissan Consult-3 Plus

Nissan Consult-3 Plus = Nissan Consult-3 + Nissan Consult-2

Software Version: 31.11
Support Multi-Languages: English, French, German, Spanish, Italian, Japanese, Russian, Finnish, Greek, Chinese(Simplified), Chinese(Traditional)
Communication Mode: USB 2.0 / Bluetooth
OS Requirement: Can only work with Windows XP(SP2 or Later). It cannot work in VISTA system

Nissan Consult -3 Plus Function:

Nissan Consult-3 Plus can support all the models of the Nissan and Infiniti from 1996 up till now, with all Consult II & III functions .

And consult III plus can calcaulate the password for the new cars till year 2012 with NISSAN Password.

1. Nissan Consult-3 plus (nissan consult 3+) work for all nissan car , infiniti car and nissan gtr car to 2012.
2. Nissan Consult-3 plus work with obd-16 connector for the new kind of car, work with 14 pin connector for the old kind of car.
3. Nissan Consult-3 plus support nissan car electrolic system diagnostic and programmer function.
4. Nissan Consult-3 plus support nissan electromobiles such as Leaf.
5. Nissan Consult-3 plus support all Renault.

Nissan Conslu-3 Functions:

1. Scantool Diagnostics:for all Nissan,Infiniti,GTR and Renault;
2. ECU Reprogramming:for all Nissan,Infiniti,GTR and Renault;
3. Immobi and Smart key:for all Nissan,Infiniti,GTR and Renault;
4. Nissan GTR:for Nissan GTR Diagbostics,Immobi and Reprogramming;
5. Electromobiles car:for Nissan Electromobiles car Diagbostics,Immobi and Reprogramming;

Nissan Conslu-3 Packing List:

1pc* Nissan Consult 3 plus vehicle communication module + OBD-16 Cable
1pc* Nissan 14PIN Line
1pc* USB 2.0 Cable
1pc* Bluetooth
1pc* Power Supply
1pc* Casebox

Super VAG K+CAN V4.6

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 13:24:35 +0800

Super VAG K+CAN V4.6 can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic

Super VAG K+CAN
Note:1. Software Version: V4.62.

Supported Languages: English/ Spanish/ Italian/ Portuguese/ Greek

3.Update: It Can Not Be Updated. Please Attention Here. Or You Will Get A Blue Screen AfterUpdating4. UDS protocol added for reading fauty codes and erasing fauty codes

Features:
Support Comprehensive model, support the great majority of VW,Audi,Skoda model.Suport Comprehensive Anti-theft System,such as IMMO1,IMMO2,IMMO3,WFS ,ect.Support K-Lines Can BUS cablesUsed 32-bit processor, the computing power and the compatibility more strongerBig flash volume , support the cpu extend,can be last upgradeHigh screen Resolution,richer informationSupport system checked, can be checked the error onlineMan-machine interface more friendly, more convenient operation, easy to learn and use support system since the Detection, on-line check system failuresInput convenience, use of multi-function digital keyboard, supports digital ShortcutsNice looks and generous, using ergonomic design, feel good, easy to controlShell with durable materials, applicable to the complex working environment
Function:
This product can be used to odometer correction ,read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat,VW ,VW Bora,VW Polo,VW Golf,Audi A6,Audi A8,Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia vehicles
1. CAN Odometer Correction
VW Golf5VW Jetta (MY2006)VW CaddyVW CrossgolfVW TouaranVW EOSVW IndividualVW Passat platform B6 (MY2006)Seat Toledo (CAN)Seat Leon (CAN)Seat AlteaSeat Altea XLSkoda Octavia IISkoda ScoutAudi A3Audi A8Audi A6Audi Q7Audi Allroad 2004+
2. CAN Security Access Code Reading
VW Golf5VW Jetta (MY2006)VW CaddyVW CrossgolfVW TouaranVW EOSVW IndividualVW Passat platform B6 (MY2006)Seat Toledo (CAN)Seat Leon (CAN)Seat AlteaSeat Altea XLSkoda Octavia IISkoda ScoutAudi A3Audi A8 - R/W EEPROMAudi Q7Audi AllroadAudi A6
3. K-line Security Access Code Reading and Odometer Correction
Audi A2 (K)Audi A3 VDO/M73 up to 2003 (K)Audi A4 VDO/M73 (K)Audi A4 BOSCH (K) up to 2002Audi A6 VDO (K)Audi Allroad (K) up to 2004Audi A8 up to Jan 1999Audi TT (K)Seat Alhambra (K)Seat Arosa (K)Seat Cordoba after 1999 (K)Seat Ibiza VDO after 1999 (K) (MY2007 covered)Seat Leon (K)Seat Toledo (K)Skoda Octavia (K)Skoda Superb (K)Skoda Roomster (K) (MY2007 covered)Skoda Fabia (K) (MY2007 covered)VW Bora (K)VW Beetle (K)VW Golf4 VDO/Motometer/BOSCH (K)VW Jetta (K)VW Passat (K)VW Polo VDO/Motometer (K) (MY2007 covered)VW Sharan (K)VW T4/T5 VDO (K) (MY2007 covered)
4. Engine Security Code and Kilometers Reading
Support vehicles :BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.
5. Key Programmer
Audi A2Audi A3 VDO/M73 up to 2003Audi A4 VDO/M73 up to 2000Audi A4 after 2000 - petrol engines >= 1.8Audi A6 VDO (K)Audi A6 (CAN) petrol enginesAudi Allroad (K) up to 2004Audi Allroad (CAN) petrol enginesAudi A8 up to 1998Audi A8 from 2001 to 2002 2.5TDIAudi A8 (CAN) 2003+ - first component protection generationAudi TT (K)Audi Q7 petrol enginesSeat Altea (CAN)Seat Cordoba after 1999 (K)Seat Ibiza (VDO) after 1999 (K)Seat Leon (K+CAN)Seat Toledo (K+CAN)Skoda OctaviaSkoda Octavia II (CAN)Skoda SuperbSkoda RoomsterSkoda Scout (CAN)Skoda FabiaVW Phaeton petrolVW Touareg petrolVW BoraVW BeetleVW Caddy (CAN)VW EOS (CAN)VW Golf4 VDO/MotometerVW Golf5 VDOVW Crossgolf (CAN)VW Individual (CAN)VW Jetta (K+CAN)VW Passat B5 (K) B6(CAN)VW Polo5VW Sharan after year 2000VW T5VW Touaran VDO (CAN)Porsche Cayenne (K)
6. TV Activation
VAG MMI TV Activation - A6, A8, Q7
7. Airbag Resetting
1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0909 605 B, 3B0 959 655 B,1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C,8L0 959 655 F8A0 959 655 C,8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L
8. Diagnostic

TOYOTA K+CAN 2.0 Commander 2.0

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 10:10:27 +0800

TOYOTA K+CAN commander 2.0 is connecting with all electronic control modules in the vehicle, work by K and CAN bus diagnostic connection. Toyota k+can commander 2.0 for all electronic control units read and clear error (DTCs) memories - standart, history memory,actuator test and current data.

TOYOTA K+CAN 2.0 commander 2.0

Description:

For all electronic control units read and clear error (DTCs) memories - standard, history memory.
Actuator test Current data.

Function:

connect with some control module.
select vehilcle model and scan modules.
choose some special function - Immo reset and key programming.

Specification:

Key programming - normal and smart key for vehicles

Toyota Rav4
Toyota Yaris (smart key)
Toyota Auris (smart key)
Toyota Land Cruiser 100
Toyota Land Cruiser 120
Toyota Prado
Toyota 4 Runner
Toyota Camry (2004+)
Toyota Corolla (2007+)
Toyota Prado
Toyota Hilux
Toyota Prius
Toyota Avalon
Lexus LX470
Lexus LX570
Lexus RX300
Lexus RX330
Lexus RX350
Lexus RX400
Lexus RX400h
Lexus SC430
Lexus GS300
Lexus GS430
Lexus GS450
Lexus ES350
Lexus IS220
Lexus IS250
Lexus IS350
Lexus LS430
Lexus LS460
Scion

Package List:

1 k+can main unit
1CD

Mangoose Toyota Diagnostics and Reprogramming Interface With Completely New Chip

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 10:07:00 +0800

The DrewTech Mangoose is a low-cost, high-performance vehicle network interface that connects a laptop directly to the OBD-II connector.

Mangoose Toyota Diagnostics and Reprogramming Interface

This Cable Can not Do ECM Programming

Description

DrewTech designed this product to be affordable for CarPCs, the aftermarket, and automotive enthusiasts. The Mangoose includes a J2534 driver and delivers full-speed (12mps) USB 2.0 performance.

Specification

1. Mangoose Features

1)Lost cost, high performance pass-thru diagnostic tool for use with PC
2)Simple packaging with electronics contained inside the cable
3)J2534 and J2534-1 compliant device driver
4)Commercial Range (0 to +70� C)
5)Cable length: 6 feet
6)Operating Voltage: Bus-powered by USB
7)Mongoose VPW supports GM TIS, SPS, TIS2WEB, and DPS flash reprogramming software

2. Bus Protocols

Mangoose VPW	CAN/ISO 15765/GMLAN GM Class2 (J1850VPW)
Mangoose PWM	CAN/(ISO 15765 J1850PWM
Mangoose ISO	CAN/ISO 15765 KWP2000 (ISO9141 / ISO14230)

3. Software Options

The DrewTech Mongoose is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mangoose uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications. Different diagnostics and data logging applications supported are currently supported by the Mongoose, with more being added all of the time.

4. PCMScan Diagnostics and Data Logging Software

This full version of PCMScan allows viewing, charting, data logging, and playback of diagnostic data in real time. Realistic looking gauges can be moved, resized, and laid out to resemble your own dashboard. Display English or Metric units. Read stored Diagnostic Trouble Codes (DTCs), clear the check engine light, and test emissions related systems.

PCMScan running on Mongoose ISO(M-ISOCAN) or Mongoose VPW(M-VPWCAN) supports all ISO141 import vehicles and all CAN vehicles including all GM vehicles and many Ford, BMW, Honda, Toyota, Chrysler, Mitsubishi, Nissan, Volvo, Volkswagen, and many other automaker brands. By 2008 all vehicles on the road will be CAN based
and supported by the Mongoose ISO/CAN adapter

and supported by the Mongoose ISO/CAN adapter

6.API

Drew Technologies also provides an application programmer interface (DLL) for OEMs, integrators, or end-users to develop their own PassThru (SAE J2534) applications. Create your own applications in LabVIEW(tm), C or Visual Basic.

Package List:

1.Mongoose vehicle interface
2.Installation CD with device driver (J2534 compatible)

New Toyota Intelligent Tester2 IT2 2013.12V With Suzuki

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 09:20:01 +0800

Diagnostic Tester-2 for TOYOTA and SUZUKI.It works for most type of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function.

TOYOTA Intelligent Tester2 IT2 With Suzuki

Software Version: 2013.12 Software For Toyota Software For Suzuki
Supported Languages: English, French, German, Italian, Spanish, Chinese
Notice: This Toyota IT2 Can only Do North America Area Suzuki. If you want professional suzuki diagnostic tool, Please Choose GM TECH2+ Suzuki 32MB Card.

Toyota IT2 Functions:
All type of Toyota(made after 2000) and Lexus included read code, clear code , data flow, action testing and guard against theft initialization function. And it also supports OBD-II.

1. Main Function:
Read wrong code
Clean wrong code
Reade data stream
Draw data stream curved shape
Setting system
Control unit programming
Self test function
Record and review function

2. Test System
Engine
Automatic transmission
ABS
Controlled traction differential
Stability control
Airbag security
Central doorlock
Meter cruise suspension air-conditioning
Electronical control turning system

3.Vehicle Oscillograph
SMT and execute component
Dual mono oscillograhp
Setting time base & electrical level automatically
Storage & playback

4. Digital Multimeter
Electrical system test
Voltage frequency duty cycle

Toyota IT2 Specification:

1. Character:
1) Touchscreen & back lighting control
2) Easy & quick

2. After Service:
1) Guarantee: one year, from the date equipment arrival
2) Upgrade free for one year
3) Upgrade method: Email

SUZUKI SDT Examples for Testing the Vehicle

SUZUKI SDT is the SUZUK company professional diagnostic tool for the Suzuki car. It have diagnostic function,oscillograph function, multimeter function.
It the a very usefull machine to help you repair the SUZUKI car.

1. Equipment Online
1) turn on the equipment power
2.) to be connected with OBD diagnostic cable

2. Star the Equipment
Turn on the power,entering into the interface then click the "automation"button

Toyota ITS2 Names of the Parts:

The names of the Intelligent Tester II parts are as follows.

Package List:

1. Mainframe -- 1pc
2. OBD-II -- 1pc
3. Charging line -- 1pc
4. Lin line -- 1pc
5. Measuring leads for multimeter 1 -- 1pc
6. Measuring leads for multimeter 2 -- 1pc
7. Card -- 3pcs(2013.12 Toyota, 2013.12 Suzuki and Blank card for backup)

Opcom 2009 V Can OBD2 Opel

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 09:17:53 +0800

OPCOM 2009 diagnostic tool is mainly for Opel Cars. It covers almost all opel cars, even new cars with Can-Bus based based diagnostic, such as Vectra-C, Astra-H,Zafira-B.It is PC based diagnostic program.

Opcom OP-Com 2009 V Can OBD2 Opel

Software Version: 2009
Attention: Recently we notice some customer use 2010 version software on this product damaged the interface. We want inform customer please do not try update this interface online or use 2010 version software.if damaged,need send back for repair. we will update our version once we get newer one.thank you.

Opcom 2009V Function:

1.The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
2.The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
3.Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
4.Fault codes will be shown with all available information:

Opcom 2009V Full fault code text description

1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You Can Also Run Output Tests on Many Controllers.

PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps

Package List:

1.OP COM Interface
2.USB Cable
3.Software and Drivers CD

FAQ:

Q: Does this product has any other language other than English?
A: This product have English and germany version.
Q:What we can do with this device?
A:1. You will get a feedback on the state of the activated output. This will helps you to find the failed. Components more easily. With OP-COM, you can learn keys to immobiliser, and remote keys to the central door locking.
2. You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.
3. You will need the vehicle security code, which can be found on the CAR-PASS.
4. You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva
5. You can code SAB6, and SAB8 airbags with the software.
6. The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.
7. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.
8. Compared to the TECH2, which is the dealers tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.

Opcom 2009 V Can OBD2 Opel

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 09:17:53 +0800

VAS 5054A ODIS V2.0 Bluetooth VW Audi Skoda Seat Vag Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 03:52:08 +0800

VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers,mainly do AUDI VW Seat.It is bluetooth version.

VAS 5054A ODIS V2.0 Bluetooth VW Audi Skoda Seat Vag Diagnostic Tool

New Highlights:

1. Software Version: ODIS V2.0
21. Multi-Languages: English/ Japanese/ Portuguese/ Romanian/ Korean/ Dutch/ Polish/ Turkish/ Spanish/ French/ Italian/ Croatian/ Danish/ German/ Swedish/ Finnish/ Slovenian/ Czech/ Russian/ Greek/ Chinese (You Can choose any language you need freely)

3. Supported Car Models: VW, AUDI, SKODA, SEAT

4. Bluetooth Version

5. VAS 5054A hardware support Online Coding, but our software do not support online coding, need use VW dealer's software.

6. If you want CD of Bently and Lamborghini, please leave message when you place the order on our website

ODIS System Core Advantage --- Realizing higher quality and lower cost on repair through high-efficiency diagnosis process!

The GFF database guided by centralized management posts fault information and solution directly.
A full range of integration from developing to after sale service makes procedure basis reliable.
The integration of diagnostic system (eg : Elsa pro) further enhances the core processes of service.
Systematically optimizes technician’s diagnostic procedure and saves their time cost.
The optimization of diagnostic procedure makes the distributor’s cost reasonable.

VAS 5054A ODIS V2.0 Computer Windows System Requirements:

Windows System Language: American English
Windows XP(xp2/xp3)
System C:// have to be NTFS format
C:// need to have at least 10GB space for installing VAS5054A

VAS 5054A Description:

The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.
The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.
No cables are needed for vehicle diagnostics using the VAS 5054A.
The range of the wireless Bluetooth connection is 2 to 5 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.
The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.

VAS 5054A Specification:

The vehicle protocols are handled directly in the VAS 5054A.
This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.
The diagnostic application and the associated Diagnostic Base System are installed on the application PC.
The diagnostic base system can access the VAS 5054A via Bluetooth or USB.

Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.

Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

The Following Vehicle Bus Systems are Supported:

K line (ISO9141-2)
High-speed CAN (ISO 11898-2)
Low-speed CAN (ISO 11898-3)
J1850 (SAE J1850)

Package List:

1pc x VAS 5054A Main unit

1pc x USB Cable

1pc x USB Bluetooth Adapter

2pcs x CD Software

1pc x Carry Case

IBM T30 Fit MB STAR C3 GT1 OPS

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 02:14:38 +0800

IBM T30 Special Fit for MB STAR C3 GT1 OPS

Memory: 512MB
CPU: 1.6GHZ
Screen: 14inches

It has no HDD in this package, please be attention.

Super VAG K+CAN Plus 2.0 With Powerful Functions

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 24 Dec 2013 09:35:15 +0800

This product can be used to odometer correction, read Security Access Code, key programmer, airbag reset tool, TV Activation and diagnostic for VW Passat, VW ,VW Bora, VW Polo, VW Golf, Audi A6, Audi A8, Audi A4, Skoda Superb, Skoda Octavia, Skoda Fabia cars

Super VAG K+CAN Plus 2.0

Newly Software Update! Update to V1.1.2, Firmware 6.1.8
Supported Languages: English,Spanish

Newly Added Function:

1. Added Audi A4 RB4, RB8 read pin
2. Fixed Audi A4 RB4, RB8 change km bug
3. Added EDC16u1, EDC16U31, EDC16U34 change km
4. Added EDC16u1, EDC16u31, EDC16U34 close immo, open immo functcion
5. Added VW dash NEC24C32 change km 2008-
6. Added VW dash NEC24C64 change km 2009-

Features

1. Support Comprehensive model, support the great majority of VW, Audi, and Skoda model.
2. Support Comprehensive Anti-theft System, such as IMMO1, IMMO2, IMMO3, WFS, etc.
3. Support K-Lines, Can BUS, and UDS protocols
4. Use 32-bit processor, with better computing ability and compatibility
5. With big flash volume, support CPU extend, can be upgraded
6. High screen Resolution
7. Support system checking, can check the error online
8. Upgrade easy and fast, support online upgrade via Internet
9. Support multiple languages, such as Chinese, English, Spanish language, Italian, etc.
10. Easy input data, use of multi-function digital keyboard, supports digital Shortcuts
11. Nice looking and generous, using ergonomic design, feel good, easy to control
12. Shell with durable materials, applicable to the complex working environment

What are added to the PLUS 2.0 compare with the old SuperVAG K+CAN?

1. Odometer corrections for VW Golf with MICRONAS CDC3272 or CDC3217/97 NEW
2. Odometer corrections for VW Jetta, Bora with MICRONAS CDC3272 or CDC3217/97 NEW
3. Odometer corrections for VW Caddy with MICRONAS CDC3272 or CDC3217/97 NEW
4. Odometer corrections for VW Touaran with MICRONAS CDC3272 or CDC3217/97 NEW
5. Odometer corrections for VW EOS with MICRONAS CDC3272 or CDC3217/97 NEW
6. Odometer corrections for VW Tiguan with MICRONAS CDC3272 or CDC3217/97 NEW
7. Odometer corrections for VW Passat platform B6 with MICRONAS CDC3272 or CDC3217/97 NEW
8. Odometer corrections for Skoda Octavia II with MICRONAS CDC3272 or CDC3217/97 NEW
9. Odometer corrections for Audi A4 2008-2010 new
10. Odometer corrections for Audi A5 2008-2010 new
11. Odometer corrections for Audi q5 2008-2010 new
12. CAN security access code reading for VW Golf with MICRONAS CDC3272 or CDC3217/97 NEW
13. CAN security access code reading for VW Jetta with MICRONAS CDC3272 or CDC3217/97 NEW
14. CAN security access code reading for VW Caddy with MICRONAS CDC3272 or CDC3217/97 NEW
15. CAN security access code reading for VW Touaran with MICRONAS CDC3272 or CDC3217/97 NEW
16. CAN security access code reading for VW EOS with MICRONAS CDC3272 or CDC3217/97 NEW
17. CAN security access code reading for VW Tiguan with MICRONAS CDC3272 or CDC3217/97 NEW
18. K-Line Security Access Code Reading and Odometer Correction for Audi A4 BOSCH RBX(K) up to 2008

Odometer Correction for CAN-BUS Cars

VW Golf with MICRONAS CDC3272 or CDC3217/97 NEW
VW Jetta, Bora with MICRONAS CDC3272 or CDC3217/97 NEW
VW Caddy with MICRONAS CDC3272 or CDC3217/97 NEW
VW Crossgolf
VW Touaran with MICRONAS CDC3272 or CDC3217/97 NEW
VW EOS with MICRONAS CDC3272 or CDC3217/97 NEW
VW Tiguan with MICRONAS CDC3272 or CDC3217/97 NEW
VW Individual
VW Passat platform B6 with MICRONAS CDC3272 or CDC3217/97 NEW
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II with MICRONAS CDC3272 or CDC3217/97 NEW
Skoda Scout
Audi A3
Audi A8
Audi A6
Audi Q7
Audi Allroad 2004+
Audi A4 2008-2010 new
Audi A5 2008-2010 new
Audi q5 2008-2010 new

CAN Security Access Code Reading

VW Golf with MICRONAS CDC3272 or CDC3217/97 NEW
VW Jetta with MICRONAS CDC3272 or CDC3217/97 NEW
VW Caddy with MICRONAS CDC3272 or CDC3217/97 NEW
VW Crossgolf
VW Touaran with MICRONAS CDC3272 or CDC3217/97 NEW
VW EOS with MICRONAS CDC3272 or CDC3217/97 NEW
VW Individual
VW Tiguan with MICRONAS CDC3272 or CDC3217/97 NEW
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Audi A3
Audi A8 - R/W EEPROM
Audi Q7
Audi Allroad
Audi A6

K-Line Security Access Code Reading and Odometer Correction

Audi A2 (K)
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH RBX(K) up to 2008
Audi A6 VDO (K)
Audi Allroad (K) up to 2004
Audi A8 up to Jan 1999
Audi TT (K)
Seat Alhambra (K)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K) (MY2007 covered)
Seat Leon (K)
Seat Toledo (K)
Skoda Octavia (K)
Skoda Superb (K)
Skoda Roomster (K) (MY2007 covered)
VW Bora (K)
VW Beetle (K)
VW Golf4 VDO/Motometer/BOSCH (K)
VW Jetta (K)
VW Passat (K)
VW Polo VDO/Motometer (K) (MY2007 covered)
VW Sharan (K)
VW T4/T5 VDO (K) (MY2007 covered)

Engine Security Code and Kilometer Reading

Support vehicles: BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.

Key Programmer

Audi A2
Audi A3 VDO/M73 up to 2003
Audi A4 VDO/M73 up to 2000
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 1998
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ - first component protection generation
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Phaeton petrol
VW Touareg petrol
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer
VW Golf5 VDO
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Touaran VDO (CAN)
Porsche Cayenne (K)

TV Activation

VAG MMI TV Activation - A6, A8, Q7

Airbag Resetting

1C0 909 605 C, 8L0 959 655 A, 1J0 909 609, 6Q0 909 605 C,6Q0 909 605 A, 6Q0
909 605 B, 3B0 959 655 B,1C0 909 605 F, 1C0 909 605 H, 1J0 909 607, 1J0 909
603, 4B0 959 655 C, 4B0 959 655 J, 4D0 959 655 C,8L0 959 655 F8A0 959 655 C,
8A0 959 655 K, 8A0 959 655 K, 4D0 959 655 H, 8D0 959 655 C, 8D0 959 655 L

Diagnostic

Support all of VW, Audi, Seat, and Skoda vehicles.

Package List:

1pc x SUPER VAG PLUS 2.0 Main Unit
1pc x Audi 2x2 Adapter
1pc x OBD2 Cable
1pc x USB Cable

Multi-Di@g Access J2534 Pass-Thru OBD2 Device

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 19 Dec 2013 14:33:15 +0800

Multi-Di@g Access J2534 Pass-Thru OBD2 Device

New Design Multi-Diag J2534 2013V has better functions too, if you want it , please check on our website

Description:

Multi-Di@g Access J2534 Pass-Thru Device is a VCI (vehicle communication Interface) enabling you to communicate with the ECU's according to the J2534 & J2534-1specifications. Beside ECU reprogramming, with the help of Multi-Di@g Office software vehicle diagnostic, maintenance and repair operations can be done in just a few clicks without being an electronic expert. More than 45 brands, a lot of new vehicles, a large deepness in diagnostic functions.

Functions:

After selecting the car manufacturer, then you can make the diagnosis for the different menus on offer (depending on cars models):

1.Maintenance

Diagnosis codes from all computers
Reset maintenance interval
Modification of the sewage
Read / erase fault calculators
Maintenance of the particulate filter

2.Air Conditioning

Diagnosis of cooling electronic
Reading settings cooling circuit,
Test servo actuators

3.Pollution control

Diagnosis of the particulate filter
Electronic control of pollutant emissions
Control of the Lambda probe

4.Liaison to the ground

Electronic configuration of the size of tires,
Electronic configuration of tires (winter / summer),
Setting valves tire pressure
Diagnosis and management of shock-driven
Calibration of the sensor angle Driving (initialization of the steering angle)

5.Body

Implementation of safety airbags (lock / unlock)
Reconfiguration of a new calculator Airbag,
Diagnosis of calculators Airbag,
Rain sensor windshield (reading and erasing fault)
Test panel and activators of lights,
Setting Xenon headlights,
Rear radar

6.Post-Equipment

Setting up the radio,
Configuration loader CD,
Setting alarms
Configuration of the coupler,
Configuration bicycle loading system

7.Braking

Diagnosis of calculators ABS, ESP.
Diagnosis and unlock electric brakes.
Flush the brake system.

8.Motor

Diagnosis of any calculator injection engine (diesel, gasoline, flexfuel, etc. ..)
Programming of injectors
Electronic configuration of the EGR valve

9.Expert Mode

Diagnosis of advanced computers,
Configuration of comfort functions,
Change the language of the instrument panel,
physical measures (option with a probe - not supplied)
Direct access to all functions of diagnosis.

Specification:

1. Supported Language
Bulgarian, Croatian, Czech, Danish, Dutch, English, Finnish, French, German, Hebrew, Hungarian, Italish, Polish, Portuguese, Romanian, Russian, Serbian, Slovenian, Spanish, Swedish, Turkish.

2.Characters
Compliant to SAE J2534 & J2534-1
Either RS 232 or USB interfaces to PC
K-Line ISO 9141 (100 mA)
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4
SCI SAE J2610
Programmable power supply
On-board memory

Please pay attention Multi-Diag Access J2534 Pass-Thru OBD2 Device is not good at programming function.And it is not good at Japan cars.

Software Display:

Contact Information:

Live Support: Chat with us online

Email: obd-scanner.com@gmail.com

MSN: kobd-scanner.com@hotmail.com

Skype: obd-scanner.com

Cummins Inline 5 Insite 7.62

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 19 Dec 2013 09:07:46 +0800

Cummins Inline 5 Insite 7.62 is a PC-based software application that provides quick and easy access to your engine's electronic performance information, it helps to ensure accurate procedures and diagnosis and limit downtime, while increasing productivity and profits.

Cummins Inline 5 Insite 7.62

Note:
1. The 7.62 Software only can fit Win 7 Operating System,can not fit Win XP!!!
2. Supported Languages: English, French, Spanish, Portuguese, German, Italian, Danish, Russian, Hungarian, Indonesian, Turkish, Norwegian, Japanese, Korean, Polish, Swedish, Romanian, Finnish, Dutch, Chinese

Description:
Cummins INSITE 7.62 software supplies engine information quickly, getting the inside details you need. No matter what kind of equipment you run, INSITE is the one support product to have in your virtual tool box to fit every Cummins electronic engine.

Function:

1.Trip and vehicle information
2.Parameter and feature adjustment
3.Accurate problem diagnosis
4.Complete wiring diagram sand sensor location maps
5.Step-by-step trouble-shooting information
6.Fault tree information
7.Fault code and symptom-based diagnostics
8.Engine diagnostic tests
9.Tools to create templates for a group of vehicles
10.Fleet management/driver reward programs
11.Audit trail information
12.Enhanced ECM security

Cummins INSITE 6 is offered in four functional levels: Basic, LITE, RSGR and Pro, ranging from a read only access level to full-function access and capability for the service professional. TOP Authority for FREE

Specification:

1.Supports SAE J1708/J1587 and J1939/CAN data links
2.Supports USB full speed port at up to 2M baud rate
3.Supports RS-232 PC/PDA serial port at up to 115.2k baud rate
4.Is fully compliant with TMC's RP1210 standard
5.Small enough to fit in pocket
6.Aluminum housing provides ruggedness
7.Derives 8 V to 50 V DC power from vehicle
8.Includes advanced processor for maximum speed and performance
9.Internal Flash memory allows firmware upgradeability
10.Includes 5 LED to indicate power and USB, RS-232, J1708/J1587, and J1939/CAN communications
11.Rated for -40� to +85� C operating temperature
12.INLINE 5 meets Cummins in-cab environmental test requirements

Package List:

1. INLINE 5 data link adapter
2. USB 2 meter cable
3. DB25F/9-pin data link cable
4. DB25F/6-pin data link cable
5. OBDII 16pin cable
6. INLINE 5 software CD
7. Carry Case

AUDI A3 A4 A6 VDO LCD Volkswagen Display

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 06:47:48 +0800

AUDI A3/A4/A6 VDO LCD is adaptable LCD display for Audi A3 VDO, Audi A6 VDO, AUDI A4 VDO, Volkswagen Golf, Volkswagen Passat VDO, Seat VDO.The Display is made by: LCD Display 88x64 pixel.

AUDI A3/A4/A6 VDO LCD

Adaptable LCD display for Audi A3 VDO, AUDI A4 VDO, Audi A6 VDO, Volkswagen Golf, Volkswagen Passat VDO, Seat VDO.The Display is made by: LCD Display 88x64 pixel; Flat; Driver ( code D1560TOB ).The display must be connected to the circuit with soldering paste, and the driver SED1560TOB must be connected to the mother board, too.

Package List:

1pc x AUDI A3/A4/A6 VDO LCD

Dell D630 Core2 Duo 1,8GHz, WIFI, DVDRW Second Hand Laptop

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 06:52:58 +0800

Dell D630 Core2 Duo 1,8GHz, WIFI, DVDRW Second Hand Laptop

Specification:

Condition: Used
This item has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended.
Brand: Dell
Type: Laptop/Notebook
Screen Size: 14.0
Memory (RAM): 2000 Processor Type: Intel Core 2 Duo
Primary Drive: DVD+/-RW Processor Speed: 1.80 GHz
Processor Configuration: Dual Core

It is used for those customer who use MB STAR C3, or Porsche KTS520. Do not contain HDD in laptop, you need buy HDD by yourself( because our HDD are all chinese version). Or if you used it for BENZ STAR C3, you can directly put C3 HDD in it.

Package List:

1 set x DELL D630 laptop

REARVIEW MIRROR WITH 4.3" TFT AND CAMERA

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 06:55:46 +0800

REARVIEW MIRROR WITH 4.3" TFT AND CAMERA

Feature:

Super thin mirror
Curved mirror with wide angle rearview
Built-in 4.3" TFT monitor, rearview with camera,auto start working while car backward
Parking sensor system(RD078) is available
Video in connector for any video source
Easy installation, the mirror simply clips over the top of your existing mirror

1. Mirror Color Box Size : 32x20.5x6.2 cm N.W.: 0.8 KG
2. Carton Box ( 10 sets ) : 42x34.2x44 cm G.W.: 9 KG
3. Parking Sensor Color Box Size : 26x20x6 cm N.W.: 0.85 KG
4. Carton Box ( 20 sets ) : 62x42x28 cm G.W.: 18 KG( for 4 sensors)

Package list:

1pc*REARVIEW MIRROR WITH 4.3" TFT AND CAMERA

Wide 150 Degree HD 720P IR Night Vision Car Dash Cam Video Camera Recorder DVR

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 07:00:10 +0800

Wide 150 Degree HD 720P IR Night Vision Car Dash Cam Video Camera Recorder DVR Features:
- Car Digital Video Recorder with 5.0 Mega Pixel Lens, Vehicle Mini DV
- Built-in 5000,000 pixels high resolution camera
- 270 degree rotate swivel lens,130 degrees wide-angle lens
- support TF card up to 32G (not included)
- HD VGA switching
- Night vision
- 2 inches display
- Built-in 1800mah lithium battery, record video continuous for 4 hours.
- Built-in microphone
- Auto start and record after the vehicle is started
- Start recording automatically when turn on the recorder
- Video recording function
- Digital camera function
- Video playing function
- Recording frame rate: 30 fps
- AVI video format
- Supports real time playback
- Recording mode: automatic records when car power is on
- Built-in microphone
- Cycling records automatically, over-write if memory is full
- USB port: connect to computer for upgrade and backup
- Car cigarette lighter power supply, easy installation
- After car power is off, Li-ion battery will provide 10 seconds power to prevent video files loosing
- Control buttons: Record, Menu, Play, Reset
- Power Supplied by Car Charger

9-inch Android System Car Multimedia Tablet PC

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 07:03:45 +0800

9-inch Android System Car Multimedia Tablet PC

Random Accessories

1.Device host

2.Cigarette lighter power supply line

3.User manual

4.Installation fix parts

5.AV input connect cable(option)

6.Household power(option)

7.HDMI Data wire(option)

Machine Specifications

1.System: Android 2.3.5

2.processor:

Telechip Tcc8803 high-performance ARM11 processor ,main frequency 1GHZ support hardware 2D/3D graphics acceleration

3.memory :512M DDR2 high speed cache

4.storage: Built-in 1GB flash

5.Backup external SD card,maximum capacity is 32GB

6.wiress: IEEE802.11b/g wireless network

7.USB:USB2.0 OTG high speed connect port and USB1.1

8.Video output: HDMI video output connect port

9.Audio :3.5mm headphone jack

10.High-quality stereo loud speaker

11.Headphone maximum output power: 40mW

12.Range of frequency response: 20Hz-20KHz

13.SNR: 90db more

14.Screen Size: 9 inch

15. Resolution: WVGA800*480

16. Colour : 1600 million colours

17.Operating Resistive single touch screen

18. Other

Size 250*203*26mm

Coulour Black/grey/beige

Weight 1.86kg

Battery DC12V/3A

19.Annex Power supply line : AV input connect line（option）

20.Installation fix parts : HDMI data line（option）

21.User manual : Household power(option)

Main Features:

1.WIFI wireless Internet 3G dial-up Internet Cable Internet ADSL

2.HDMI HD TV Output

3.Support RMVB / RM / AVI and other common movie format, can play 1080P HD movies

4.office office software: word / Excel / ppt / pdf / txt

5. realistic e-book function, a book flip effect

6.Flash Web plug-in, potatoes Youku video online watch

7. built-in dual speakers

8.support for multiple languages

You will often use the following functions:

1.Surfing the Internet: on the WWW (computer version) WAP (mobile) web browser news, onlookers celebrity microblogging.

2 movies: RMVB / RM / of AIV full-format HD player. The can QQLIVE / Youku / potatoes, watch movies online.

3 Online website: http://live.qq.com like to nest ranking comrades HMDI HD output to large LCD screen, the family is the movie theater.

4.Book: realistic 3D open book effects, Import TXT files directly generate in book form but also to online reading.

5 chat to steal food: QQ / Want / Fetion / MSN, and how you love to chat on how talk. The diary can also sign space, stealing food, you can install the pinyin / stroke input method, can not type also can be handwritten, but afraid you can not write.

6.Investors Gospel: support for a variety of stock software, can be viewed in real time the market.

7.Mobile office: office office software, word / excel / ppt / pdf full support of the white-collar family of workaholics walking time can be office.

8. games: massive game software, educational / speed everything. Recently popular, such as anger bird / plant vs.

9.Zombies / finding fault Tourism / Fast Speed / Pearl of the Three Kingdoms ...

Autel PowerScan PS100 Electrical System Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 21 Dec 2013 07:12:09 +0800

Autel PowerScan PS100 Electrical System Diagnostic Tool

PowerScan PS100 Features:

Performs every type of service including power injection, measurement, ground testing, polarity checks, continuity testing and components activation

Easy to read AVOmeter allows you to read voltage, current and resistance at the fingertip

With a flip of the power switch, you have an instant hot/ground lead for powering up electrical components like cooling fans, relays, etc.

Simultaneously uses the hot lead and the ground lead to activate components right in your hand

Instantly identifies positive, negative and open circuits

Tests for bad ground contacts instantly, allowing you to follow and locate shorts fast without wasting fuses

Instantly checks continuity of switches, relays and diodes

Circuit breaker protected

Built-in Flashlight enables you to work in the dark

Audio tone indicator allows for no-look menu scrolling once users are familiar with menu tone assignment

20ft (extendable) cable provides excellent accessibility to test along the vehicle

Extremely easy to use and highly reliable

Autel PowerScan PS100 Specifications:

Display: TFT color display (160 x 128 dpi)

Operating Temperature: 0 to 60�C (32 to 140�F)

External Power: 12.0 or 24.0 V power provided via vehicle battery

Autel PowerScan PS100 Package List:

1 × PowerScan PS100

1 × Rugged blow molded case

1 × 20ft. extension cable
1 × Probe tip

1 × Battery hookup clips

1 × Cigarette lighter adapter

1 × User Manual

VAG CAN Commander 5.1 For VW AUDI Group

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Tue, 24 Dec 2013 13:24:53 +0800

Compatible with certain models of VW, Audi, Seat, and Skoda
Operating Software Compatibility: Windows 98SE, ME, 2000, XP
No need for additional batteries, cables, connectors, or converters

VAG CAN Commander 5.1

VAG CAN 5.1 Description:

Compatible with certain models of VW, Audi, Seat, and Skoda
Connect your computer to your car
USB to OBDII - CANBUS connection
Displays live data from your vehicle
Displays diagnostic trouble codes (DTCs) and definitions on screen
Reads and clears all generic DTCs and some manufacturer specific DTCs
Read security access code of immobilizer, eeprom and flash memory of instrument cluster
Plug and play: No need for additional batteries, cables, connectors, or converters

VAG CAN Commander 5.1 Support Vehicles:

2003+ VW Touran (1T chassis)
2004+ VW Golf (1K chassis)
2004+ VW Caddy (2K chassis)
2004+ Audi A3 (8P chassis)
2004+ Seat Altea (5P chassis) and Altea XL
2004+ Skoda Octavia (1Z chassis)
2005+ Seat Toledo (5P chassis)
2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)
2005+ Seat Leon (1P chassis)
2005+ Jetta (1K chassis)
2006+ Eos (1F chassis)
2003+ Audi A8 and A8L (D3 platform, 4E chassis)
2005+ Audi A6 (C6 platform, 4F chassis)
2005+ Audi A4 (B7 platform) (some control modules)
2005+ VW Passat (B6 Platform, 3C chassis)
2006+ Audi Q7 (4L chassis)
2007+ Audi R8 (42 chassis)
2007+ Audi TT (8J chassis)
2005+ Porsche Cayenne
Skoda: Roomster, Scout

VAG CAN Commander 5.1 Specification:

1.Operating Software Compatibility: Windows 98SE, ME, 2000, XP
2.OBDII Plug: 16-pin (Male)
3.USB: 2.0 and backward compatible

VAG CAN Commander 5.1 Package list:

USB VAG Diagnostic Cable C 5.1 OBDII
CD with software

V2013.09 Benz Star C3 Super Mb Star Updated by Internet

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 06:25:38 +0800

Super MB STAR is one of the best after-market tools for Bens diagnostic, coding/programming in the world, it is also an up-to-date tool for online upgrade directly, work with any laptops, compatible with Windows7/XP/VISTA/2000/Mac/Linux operation system, software including Xentry for new released C204/ C205/ CLA117/ GLC156/ E207/ E212, ect., which are able to work with Benz cars, trucks, Sprinters, Vans, Smart, Cobus, FUSO, BHARATBENZ, FOTON, etc.

V2013.09 Benz Star C3 Super Mb Star Updated by Internet

Highlights & Notice:

1. Software Version: 2013.09
2. Supported Languages: English/ German/ French/ Italian/ Korean/ Spanish/ Portuguese/ Finnish/ Danish/ Japanese/ Swedish/ Turkish/ Polish/ Hungarian/ Czech/ Dutch/ Chinese,etc

3. Update: On Super MB Star Official Website http://www.supermbstar.com/ One Year For Free

After one year charges 300USD/year for updating or 50usd/time. After you get charged, please update within 24 hours, or it may be invalid .

4. Hardware And Software Requirements:

Hardware requires at least Intel Celeron/Pentium 2.0GHz, 2G RAM, USB 2.0 recommended and Microsoft Windows 2000/XP/Vista/7 latest service pack installed.

5. If you buy the software for all computers, please use it on the computer with COM Port, it is more stable than the connection by PCMCIA Card.

6. Now Buy Super MB STAR or Hard disk of Super MB STAR, we provide you one time free Super MB STAR Xentry Special Function Key Calculate Service.Now we provide Xentry Special Function Key calculate service for Super MB STAR Top Version customers only. One Serial number only able to enjoy this service once, please provide the following information for our faster service:

Description:

The new Super MB STAR Net 09-2013 released Internal HDD software fit for:Lenovo Series (X61T, X60, T60, T61, T400, E420, E430, etc.) HP Series, Dell Series (D630, D620, E6420, E6430, etc.) Toshiba Series, Fujin Series.

New features of Super MB Star 09/2013:

Password Letter verification of your Super MB STAR Online

No need to active EPC/WIS any more, double click the icon then use it

New cars of C-Class 205, CLA117, GLC156, B 246, CLS 218, SLK172, BHARATBENZ, CLC 171, etc., are released in this version

Online SCN Coding/offline SCN Coding/offline coding are all available with this new version

New function WIS and EPC DATACARD is added

The car PL67 (01-2013 Version) is added to Benz price list

Online updater client platform STAR Updater V3.0.0.1 for users’ easier upgrade.

Support the hardware quick self-test and the software to be quickly recovery

FDOK Key Calculator (Optional)

Adjust truck Speed Limitation function (Top version only)

SBC Reset function (Top version only)

SBC Special function Password Removed (Top version only)

A/C, SRS Special function Password Removed (Top version only)

TV Activation function (Top version only)

Clean ASSYST plus Memory (Top version only)

W221 W216 Instrument Cluster AMG Style (Top version only)

Enable tank info & L/100KM into KM/L W211 (W203) (w221) and more (Top version only)

Airbag ECU unlock function (Top version only)

DPF Regeneration (Top version only)

No need password when you choose special function in DAS of W204 (Top version only)

Diagnostic W204 /W207/ W212 by DAS Directly (Top version only)

Start HHT Win from desktop icon directly, no need start from DAS.

Offline Coding key provide service. (Top version only)

Product Software Includes:

DAS: the automatically Diagnosis Assistance System

WIS.net: Workshop Information System

EPC.net: Electronic Parts Catalog

ST Finder: Part location finder

STARUTILITIES: the movement management system and self-test

PL 67: Price List tool to find out how much price by input the parts number

Xentry: New software released by Benz Company after 04/2009 by diagnosis new cars.

New Smart TAN Code: Opened special function in DAS program with Smart cars 450/451/452/454, even with the new type smart

Developer model: Engineer mode, remove limitations and open more Special functions.

Benz Disassembly system: Video lessons to teach you how to remove each part from Benz cars with details order steps.

Software language: Multi-languages 23 Languages, you can choose the one you need when you using it.

Normal version: One of 23 languages

Top version: (23 Languages all)

STAR UPDATER V3.0.0.1: Online upgrade tool for Super MB STAR users.

Product Hardware Includes:

Multiplexer: Super MB STAR Diagnostic interface

OBDII 16Pin: For cars with OBDII port

Sprinter 14Pin: For sprinter cars or some vans

38Pin Cable: For old Benz cars with 38 Pin port

4Pin Cable: For old Benz cars fit for 4 Pin port

RS232 To RS485 Serial Cable: Connect Multiplexer to PC/Laptop

Mobile HDD with USB Cable: with all the software per-installed work with any laptops by USB

USB KEY: Security USB Encryption

Verification Letter with Password inside: Used for verify the Super MB STAR and upgrade password.

PCMCIA or Express Card: Used for laptop without serial port

Service Function List:

1. EIS EZS

2. Air Conditioning

3. IC belt warning

4. IC reverse gear warning

5. IC special settings

6. IC search mode unlock

7. ABR erase VIN

8. ABR VIN manual editing

9. ABR Eeprom memory

10. SRS deactivate

11. SRS Systeminfo

12. SRS Training

13. SAM R Alarm

14. SAM F Truck illumination

15. Centr.Lock/H beams/FoglightsR

16. DPF&ECU Flashing

17. CDI2 EGR adjustment

18. CDI4 EGR adjustment

19. ISM Shiftmodule

20. Aut.Transm.Correction Programming

21. OFFLINE Programming

22. FDOK Blocked vehicles

23. FDOK Unlock Doumentation

24. TELLE All roaming

25. MoTelDiS

26. RWTS211

F&Q:

Q: How many years of free updating can we enjoy?

A: Super MB STAR provides one year free update online service. Super MB STAR Lite provides 3 months free update online service.

Q: What else shall I do before using this item?

A: You need setting some configurations before using this tool, we have both video and user manual to teach you how to do that, just follow the steps.

Q: Super MB STAR is able to work with Trucks and change the speed limitation?

A: Yes, Super MB STAR is able to work with different kinds of Benz trucks, and it is able to change the speed limitation, please do that under the legal permission.

Q: What should I do if I do not know how to setting or face some difficulty when install the software?

A: We provide online service 24 HRs, our after-sales service men can help you solve the problem through teamviewer, just contact the sales.

Q: Is this tool able to work with Reset the SBC Function?

A: The Super MB STAR Top Version provides you SBC Reset, TV active and some other functions. You are able to access SBC Special function without password.

JLR Mangoose for Jaguar and Land Rover V134 Newest Version

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 07:08:34 +0800

JLR Mangoose for Jaguar and Land Rover V134 Newest Version

Note:
Software Version: 134
Supported Language: Germany, Russian, French, Dutch, Portuguese, Japanese, Spanish, Italian, English, Simplified Chinese.
No Internet Connecting, Or it will make damage to JLR Mangoose!!!

Description:

Mangoose is a low-cost, high-performance vehicle network interface that connects a laptop directly to the Bus Network via the OBD-II connector. Drew Technologies designed this product to be affordable for Professional Technicians, CarPCs, the aftermarket, and automotive enthusiasts.

Key Features of the Mangoose JLR for Jaguar & Land Rover

J2534 and J2534-1 compliant device driver
Commercial Range (0 to +70℃)
Dimensions: 3" x 1.75"
Operating Voltage: Bus-powered by USB
Host Interface: Full-speed 12 mbps USB 2.0 with J2534 device driver
Lost cost, high performance pass-thru diagnostic tool for use with PC
USB Diagnostics tool for CAN and ISO9141 vehicles
Supports reprogramming for Jaguar 1999 & up, Land Rover 2005 & up.
Simple packaging with electronics contained inside the cable.

Bus Protocols Supported By the Mangoose JLR for Jaguar & Land Rover

CAN Bus (details published soon)
More details published soon, will work with IDS 125 software subscription for dealer level diagnostics & module programming.

Diagnostics with the Mangoose JLR for Jaguar & Land Rover

The Mangoose JLR is a USB pass-thru device that utilizes the SAE J2534-1 API. What this means is that the Mangoose JLR uses a standard communications interface to the vehicle, allowing it to work with 3rd party diagnostic applications. Different diagnostics and data logging applications supported are currently supported by the Mangoose, with more being added all of the time. NEW! Jaguar / Land Rover are now supported for dealer level diagnostics & module programming using their software (available here) and the Mangoose JLR. This includes 2005 & Up Jaguar and 2005 & up Land Rover,and requires a subscription to IDS version 125 & up.

Package List:

Installation CD with device driver (J2534 compatible)
The Mangoose JLR includes a J2534 driver and delivers full-speed (12mps) USB 2.0 performance. This version is compatible with late model J2534 compliant Jaguar & Land Rover models. This includes 2005 & Up Jaguar and 2005 & up Land Rover, requires a subscription to IDS version 125 & up.

FAQ:

Q: Which year Jaguar car can this cable do?
A: This JLR MAGNOOSE can only do Jaguar car after 2005 year, can not do before 2005.

MB Star Compact C4 Fit All Computer Update to 2013.09

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 07:16:32 +0800

MB Star Compact 4 with 2013.09V is the lately updated professional diagnostic equipment for Mercedes Benz cars manufactured after year 2000. It is much difference in the shape from Compact3 and smaller in size ,lighter in weight than Compact3. C4 2008 can do all the works what Compact3 does and it is the replacement of Compact 3-Star.

MB Star Compact C4 Fit All Computer

Software Version: 2013.09
Supported Multi-Language

Description:

Mb Star C4 operates based on the Windows XP system, it includes workshops information system(WIS system), the movement management system and the automatically diagnose system(the DAS system) .C4 2008 STAR works with original computer (COMPACT3) via both of RS232 and 485 protocol.Power can be supplied to original computer (COMPACT3) via the cables.Compact3 star can diagnose varied cars, trucks, buses of Mercedes Benz making.

MB Star C4 Specification:

1.MB Star C4 has rs232/485 interface, which can connect with touch screen and also common screen.
2.MB Star C4 can work in the voltage of 12V/24V.
3.MB Star C4 can supply power to the computer by Power Cable.

MB Star C4 Package List:

1pc x C4 Multiplexer
1pc x 14 pin Connector
1pc x 16 Pin Connector
1pc x OBD2 Cable
1pc x 4 Pin Cable
1pc x 14 Pin Cable
1pc x Communication Cable
1pc x 38 Pin Cable
1pc x HDD

GM Tech2 GM Diagnostic Scanner

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 07:37:29 +0800

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010. TIS2000 do till 2007 year GM car programming.

GM Tech2 GM Diagnostic Scanner

Software Version:

GM English 32.007
SAAB English 148
OPEL English 126
Holden English 145
SUZUKI English 01.210.020
ISUZU English K line 11.53
CAN line 107.021

GM Tech2 Description:

The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles. The Vetronix Tech 2 comes with Authentic GM software and provides support for on-board diagnostics on all GM systems 1992 thru 2010.

Vetronix GM Tech 2 Specifications

1.Dimensions: 12
2.Microprocessor: 32 bit,16 MHz
3.Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
4.Communications: Integral RS232 communication port.
5.Screen: 3.8.8 backlit monochrome with full graphics capability: 320,40 pixels. Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 MB)

GM Tech2 Features

1) Authentic GM software in the Tech 2 Flash means the most comprehensive diagnostic software available for late model GM vehicles.
2) Support for on-board diagnostics on all GM systems 1992 thru current year.
3) Removable hardware modules provide insurance against scan tool obsolescence.
4) Large, easy-to-read backlit screen.
5) RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6) Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7) Ability to view the status of vehicle diagnostic tests as they run.
8) Bi-directional The authentic GM 1992-current year software will provide full bi-directional control when performing power train, chassis, and body diagnostics.

An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications,even those vehicles using other platforms such as OBD I and OBD II.

The Following GM Vehicles Utilize The CAN Interface

05 Buick Allure (3.6L)
05 Buick LaCrosse (3.6L)
05 Buick Rainier (5.3L)
04-05 Buick Rendezvous (3.6L)
04-05 Cadillac CTS (3.6L)
04-05 Cadillac SRX (3.6L / 4.6L)
04-05 Cadillac XLR (4.6L)
05 Cadillac STS (3.6L / 4.6L)
05 Chevrolet Cobalt (2.2L)
05 Chevrolet Corvette (6.0L)
05 Chevrolet Equinox (3.4L)
05 Chevrolet TrailBlazer (5.3L)
05 Chevrolet SSR (6.0L)
04 Chevrolet Malibu (Body/Chassis only)
05 Chevrolet Malibu (3.5L)
05 GMC Envoy (5.3L)
05 Pontiac G6 (3.5L)
05 Pontiac GTO (6.0L)
05 Pontiac Pursuit (2.2L)

GM Tech2 Package List:

Tech-2 Flash Tester
32 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANDI) and instruction sheet download (199.2 KB)
RS232 cable and user manual
RS232-DB9 adapter
DLC Cable, DLC Loopback Adapter
12V Cigarette Lighter Power Cable
SAE 16/19 Adapter
NAO 12/19 Adapter
Battery Power Cable
Storage Case
TIS 2000 CD

VDM UCANDAS WIFI Full System Automotive Diagnostic Tool (Better than Autocom)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 08:09:43 +0800

VDM UCANDAS is a Wireless Automotive Diagnosis System, perfect replacement for Autocom CDP, it is only for car diagnosis, multi-language.No Need to Register and be activated.

DM UCANDAS WIFI Full System Automotive Diagnostic Tool

VDM Ucandas Highlights:

1. Software Version: 3.1 [ Now There is No CD Provided In The Package. So You Need to Download The Software On Our Official Websit
2. Languages: Chinese/ English/ Polish/ French/ Spanish/ German/ Turkish/ Italian/ Vietnamese/Korean.(Besides English,you can have another two languages at most, If you want to add language for your VDM UCANDAS, please provide the serianl number and the language you need)
3. WIFI and USB Connection: The WIFI direct distance is less than 50M.
4. Online Update: you can go to " http://www.ucandas.com/ " to update your device. After one year, you need pay about 80USD for each update.

5. VDM UCANDAS can support new computer system: Windows XP, Windows 7, Windows 8. No WP8/Win8 RT

6. Our Customers feedback VDM UCANDAS better than Autocom.

7. No need Activation or Register before using.
8. VDM UCANDAS Covers 47 Car Brands:

European Car Models: Audi, Benz, BMW, Citroen, Fiat, Ford EU, Jaguar, Lancia, LandRover, MINI, Opel, Peugeot, Porsche, Renault, Saab, Seat, Skoda, Smart, Vauxhall, Volvo, VW.

Asia Car Models: Acura, Honda, Hyundai, Infiniti, Isuzu, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Subaru, Suzuki, Toyota,Daihatsu,Daewoo

Asutralia Car Models: Ford AU, Holden

USA Car Models: Chrysler, Ford, GM.

China Car Models: Chery, Geely, GWM

WIFI VDM UCANDAS Supported Systems:

ME-Motor electronics, CDI-Common Rail Diesel Injection, ETC-Electronic transmission control, ESM-Electronic selector module, SBC-Sensotronic Brake Control, ESP-Electronic stability program, BAS-Brake assist, Suspension, TPC-Tire pressure monitor, Airbag, CGW-Central gateway, EIS-Electronic ignition switch, OCP-Overhead control panel, UCP-Upper control panel, XALWA-Xenon headlamp, HRA-Headlamp range control, ATA-Anti-theft alarm system, IC-Instrument cluster, ASSYST-Active Service System, SCM-Steering column module, EPS-Electrical power steering, PTS-Parktronic system, EPB-Electric parking brake, COMAND/AUDIO, CD/DVD, TV tuner, CTEL-Cellular telephone, DCM-Door control module, ESA driver-Electric seat adjustment driver,ESA passenger-Electric seat adjustment passenger, AAC-Air conditioning, WSS-Weight sensor system, SVMCM-Special vehicle multifunction control module.

WIFI VDM UCANDAS Covered Function:

Quick Test, Read ECU Info., Read DTCs, Erase DTCs, Clear learning value, Data Stream, Actuations, Read freeze frame data, Read/Write VIN, Basic Reset, Control unit adaptations, Throttle adaptations, Air bleeding, Level calibration, Theft alarm Reset, Key programming, Oil change, Idle speed learning, Idle speed Adjustment, Ignition timing adjustment, Camshaft timing control learning, Maintenance functions, ECU Initial startup, ECU initialization

UCANDAS VDM Introduction

The state-of-art UCANDAS is delicately engineered and built by P&T Electronic Technology Co., a scan tool R&D company based in China. Established in 2009, P&T is now recognized by the automotive aftermarket industry as one of the fastest growing scan tool companies providing the most extensive and best price-performance ratio OEM-level diagnostic products and first-class customer support in the world. The UCANDAS Diagnostic System is ingeniously designed to recreate the functionality of the OEM tools used by automotive manufacturers’ dealers, empowering independent garage shops to provide complete servicing in their own shops, including data stream, reading and clearing of diagnostic trouble codes, component activation and immobilizer key coding, etc.

VDM UCANDAS Features

Supporting ISO 9141-2, K/L line, SAE-J1850 VPW, SAE-J1850 PWM, CAN ISO 11898, ISO15765-4 protocols.

High-speed, medium speed and low speed CAN-BUS, Single CAN-BUS diagnosis protocols is supported.

Can check out the year and model of the vehicles automatically and quickly.

All inclusive software coverage - European, American, Asian and Australian prevalent vehicles.

OBDII diagnostic connector has a wide compatibility, which don’t need to replace other connector, during the testing.

Hardware architecture uses new design with multiple protection, interference and stability. Built-in overvoltage protection module is applied, in order to protect scanner and vehicle against accidental damage during checking.

Can work stably in high and low temperature environment, and work well.

Specifications

MCU: ARM7 processor, 66MHz

Input Voltage: DC 8-18V

Communication Mode: USB and WIFI

Storage Temperature: -30 to 120 C(-22 to 248 F), Relative Humidity: <90%

Operating Temperature: -30 to 120 C(-22 to 248 F), Relative Humidity: <90%

VDM UCANDAS Package List:

1pc x VDM Main unit with OBDII Cable

1pc x USB Cable

1pc x Carrying Bag

GNA600 2012 Newest Version 2.027V

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 10:18:40 +0800

GNA600 interface module kit works with the OEM-H-onda Diagnostic PC Software (HDS). This is the replacement for the previous dealer tool H-onda HIM. It can diagnose all H-onda and Acura vehicle systems on models from 1996 to 2012. Currently GNA600 doesn't support ECU tuning.

H-onda GNA600 2012 Newest Version V2.027

Software Version: V2.027
Supported Languages: English, Portuguese, Spanish, French, Indonesian, Korean, Thai, Turkish, Vietnamese, Chinese, Chinese (Taiwan)

What is The Highlights of GNA600 2012 Version?

1. GNA600 supports H-onda FCX Clarity hydrogen fuel vehicles
2. GNA600 use USB 2.0 communication
3. GNA600 can change the VIN code of CANBUS cars.
4. GNA600 can program the smart key without the programming password
5. GNA600 supports all Acura
6. GNA600 cancel all passwords
7. GNA600 supports odometer rewrite via OBD-16 (Condition: the vehicle with Body-Electric)
8. Currently GNA600 doesn't support ECU tuning.

GNA600 Specification:

GNA600 comes with the latest software to access immobilizer, reprogram key and install new or used PCM's functions. Full access to all systems using the only guaranteed accurate data available. This kit will also give you access to the latest reflash software for PCM updates. This software also includes a scan tool with OBD2 access to all other cars 1996 on.

GNA600 Package List:

1pc * GNA600 Main Unit
1pc * 16 pin OBD2 Cable
1pc * 3pin to 16pin cable
1pc * USB external Cable
1pc * DVD

HDS Cable OBD2 Diagnostic Cable

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Wed, 25 Dec 2013 10:26:05 +0800

H-ONDA HDS cable obd2 diagnostic cable support Honda HDS OEM diagnostic software. It supports most 1996 and newer vehicles with OBDII/DLC3 diagnostics.

H-ONDA HDS Cable OBD2 Diagnostic Cable

Supported Languages: English/ Chinese/ Spanish/ French/ Korean/ Portuguese/ Indonesian
Operating System: Windows XP SP3
Update: Via Internet

HDS Diagnostic Cable Function:

Supports most 1996 and newer vehicles with OBDII/DLC3 diagnostics
Support Honda HDS OEM diagnostic software
Supports Diagnostics and Active tests
Easy to install and carry
Cost-effective
High performance with ARM chip inside
Status LED

HDS Diagnostic Cable Specification:

1.Construction

Diagnostic Interface:16 PIN
USB Interface: USB 2.0
Power: DC 5 V - 36 V
Consumption: 0.3 W
Dimensions: 76 mmx 43 mm x 19 mmLanguage

2.Supported Protocols

K-Line ISO 9141
KWP 2000 ISO 14230-4
CAN 2.0B ISO 11898
CAN ISO 15765-4

HDS Diagnostic Cable Software Display:

Package List:

1pc x H-ONDA HDS CABLE
1pc x CD driver(with user manual in it)

Mb Star C3 Pro With Seven Cable For BENZ Truck and Cars Update To 2013.09

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 01:35:29 +0800

XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to 2013.09, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

Mb Star C3 Pro with Ceven Cable For BENZ Truck and Cars

Highlights:
1. Newest software: 2013.09
2. Multi-Language: English, French, Spanish, Portuguese, Italian, Japanese, Ruassian, Croatian, Czech, Danish, Dutch, Finish, Greek, Hungarian, Korean, Polish, Romanian, Swedish, Turkish, Chinese
3. MB Star C3 has past truck test. It can used to do benz trucks

Mb Star C3 Functions:

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic;(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance
9.information consultation
10.component location diagram
11.wiring diagram

Mb Star C3 New Features:

1.This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2.With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3.Every hard disk has it's special number,have self-test function.Just give us the self-test report and the number,we will find out what's the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!
4.What is most important, this C3 has past truck test.It can used to do benz trucks.

Mb Star C3 Testable System:

ENGINE
AUTO-SPEED
AIRCONDITIONAL SYSTEM
SRS
ABS
ASR
MPL
GM
BENZ ORIGINAL ANTI-THEFT
DASX SYSTEM
KEYZESS GO SYSTEM
OBD-II SYSTEM

Product Software Includes: (Version: 2013.09)

1.D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2.W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3.EPC.net : Electronic Parts Catalog
4.ST Finder:Part location finder
5. STAR UTILITIES : the movement management system and self-test

Mb Star C3 Package List:

1x MULTIPLEXER
1x 16pinOBD II cable
1x 4pin cable
1x 38 pin cable
1x 14pin track cable
1x COM cable
1x RS232 to RS485 Cable
1x Serial adapter cable
One 80G Hard Disc (2013.09)

X-VCI XVCI Ford VCM( Ford/Mazda/Jaguar/LandRover)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 01:48:29 +0800

Xtool X-VCI box not only support J2534 reprogramming, but it is also the device of OEM scan. J2534 is the har-dware standard for OEM scan.Mazda,Ford,Landrover, and Jaguar use J2534 standard for scan now. So Xtool tech X-vci can work with many original diagnostic softwares, and same function as the original tools.

X-VCI Ford VCM ( Ford, Mazda, Jaguar, LandRover)

Software Version: Ford & Mazda: 75
Jaguar & LandRover: 130

Protocol Support

RP1210A, RP1210B, and J2534 API support
USB vehicle-to-PC connectivity
Protocol coverage for automotive to heavy duty vehicles:
CAN - J1939/CAN125/CAN250/CAN500/CAN1000
2nd CAN - J1939/CAN125/CAN250/CAN500/CAN1000
Automatic bit rate detection for both CAN channels
J1587/J1708
J1850
ISO 15765 (Diagnostic CAN)
ISO 14230 (KWP2000 over ISO9141)
J2534

Professional Diagnostic X-VCI Same as Ford VCM IDS Tool,Can work with on Ford and Jaguar

As we all know Ford VCM is a professional diagnostic tool for Ford &Mazda, Jaguar & Land Rover. Xtool X-VCI can replace the VCM, it is not only J2534 product ,but also a professional tool. it can works on Ford vcm IDS V75 and JLR V128. Function same as the original VCM.
X-VCI VCM IDS scanner provides multiple vehicle serial communication interfaces to meet the requirements of all Ford Motor Company vehicles.
X-VCI VCM IDS Newest version: IDS V75, Jaguar & Land Rover: JLR 128. Ford Rotunda Dealer IDS VCM newest version adds some kinds of new cars: it works with ford and Mazda up to 2012 year; It is compatible with Jaguar till 2012 year and with Land Rover till 2012 year.
The X-VCI 16-pin DLC cable is used to connect the X-vci to the vehicle. The Xvci connect to the laptop through the USB Adapter Cable.

Hardware Specification:

Processor: 32 BIT high speed ARM processor
Flash: 512KB
RAM: 64KB
Diagnostic Socket: J1962 OBD-II 16 connector
Wired socket: USB2.0/USB1.1 compatible
Light: 4 LED light, indicating work statuses
Power: Vehicle power input: DC 9V-36V, or USB DC 5V
Consumption: Below 1W
Working Temperature: -20~ +70 �C
Storage Temperature: -40~ +85 �C

Package List:

1pc x X-VCI FORD VCM Main unit
1pc x OBDII 16Pin Adapter
1pc x Main Cable
1pc x USB Cable

VAG USB 409 Interface OBDII Car Diagnostics Cable with FT232BL Chip

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 01:55:44 +0800

Primary Function: USB VAG-Com interface cable

Vag 409 VAG COM 409 Interface VAG-COM 409 Cable

Description:

Primary Function:USB Vag-Com interface cable
OBDII Plug: J1962 16-Pin Male (to Car)
USB Port enabled
Operating Software Compatibility: Windows 98SE / ME / 2000 / NT and XP.
Supports terminal (K) bus communication
Terminal (L) ignition for waking up car computing system (ECU) engine control unit
Has 3 different protocols with same OBD2 connector including ISO/KWP, VPW, PMW.
Refer to your car user manual or check with your car dealer or local mechanic whether your car is compatible with this product.
Compatible Vehicles: Volkswagen, Audi, Skoda, Seat

Supported Vehicles:

1.Audi Models:
1)Compatible: A2 / A3 / A4 Cabriolet / A6 / A8 / S2 / S3 / TT
2)Not Compatible: 80 / 100 / 200 / A3(8P) / A4(B7) / A6(C6/4F) / A8 / A8L(D3/4E) / Q7
2.SEAT Models:
1)Compatible: Alhambra / Altea / Arosa / Cordoba / Ibiza / Inca / Leon MK 1 / Leon MK 2 / Toledo
2)Not Compatible: Altea (5P) / Leon (1P) / Toledo (5P)
3.Skoda:
1)Compatible: Fabia / Felicia / Octavia MK 1 / Octavia MK 2 / Superb
2)Not Compatible: Octavia (1Z)
4.VW:
1)Compatible: Beetle / Bora / Caddy / Corrado / Golf MK2 / Golf MK3 / Golf MK4 / Jetta MK3 / Jetta MK4/ Lupo / Passat MK3 / Passat MK4 / Polo MK3 / Polo MK4 / Touran / Touareg / Transporter T3 / Transporter T4 / Transporter T5.
2)Not Compatible: Caddy (2K) / Golf MK5 (1K) / Golf Plus / Jetta MK5 (1K) / Passat MK5 (B6) / Passat MK6 (B6) / Phaeton /

Specification:

Manufacturer Ref: C44D47A6AF72
Catalog Ref: Car accessories, cable fault code, VAG-COM, OBD2 cable

Other Features:

Also supports ISO9141 protocol
No DC or alternate power supply needed, just connect to your car and computer
Work with most Volkswagen and Audi models sold worldwide from 1994 to current year
The CVFG-A11 cable cannot work if your car uses a protocol bus system like VPW, PWM or CAN -bus
The K/L Diagnostic interface cables works on ISO/KWP (Key Word Protocol) that were launched after 1996.

Package List:

1pc x VAG COM 409.1 Cable
1pc x CD Drive

VAG Drive Box Bosch EDC15/ME7 OBD2 IMMO Deactivator Activator

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:00:13 +0800

Vag drive box bosch edc15/me7 obd2 immo deactivator corresponds to the Bosch control unis types EDC15 (Diesel) and ME7 (Patrol).

Driver Box OBD2 IMMO Deactivator & Activator

Description:

The EDC15 control for diesel engines is installed in the models of brands VW, AUDI,SEAT and SKODA from 1999 onwards.
The ME7 control for Patrol engines up from 1.6 I is also installed in the models of brands VW, AUDI,SEAT and SKODA.Also backed up are control unit types ME7.5, ME7.5.1, ME7.1, ME7.1.1

User Guide:

Simply plug the Drive Box EDC15/ME7 into the vehicle's diagnostic socket (OBD2)
Then put the OBD2 and switch to '' OFF ''on Drive box .
After only 20 to 30 seconds the immobilizer DEACTIVATED (IMMO OFF)
NO NEED TO COMPUTER!!!
The led on the tool will start to flash slowly, after some seconds the led flashes fast, that mean the immo function is disabled
The car will work without Trasponder key!
Recovery ; switch to '' ON '' on Drive box .
After only 20 to 30 seconds the immobilizer ACTIVATED (IMMO ON)
Adapted for following models,
with in BOSCH motronic trypes EDC15(Diesel) or ME7 (Patrol)
AUDI A2/A3/A4/A6
SEAT Cordoba/Ibiza/Toledo/Toledo
SKODA Octavia
SKODA Octavia II
SKODA Scout
SKODA Roomstar
SKODA Fabia
SKODA SuperB (up to 2008)
PORSCHE Cayenne (patrol,old model)
VW Golf IV / Bora (from 2000 onwards)
VW Polo (from 2000 onwards)
VW Caddy (from 2000 onwards)
VW Eos / Tiguan
VW Passat 3BG (up 2004 - except 2.5 V6)
VW T4 (from 2000 onwards)
VW Beetle

Basically Applies:

not for 1,8T and 2,0TFSI models + 1.4 + 1.6 patrol engines.
The Tool on this page are sold exclusively to autohoritis and tradespersons with special legatimation for the automobile industry!

Package List:

1pc x Driver Box OBD2 IMMO Deactivator & Activator

Volvo Vida Dice 2013A Volvo Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:00:20 +0800

VOLVO DICE 2013A is a tool used together with VIDA all-in-one to communicate with vehicles. Communication makes diagnosis and troubleshooting possible, as well as downloading software.

Volvo Vida Dice 2013A Volvo Diagnostic Tool

Features:
1. Software Version: 2013A
2. OBD Volvo Vida Dice 2013A can only be used on Win7 Operating System
3. Language: English, French, Spanish, Swedish, Portuguese

Volvo Vida Dice Description:

1.DICE - Diagnostic Communication Equipment, is a tool that is used together with VIDA all-in-one to communicate with the vehicle. Communication makes diagnosing and troubleshooting the vehicle possible, as well as downloading software.
2.DICE has an integrated CARB cable, which is connected to the vehicle's diagnostic socket. When connecting to the vehicle, DiCE is powered as long as the battery is charged.
3.DICE has a folding hook that is designed for hanging the unit from one of the grab handles in the vehicle for example.
4.DICE is equipped with four status LEDs that indicate the status of the software, the USB and Bluetooth communication and the interface to the car.
5.At one end of the unit, there is a DC input where a battery cable or adaptor(12V) can be connected. The adaptor is used when upgrading and troubleshooting the DICE.
6.In the other end of the unit, there is a removable cover that could be removed by turning the screw on the cover.

Volvo Vida Dice Function:

1.Administration - General information, design and function
2.Standard components, service materials and consumables. General information (among other things, control modules, SRS, general safety) as well as 3.service and maintenance
4.Engine with mounting and equipment
5.Electrical system
6.Power transmission
7.Brakes
8.Suspension and steering
9.Springs, shock absorbers and wheels
10.Body and interior - among other things, diagnostics, design and function, repair and spare part information
11.Other - special vehicles, e.g., ambulances, police cars. Components that deviate from standard.

Volvo Vida Dice Installation Tips:

1. Run the CD-ROM ,,Choose the languages:[EN-GB...], install it to list, till all installations finished ,then restart the computer.
2. After restarted, once the service icon(The bottom of the right corner) is available(VIDA Status: Running) , and choose the below cracked executing documents [VIDA2013A_patch.EXE], install it to list, then retart the computer.
User Name: admin

Volvo Vida Dice Package List:

1. DICE device with OBDII cable
2. USB A to MINI USB angled cable
3. DVD with VIDA 2013A English (activated)
4. Version we offer now: VIDA 2013A English (locally activated, no online services; login as "Info-pc")

Volvo Vida Dice Requirement on Computer:

1. It must be windows 7 professional operating system
2. It need to be Internet Explorer 8
3. Computer memory need over 3GRAM
4. C:// must have 40GB space
5. Software must install on C://
6. It must be NTFS format

VOLVO VIDA DICE 2013A Language:

Q:I make a test of X431 diagun full pack & the report as below:
Fiat punto 2007 work
ford fiesta 2006 work
bmw x5 e70 2006 work
renault scenic 2005 work
saab 9-5 2005 work
mercedes w203 2002 work
volvo s80 2001 not working
volvo v70 2001 not working

VAG CAN Commander 5.5+ Pin Reader 3.9Beta

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:07:57 +0800

VAG CAN Commander 5.5+ Pin Reader 3.9Beta is a diagnostic tool for cars from Volkswagen Audi Group which using WP2000-CAN TP2.0, Full support of Audi A3/A8 - security code reading and odometer correction via OBDII.

VAG CAN Commander 5.5+ Pin Reader 3.9Beta

Description:

It is a diagnostic tool for cars from Volkswagen Audi Group which using WP2000-CAN TP2.0 ,Full support of Audi A3/A8 - security code reading and odometer correction via OBDII.

Function:

1.Odometer correction via OBDII
Special functions about instrument clusters from VDO which allows changing of odometer value, reading security access code of immobilizer, reading eeprom and flash memory of instrument cluster.
TV-Activation function for MMI based vehicles (Audi A8, Audi A6, and Audi Q7)
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80).
This can allow of users to investigate and diagnosis some new units untouchable for remaining diagnostic tools
Manual definition of running diagnostic session not like remaining diagnostic tools always standard diagnostic session 0x89
Broadcast diagnostic request disable normal communication,clear DTCs,Logistic (transport) mode,...
Allows managing of brand new immobilizer units where is allowed programming of PIN,SKC,BGW,MAC.
Most of popular diagnostic requests identifications, coding, adaptations, DTCs and so on.

List of vehicle from function odometer change/security code reading:

VW Golf5
VW Jetta (MY2006)
VW Caddy
VW Cross golf
VW Touaran
VW EOS
VW Individual
VW Passat platform B6 (MY2006)
Seat Toledo (CAN)
Seat Leon (CAN)
Seat Altea
Seat Altea XL
Skoda Octavia II
Skoda Scout
Skoda Roomster
Audi A3
Audi A8
Audi A6 - odometer correction
Audi Q7 - odometer correction

IMMO box reader and programmer, VAG kilometers program and change via OBD II connector.

You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Windows installed.
Car models covered by Pin Reader software:
VW GOLF IV VDO 1998-2005
VW GOLF IV Bosch/Motor Meter petrol/diesel ECU ?2001-2005
VW GOLF IV, BORA/JETTA, PASSAT Motor Meter - 1997-2000
VW PASSAT VDO B4, B5 & B6 1998-2005
VW PASSAT Bosch/Motor Meter petrol/diesel 2001-2005
VW BORA - JETTA VDO 1998-2005
VW BORA - JETTA Bosch/Motor Meter petrol/diesel 2001-2005
VW POLO VDO 2002-2006
VW BEETLE Magnetti Mareli 1998-2005
SKODA OCTAVIA Motor Meter - 1997-2005
AUDI A3, A4, A6, TT 2000+ TT USA Magnetti Mareli
AUDI A3 VDO 1997-2003
AUDI A4 VDO 1998-2005
AUDI A4 Bosch/Motor Meter dashboard petrol/diesel 2001-2005
AUDI A4, A6, A8 External IMMO Box (system 1) 1995-1998
SKODA FABIA VDO 2000-2006
SKODA OCTAVIA VDO 1997-2005
SKODA OCTAVIA Bosch/Motor Meter petrol/diesel ECU 2001-2005
KIA/HUYNDAI 6 digits pin code calculator from VIN number for models after 2000

Package list:

1pc x VAG CAN Commander 5.5+PIN READER Cable
1pc x CD Drive

VAG TACHO USB 2.5 For VW/AUDI Free Shipping

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:11:03 +0800

Latest Software version is 2.50
Latest update: VW GOL (Kostal immo box) , ME 7.xx engine ECU's PIN code reading
Direct USB to OBD Connection,All hardware inside OBD connector.

VAG TACHO USB 2.5 For VW/AUDI

Latest Software version: 2.50

.Latest update: VW GOL (Kostal immo box) , ME 7.xx engine ECU's PIN code reading
(This means:VW Passat B6, Bora/Jetta, Polo to 2004 year, Golf 4, Sharan to 2003 year,Skoda Octavia/Fabia to 2004 year , some Seat dashes up to 2004 year ect...)

VAG TACHO USB 2.5 Description:

1.VAG Kombiinstrument / Immo box eeprom programmer...by OBD connector.
2.Direct USB to OBD Connection. All hardware inside OBD connector.

VAG TACHO USB 2.5 Function:

Automatic functions: Change mileage, Read PIN code.
All this by using car OBD connector.Without disassembly dash or immo box from car.

VAG TACHO USB 2.5 Support list:

1.Bosch/Motometer dashes for VW 2001-2003 years V07.04, V07.05, V07.08, V07.13 (with scan for 2'nd pass)
2.Audi A4,A6,A8 separate immo box 1994-1999 read PIN code,and read/write eeprom!
3.Audi A3,A4,A6,TT, New Beetle Magnetti Marelli M73 (1998-2003 year) read PIN code / change mileage!
4.New Beetle Magnetti Marelli M73 (2001 to 2005 year) read PIN code
5.Almost all VDO dashes for VW/Seat/Skoda up to year 2004 read/write eeprom.
6.Almost all VDO dashes for Audi up to year 2001 read/write eeprom.
7.Almost all MotoMeter dashes for VW/Seat up to year 2001 read/write eeprom.

VAG TACHO USB 2.5 Package list:

1pc x Tacho USB 2.5
1pc x CD Drive

New MB Star C3 Pro for Benz Trucks & Cars Update to 2013.11

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:18:02 +0800

New Mercedes Benz Star C3 is a professional diagnostic tool specially for mercedes benz cars. Mercedes Benz Star C3 can do benz trucks and new types of mercedes cars.Super quality,Big aluminum box for package, easy to take at hand.

Best Mercedes Star Diagnosis New Mb Star C3 Pro

Highlights:
1. Latest Version: 2013.11
2. Multi-Language: English, French, Croatian, Italian, Japanese, Russian, Spanish, Czech, Danish, Dutch, Finish, Greek, Hungarian, Korean, Polish, Portuguese, Romanian, Swedish, Turkish, Chinese
3. New feature:do benz trucks and new types of mercedes cars.

Best Mb Star C3 Pro Description:

XP-STAR(Auto-Link Blue STAR) realizes all the functions of official factory BENZ Star2000: reading out and erasing trouble code; reading the real-time data of sensor and actuator; coding and programming. It applies the latest high-tech central gateway system of car model 221/211 and 203 with software version updated to October of 2006, can enter all the Benz cars, such as autobus truck, saloon car, sports car, smart car and so on.

Best Mb Star C3 Pro Features:

1.This version of MB STAR C3 can fit all computers,it is not only limited on IBM T30,provide great convenience to customers.It has one hard disk contain DAS and WIS system.
2.With a 7 meter RS232-RS485 cable,provide more convenience to garage when diagnose.
3.Every hard disk has it's special number,have self-test function.Just give us the self-test report and the number,we will find out what's the matter with this tool,avoid the shipping charge when this tool need fix.Great improvement!

Best Mb Star C3 Pro Functions:

1.1989~up to now Car, Bus, Truck, Sprint, Smart ;
2.All electric system Diagnostic(Do not include flash code)
3.reading trouble code
4.erasing trouble code
5.live-data
6.adaptation
7.component testing
8.maintenance.
9.information consultation
10.component location diagram
11.wiring diagram

Best Mb Star C3 Pro Specification:

1.Product Software Includes:
1)D-A-S: the automatically Diagnosis Assistance System ,Concise interface and straightforward operation with IBM high-quality computer can realize the quick and accurate code reading and the whole car system testing
2)W-I-S net: Workshop Information System Supply the whole view of the wiring diagram in a car,component location diagram and maintenance method. What you do is to enter the chassis number, and then you will get the manufacture data, engine configuration and the car model -all in detail.
3)EPC.net : Electronic Parts Catalog
4)ST Finder:Part location finder
5)STAR Utilities : the movement management system and self-test
6)Xentry: New software released by Benz Company after 04/2009by diagnosis new cars.

2.Testable System:
Engine
Auto-Speed
Airconditional System
SRS
ABS
ASR
MPL
GM
Benz Original Anti- Theft
Dasx System
Keyzess Go System
OBD-II System

Best Mb Star C3 Pro Package List:

1 x MULTIPLEXER
1 x 16pinOBD II cable
1 x 4pin cable
1 x 38 pin cable
1 x 14pin track cable
1 xRS232 to RS485 Cable
1 x Aluminum box
1 x 160G Hard Disc(2013.11V)

Best Mb Star C3 Pro FAQ

Q: What is the difference between the new mb star and old mb star c3?
A: New mb star c3 can do benz truck very well, solve the problem that can not do benz truck for the old mb star c3. And it also can do new types benz cars.The software is 11/2010 version, 160G hard disk with software including the pacakge of new mb star c3. But the software for old mb star c3 is 05/2010 or 01/2010, 80G Hard disk together with the package, if you want the newest software,you need to buy it from our website.

VAG DASH K+CAN V4.22

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:22:24 +0800

This high-performance tool covers up the new generation of instrument clusters from 2002.Included are GolfV,Touran, Passat B6, Jetta, the new Seat models, such as Altea II and the new Skodas.

VAG DASH K+CAN V4.22

Description:

EDC16 / EDC15 / ME7 per OBD den EEprom Lesen und Schreiben (EDC15/ME7 komplett EDC16 derzeit KM stand wird standig erweitert.

Function:

This high-performance tool for VW / SEAT /SKODA cars enables you to:
1.recalibrate the odometer
2.add keys to the car even though you don't have all existing keys available
3.do key adaptation without 5 minutes delay on new keys
4.read out the login / secret key code (SKC)
5.write the vehicle identification number and the immobiliser number
6.download and store the entire immobiliser block decrypted
7.clone instrument clusters by writing the immobiliser block from a file
8.read out trouble codes of CAN-ECU′s and erase them

Those functions are absolute unique and give you the chance to earn the money when you normally have to send away your customer.

Examples

An example:
a customer wants an additional key adapted to his car. The normal diagnostic procedure requires that all adapted keys are available.Unfortunately your customer brought only one key along.At this point you have to send your customer away (and with him his money ...)
Not with VAGdashCAN. You can add a key to the existing ones without erasing them. You start the procedure with the new key and after some seconds it is adapted to the car. You don't have to wait 5 minutes for the adaptation channels to become reachable.

Another example:
A customer wants to change his instrument cluster. Normally this is procedure with a lot "ifs and buts". Not with VAGdashCAN, because you are beyond standard diagnostic procedures! Just read out the origin immobiliser block and store it. Then you change the instrument cluster and write the origin immobiliser block into the new cluster. That's it.
No further adaptations are necessary. You don't need new keys.You don't have to care for immobiliser type classes

Supported Cars:

Audi A4 Bosch RB4 2001 - 07.2005 KM-Stand,Login,Schlusseldirektanlernungsfunktion
Audi A3 VDO 2003 - 2004 KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Touareg Phaeton VDO KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Golf V VDO 2003 + KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Touran VDO 2002 + KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Caddy VDO 2003 + KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Jetta VDO 2003 + KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Passat B6 VDO 2004 +KM-Stand
VW Eos - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Individual - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
VW Crossgolf - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
SKODA Octavia II - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
SKODA Scout - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
Skoda Roomster - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
SEAT Altea XL - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
SEAT Altea - 07.2006 KM-Stand,Login,Schlusseldirektanlernungsfunktion
SEAT Leon VDO 2005 + KM-Stand,Login,Schlusseldirektanlernungsfunktion

Software Installation:

1.uninstall the vagdash software first if you installed it before.
2. connect the vagdash cable with the computer
3. install driver first. make sure select USB port, NOT COM port!
4.then install the software.

4-IN-1 VAG TOOL KIT

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:29:47 +0800

4-in-1 vag tool kit can fulfill functions of vag dash com+can, vag dash com,vag ecu tool,vag key login. 4-in-1 vag tool kit is a powerful and newest diagnostic tool for vw audi cars!

4-IN-1 VAG TOOL KIT

EDC16 / EDC15 / ME7 via the OBD EEprom read and write (EDC15/ME7 completely KM EDC16 currently stand will be constantly expanded.

VAG DASH CAN is a newly designed program of our house.

VAG vehicles that the new generation.These are now on the diagnostic socket set.
From the Volkswagen Touran, new combi-tools installed,only via the CAN-diagnosis can be addressed.
The VAG DASH CAN determines the LOGIN and allows an adjustment or recovery of the KM-stand.

A special highlight is the Schlusselanlernungs function.

Pushing a button allows you to teach key and without waiting 5 minutes and without that all semi-key must be available.
In addition, some extra features, in everyday life workshop a valuable aid.
This includes, inter alia, the diagnostic capability of each joint in the vehicle CAN controllers.
Now you can order for these vehicles the error memory read and delete.
A valuable extension of your spectrum.

Secure your market advantage, by selecting one of the first to of this exceptional software.

VAG DASH COM

VAG DASH COM is the unique advanced diagnostic tool to read out the internal memory of your Instrument cluster
You can display the login code, recalibrate the odometer and rewrite the EEpromdata in case of changing an instrument.

VAG DASH COM covers up the models 1998-2004 such as:

Golf IV
Passat
Polo 6N
Eurovan T4
Eurovan T5
Skoda
Seat
Audi A3 / A2 / A6
Audi A4 till 2000

All those models with communication via K-line

VAG ECU TOOL

The tool for the complete access to all EEpromdaten with VAG-engine control units of type EDC15 and ME7.
Read and write access to the EEprom.
Reading the secret odometer (if stored in the engine control unit)
Immo-off function, login display, VIN change - everything about the diagnosis socket - not removing the ECU.
With the write function is motor control "cloning" - no need to teach.
Indispensable for workshops, recovery or Chiptuning.

Functions of the program:

Serial EEprom read and save
EEprom checksum checking and correction
IMMO on / off
EEprom from a file and write (clone function)
Read / write access to the login
Read / write access to the chassis number
Read / write access to the Immobilizernummer
Kilometers Motronic in the read and write (if available)
In the ME7 .** controllers can also perform the following functions:
Offset channels
Mixture enrichment
Idling torque change
Lambda value
Idle speed change
Correct charge (only for Turbo engines)
Ignition timing change

Supports the following types of motor control of BOSCH:

EDC15
EDC15VM
EDC15P
EDC15P + BOSCH ME7.5
BOSCH ME7.5.1
BOSCH ME7.1
BOSCH ME7.1.1

4.VAG KEY LOGIN

The tool used to determine the login code in many VAG-no speedometer,Engine ECUs and Immobilizer box. The integrated software make this the perfect tool for the key service Included are the special OBD connection interface, USB cable and the software on CD.

The following control and tachometer options are supported:

VDO speedometer VW / Audi 1998-2005 (with Seat / Skoda partly until 2006)
Motometertachos VW 1998-2004 (Golf, Passat)
Magneti Marelli M73 tachometers 1998-2001 (eg, TT, Beetle)
EDC15 VM 2000-2004 (eg T4, Golf4, Passat 3BG with distributor injection pump)
EDC15 P + 2000-2004 (all PumpeDuse, Golf4, Passat, A4, A6)
ME 7.5 (eg, 1.8T, TT, V5)
ME 7.1.1 (eg, R32, Audi V6)
Temic IMMO the boxes of the LT's to the Year 2005
Most models of the white boxes Audi 12polig 1994-1998
6 pin boxes VW 1994-1998 (only with key semiskilled readable)

VAG Dash CAN V5.14

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:39:21 +0800

VAG Dash CAN V5.14 is a professional VAG group ECU reading and immo box information reading tool. It can used on BOSCH EDC15, BOSCH EDC16, ME7.* /MED 9.5,ME7 CHANNELS.

VAG Dash CAN V5.14

VW / SEAT / SKODA

Please press the button as the picture show in order to read out the VDO instrument clusters of the last generation.
An example is the Golf Mark V from 2003 up to 06.2006.
Some SEAT and SKODA models are equipped with clusters of that type until MY 2009.

PASSAT
Please press this button n order to read out Passat B6.
In those cars you cannot get immobiliser information from the instrument clusters, since the immobiliser unit is part of the convenience module.

AUDI A3
Please press this button in order to read out AUDI A3 instrument clusters of the brand VDO.

AUDI A4
Please press this button in order to read out AUDI A4 instrument clusters BOSCH RB4.

PHAETON / TOUAREG
Please press this button n order to read out Phaeton and Touareg instrument clusters BOSCHRB4.

NEW BEETLE / AUDI TT
Please press this button in order to read out Magneti MarelliM73build into New Beetleand AUDI TT.

BOSCH EDC15
Diesel Control units are very often used since 1999. Those units cover up most of the diesel vehicles at VAG.
SEAT and SKODA equipped their cars some years longer with ecu´s of that kind.

BOSCH EDC16
Those Diesel Control units are built into cars since 2002. They are the most frequently use ECUs in Diesel Cars of the latest generation.

ME7.* /MED 9.5
The engine ecu type BOSCH ME7.* was used in petrol cars such as Golf IV or Audi TT. You can read out following types of ecu´s: ME7.5, ME7.1, ME7.5.1, ME7.1.1.
The ecu ME7.1.1of the Golf V is not implemented yet

ME7CHANNELS
When you click on this button , you reach the EEprom adaption channels of the BOSCH ME7.* engine control unit.
Those are for example the SEL scaling and the idle speed offset.

IMMOBILISER BOXES
When you click on this buttonyou can read out the login code from the single standing Immobiliser units. Whit boxes from Audi A4 with 12pin connector and boxes from LT. As well you can read out boxes from 1994-1998, but only when an adapted key is inserted into the lock.

ADS-1S PC-Based Universal Fault Code Diagnostic Scanner

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:41:34 +0800

ADS-1S is a Full-line vehicles fault diagnostic scanner system, which is based on pc desktop and laptop platform. It can test cars manufactured in Asia, America and Europe countries. It supports all kinds of vehicle communication modes.

ADS-1 All Cars Fault Diagnostic Scanner

Product Feature:

Hardware is compatible with kinds of pc, both desktop and laptop.
Software is compatible with WIN98/2000/XP operating systems.
Can test various vehicles from Asian, European, American countries.
Supports a variety of automotive communication protocols including CAN bus.
On line automatic update service. Free for one year.
We update the software every week.
Two diagnostic ways: wireless and wired. Wireless distance can reach to 20 meters.
Data analysis supports full election and optional two modes.
Dynamic data supports recording and playing back function.

Technical Parameters:

Work voltage: 12V
Power: 5W
Ambient temperature:-20�C-40�C
Relative humidity: Less than 90%

PC Requirement:

Operating system: WIN98/2000/XP
CPU: 2G
Internal memory: 512M

Recommend Reason:

Compatible with your PC-Cut hardware cost
High price-performance ratio
Anti copy function��security
Strong function��recording and playing back

ADS-1 Packing List:

1.Diagnostic Adaptor:
changan& SUZUKI
BENZ-38
UNIVERSAL-3
BMW-20
MITSUBISH-12+16
NISSAN-14
VERSATILE -16
CRYSLER-6

2.Communication Equipments:
GEELY-17
Smart box
KIA-20
Min box
TOYOTA –17R

3.Cables:
GM-12
Main Cable
HONDA-3
Power Supply cable
OBDII-16
Cigarette cable
CANBUS
USB Cable
TOYOTA-17F
Battery Clamp
Fiat & Daihatsu

4.Accessories:
AUDI-2+2
WARRANTY CARD
Citroen-2
USB EXTEND LINE
COMPUTER (FOR ADS-1X)
CD-ROM

Related Pictures:

New FVDI ABRITES Commander For VAG VW Audi Seat Skoda (V21)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:44:45 +0800

ABRITES Commander For VAG - VW, Audi, Seat, Skoda FVDI VAG(V21), it supports Multi-Language and with latest software

FVDI ABRITES Commander For VAG VW Audi Seat Skoda

Highlights:

1. Software Version: 21

2. Supported Languages: English, Germany, Spanish, French, Russian, Italian, Danish, Czech, Chinese, Bulgarian
3. Buy This VAG VW FVDI, you can get Hyundai/Kia/Tag Key Tool software and VVDI ImmoPlus V13.6 Free

FVDI Commander for VAG is a Windows PC based diagnostic software for the vehicles from VAG. With the help of this tool you can perform operations with vehicles from the VAG group, which are in most cases unsupported from the producer diagnostic testers. The ABRITES Commander for VAG provides you also a full diagnostic capabilities for VAG-vehicles.

FVDI Commander for VAG Features:

1. Reading Pin code by OBDII

2. Programming keys by OBDII. Preparation of dealer's keys.

3. Mileage recalibration by OBDII

4. Clearing crash data DTCs by OBDII

5. Read/Program flash memory of engine control units by OBDII. Options for resetting the number of flashing attempts.

6. Exchange speed limit of MMI-TV system

7. Coding calculator - supported short/long coding

8. Synchronization/Adaptation KESSY and ELV

FVDI Commander for VAG Standard Diagnostic Functions:

1. Connect to the device using KWP2000 over TP2.0, KWP2000 over TP1.6, UDS over ISO transport protocol (CAN), KWP1281 or KWP2000 over K-Line

2. For all electronic control units reading identification data

3. For all electronic control units read error (DTCs)

4. For all electronic control units clear error (DTCs)

5. Output tests

6. Control unit coding

7. Scan all units

8. Broadcast requests

9. Measured values

10. Adaptation

FVDI Commander for VAG Special Functions:

Instrument CAN

- Mileage recalibration by OBDII - VW Golf 6, VW Multivan 2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco, VW Polo

2009+, VW Bora 2010+, VW Jetta 2010+, VW Passat CC, VW Amarok, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia

2009+, Skoda Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+, Seat Exeo 2009+, Seat Ibiza 2009+, ...

- Added support for VDO Instrument Cluster 2006+

- Read/Program memory of instrument cluster immobilizer

- Reading security access code of the IMMOBILIZER

- Reading security code (PIN) and component protection by OBDII - VW CRAFTER

- Read/Write immobilizer data in VDO dashboards with NEC microcontroller (2009+) by OBDII

- Read/Write immobilizer related data

EZS - Kessy (Q7/A6/Allroad)

- With this function you can prepare dealer key/learn dealer key

- Read/Write eeprom from EZS - Kessy (Q7/A6/Allroad)

Instrument K-Line

- With this function you can establish disgnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)

- You can Read/Change odometer value

- Read PIN code

- Read/Write eeprom

- Read ROM/Flash from the Instrument cluster

- Automatic removing of "DEF error" for Audi A4

Instrument cluster BOSCH RB8

Engine Control Unit

- Read EDC17/MED17 flash memory

- Read/Write of flash memory (EDC15, EDC16 all types Read/Write Flash memory via OBDII (K and CAN). Calculation of

checksums while programming, ME7.1.1, MED9.x, ME7.5)

- Read/Write flash counters (EDC16)

- Read/Write eeprom (VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)

- Extracting Security access code / PIN (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)

- Extracting Component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)

- Enable/Disable immobilizer (EDC15, ME7.x, EDC16)

- Mileage recalibration (EDC15, EDC16)

Component Protection Manager

- Component Protection Manager - adaptation of spare part (used electronic control units) and programming component

protection of Audi A6/Q7/Allroad/A4/A5/Q5

ECU adaptation by OBDII

- ECU adaptation by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30

BCM2 - Audi A4/A5/Q5 2007+ key programming

- The special function makes possible to learn keys for A4/A5/Q5 2007+ vehicles with the BCM2 immobilizer

Steering Lock adaptation

- The window "Steering lock adaptation" can be used for adaptation of steering lock control module to the VW Touareg/VW

Phaeton/Porsche Cayenne/Bentley Continental/Audi A8.

This adaptation can be by CAN TP2.0 or K-KWP2000

TV activation ED1/ED2

- Using this special function you can change speed limit of MMI compatible vehicles to change speed where TV becomes OFF

Key programming/adaptation

- Programming keys by OBDII (VAG with 16 bytes Component Security) - VW Crafter, Audi R8, VW Golf 6, VW Multivan

2009+, VW EOS 2009+, VW Caddy 2009+, VW Scirocco,

VW Polo 2009+, VW Bora 2010+, VW Jetta 2010+, Skoda Octavia II 2009+, Skoda Superb 2009+, Skoda Fabia 2009+, Skoda

Yeti 2009+, Seat Leon 2009+, Seat Altea 2009+,

Seat Exeo 2009+, Seat Ibiza 2009+, ... Free for owners of AN024+AN026

- UNLIMITED production of TP22/TP23/TP24/TP25 transponders from a Megamos 48. Free for all owners of AN024, ZN001

- No more precoded transponders (TA2/TA3/TA4/TA5) are used for the key-learning. Instead any Megamos 48 Crypto

transponder can be used. Free for all owners of ZN001

- Extracting of the 7th byte Component Security from a working key of the car (Megamos, Hitag2). Free for all owners of

AN024, ZN001

- LAMBORGHINI GALLARDO

- With this function you can learn key/transponder to the vehicle

Dump Tool

- With this function you can calculate security access codes, change odometer and so on from EEPROM dump from the

corresponding unit

Airbag

- Read/Write complete EEPROM of airbag control units Siemens (CAN bus - ISO15765). Audi A6/Q7/Allroad, VW Golf5...,

Skoda Octavia II ..., Seat Altea ...

- With this special function you can Read/Write EEPROM memory of the airbag module

- Clear the crash data of the airbag module

Custom Read/Write

- Using this application you can read/program memory in some electronic control unit

PIN Convertor

Service interval

- Using this function you can perform reset of the service reminder, reset of the service interval parameters or change

service interval options

- Service intervals reset for the models with UDS diagnostics

Remote control adaptation

- Using this application, you can learn remote controls

Navigation

- Using this application, you can enable/disable the "Eject" button of the "Navigation" system

Cruise control system

- Using this application, you can activate/deactivate a cruise control system and change the related

steering wheel electronics( SWE) configuration if SWE unit is available

Brake Pads Change

- Using this application, you can "Open rear parking brake for pad change", "Close rear parking

brake", perform "Parking brake function test"

Technical Specification:

1. K-line ISO 9141 (100 mA) multiplexed to 24 different pins of the diagnostic connector

2. ISO14230 compliant

3. Single wire CAN bus multiplexed to different pins of diagnostic connector

4. Dual wire low speed CAN bus multiplexed to different pins of diagnostic connector

5. Dual wire high speed CAN bus multiplexed to different pins of diagnostic connector

6. CAN bus GMLAN, ISO14229, ISO15765, J1939, ISO22901 compliant

7. USB interface to the PC

8. Supply voltage 8..30V DC

9. OBDII cable

10. Updatable firmware

11.Commander for VAG - VW, Audi, Seat, Skoda

2013 MINI VCI FOR TOYOTA TIS Techstream V8.10.021 Single Cable

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:52:54 +0800

Single cable for MINI VCI FOR TOYOTA is cost-effective, the price of product is only one-third of similar foreign products

Single Cable for MINI VCI FOR TOYOTA TIS Techstream V8.10.021

This package do not contain Toyota 22pin connector, so it can only do Toyota 16pin cars.

1. Feature

Support Toyota TIS OEM diagnostic software
High performance with ARM cpu inside.
High reliability of products using SMD chip, and certified by CE and FCC.
Support all the diagnostic communication protocols needed for Toyota (since 1996).
Upgrade the firmware via the Internet to improve product.

2. Supported Protocols

K-Line ISO 9141/KWP 2000 ISO 14230-4/SAE J1850 PWM/SAE J1850 VPW/CAN 2.0B ISO 11898 /CAN ISO 15765-4

Package List:

1pc x MINI VCI 16Pin Cable
1pc x CD Driver

VAG Pin Reader and Programmer Free Shipping

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:56:38 +0800

Kombiinstrument / Immo box reader and programmer, VAG kilometers programm and change via OBD II connector! You can choose USB or COM 1 port connection to OBD II port! Works on any computer with Windows installed.

VAG PIN READER AND PROGRAMMER

Car Models Covered By Pin Reader Software:

VW GOLF IV VDO 1998-2005
VW GOLF IV Bosch/MotorMeter petrol/diesel ECU – 2001-2005
VW GOLF IV, BORA/JETTA, PASSAT Motor Meter - 1997-2000
VW PASSAT VDO B4, B5 & B6 1998-2005
VW PASSAT Bosch/MotorMeter petrol/diesel – 2001-2005
VW BORA - JETTA VDO 1998-2005
VW BORA - JETTA Bosch/MotorMeter petrol/diesel – 2001-2005
VW POLO VDO 2002-2006
VW BEETLE Magnetti Mareli 1998-2005

SKODA OCTAVIA Motor Meter - 1997-2005

AUDI A3, A4, A6, TT 2000+ & TT USA Magnetti Mareli
AUDI A3 VDO 1997-2003
AUDI A4 VDO 1998-2005
AUDI A4 Bosch/MotorMeter dashboard petrol/diesel 2001-2005
AUDI A4, A6, A8 External Immo Box (system 1) 1995-1998
SKODA BIA VDO 2000-2006
SKODA OCTAVIA VDO 1997-2005
SKODA OCTAVIA Bosch/MotorMeter petrol/diesel ECU – 2001-2005
KIA/HUYNDAI – 6 digits pin code calculator from VIN number for models after2000

ACI Scanner Auto Communication Interface

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 02:59:52 +0800

ACI Auto Communication Interface is 100% compatible with AUTO ENGIUITY OE-LEVEL software, ACI scan tool supports all Enhanced Options.

ACI Scanner Auto Communication Interface

Attention:
Supported Languages: English, Germany, Spanish
Pls don't update it by yourself, otherwise we can not repair the device in warranty.

Description:

OE-Level Coverage (Enhanced Interfaces)
Independent service shops and vehicle tuners require more information than what OBDII can provide to do their job effectively. Since the OBDII standard covers only emissions-related powertrain systems and sensors, there is more information you won't be able to see with a generic OBDII scan tool. With our enhanced interface options, you can get factory tool-like capabilities; allowing you to access hundreds of systems (ABS,airbags, instrument cluster, etc.), sensors, and system/component-level bi-directional controls so you can do your job faster and with a greater degree of accuracy.

ACI supports non-OBDII and European models. For example, due to their excessive vehicular weight trucks like the Ford Super Duty, Chevy Duramax, and Dodge are not required to be OBDII compliant. But with our enhanced interface options you can now access the diagnostics capabilities of these vehicles.

Functions:

1. ACI Scan Tool is a professional PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. ACI Scan Tool allows you to read the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection system test results to quickly determine what service the vehicle requires.

2. Professional Diagnostics
In the professional repair business getting as much coverage as you can is important to effectively and quickly service any vehicle. We offer enhanced coverage options for 43 car brands: Ford/Lincoln/Mercury, GM-family, Chrysler-family Toyota/Lexus/Scion, Mazda,Nissan/Infiniti, BMW/MINI, Land Rover, Honda(Acura),Subaru, Mitsubishi, Isuzu, Porsche,Mercedes, Hyundai/Kia, Jaguar, and Audi/VW.

3. Not Simple Code Reader
So you read your vehicle's trouble codes, now what? Reading the trouble codes from your vehicle is easy. But without live data and bi-directional controls, you may not have enough information to properly perform the repair. Don't waste your time or money with simple code readers or hand-held scanners. ACI OBD2 scan tool can not only read your codes,but it can also show you live data, actuate components, and run system tests. With complete coverage, you can get the job done right the first time and prevent dreaded"comeback".

4. NA Emissions and European MOT
You may have known that almost all states are using OBD2-based emission testing for all 1996 and newer passenger vehicles? Now with the 2010 legislation, even the 8500 -10000lb trucks are required to be OBD2 complaint. If you have a Check Engine or Service Engine Soon indicator illuminated, or a specific inspection system monitor test fails, your vehicle will fail its emissions test. With ACI OBD2 scan tool you can inspect your vehicle’s compliance before you wait in line and pay for the test.

5. Tuning Your Vehicle
Read live sensors such as wide-band O2 sensors, fuel adaptation, MAF, ignition timing advance, and lambda readings. If your vehicle supports wide-band O2 sensors, Scan Tool can show you real-time air/fuel mixtures. Finally, data log them all in TXT, CSV, and XML formats with 1ms sampling accuracy.

6. Performance Analyzer
Don't buy into claims of increased horsepower or added torque; you can verify whether that new, expensive part really works. Do your own dynamometer and acceleration testing at your own convenience and without having to rent expensive dynamometer time.

For our European customers, our enhanced interface options also support Audi/VW, BMW,Chrysler/Dodge, Ford, Jaguar, Mercedes, and Toyota/Lexus diesel engines and the European-specific models.

ACI Enhanced Options:

Ford (EI01) 2000-2010
GM (EI02) 2000-2010
Toyota/Scion/Lexus (EI03) 2000-2010
Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010
Mazda (EI05) 1996-2010
Hyundai and Kia (EI09) 1998-2010
Nissan and Infiniti (EI06) 2000-2010
BMW and MINI (EI07) 1996-2010
Honda and Acura (EI08) 1996-2010
Land Rover (EI10) 2002-2010
Jaguar (EI11) 2000-2010
Subaru (EI12) 1999-2010
Porsche (EI13) 1997-2010
Isuzu (EI14) 1996-2010
Mitsubishi (EI15) 1996-2010
Audi / VW (EI16) 1996-2010
Mercedes (EI17) 1998-2010

1. Enhanced interface for Ford (EI01) 1995-2010

Although Ford does implement the largest subset of the OBDII standard, the typical vehicle only supports 20 - 40 sensors and is limited to emissions powertrain. Using the enhanced Ford interface, a typical Ford vehicle will support 200 - 300 sensors within half a dozen systems; that's essential systems such as ABS, airbags, GEM, ICM, etc.
Our enhanced Ford interface coverage is only matched by factory tools; we have support for 4,800+ sensors selected from 94 systems. Support includes ISO, SCP, CAN, MCAN,and CAN 14229 controllers.

The Ford enhanced interface has support for Ford of Europe diesel models such as Ka,Mondo, Galaxy, Fairlane, etc. Finally, our Ford enhanced has support for non-CAN and CAN 400+ bi-directional commands and dozens of system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle--now you can take control of its operation.

System Tests:
PATS Timed Key Programming ('96 - '08)
KOEO
KOER
Power Balance (CAN-based models)
EVAP Bay Test
Service Bleed (Non-CAN support not available with ProLine currently)
Buzz Injector
Cylinder Contribution Test
Switch Test
Glow Plug Test
System Self-Test
Low - and High Speed Fan
All Outputs On/Off
Injector Coding (1.8L and 2.0L)
KAM Reset
Tire Size Programming up to 40" ('99-'03 7.3L, and '04-'07 6.0L)
IVD Initialization
Steering Angle / Yaw Rate / Acceleration Sensor Reset ('03 Explorer and Lincoln LS)
Passenger Seat ReZero
Power Seat Calibration Test
Audio Network Communication Test
Vehicle In-Motion IO Test
Front Wiper Self-Test
Rear Wiper Self-Test
Diesel Particulant Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector Adaptive Tables

2.Enhanced interface for GM (EI02) 1995-2010

Our enhanced GM interface supports 6,400+ sensors selected from the engine,transmission, body, and chassis systems. For you tuners out there, our enhanced GM interface gives you access to the Crank Variation Learned test for most vehicles. Also,with our enhanced GM coverage is support for Workhorse 04+ MY vehicles (P42 Series,W22 Series, W24 Series, W52 Series, LF72 Series, P32 Series, W18 Series, FE20 Series,W42 Series).

Our enhanced GM interface coverage is only matched by factory tools; we have support for 6,000+ sensors selected from all 68 systems. Finally, our enhanced GM has support for 2,000+ bi-directional commands and key system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle--now you can take control of its operation.

Support includes dual-wire and single-wire CAN powertrain support.
Supports Global-A Vehicles:
Buick Allure
Buick LaCrosse
Cadillac SRX
Chevrolet Camaro
Chevrolet Equinox
GMC Terrain

System Tests:
ABS Automated Bleed Routine (ProLine Connector)
Crank Variation Learn (See: GM-specific vehicle systems for engines support details.)
Injector Flow Rate Programming (CAN Based Diesels)
TDC Learn

3. Enhanced interface for Toyota/Scion/Lexus (EI03) 1995-2010

Our enhanced Toyota interface supports engine, transmission, body, and chassis systems.
System support includes the bi-directional controls and system tests such as Test Mode(Zero Point Calibration) setting for TCS / VSC systems. Additionally this support includes the Generation 1 and Generation 2 hybrids systems such as HV Battery and HV ECU. For these systems we also do support the Information Data #s reported with trouble codes.

System Tests:
Air Bleed -- Usual and Master Stroke (ABS)
ECB Utility -- ECB Invalid, Zero Down, and Linear Valve Offset Calibration (ABS)
Signal Check (Airbag, ABS, ABS CAN, EFI CAN, EHPS, EMPS, and TPWS)
Reset Memory (EFI, EFI CAN, ABS, ABS CAN)
Clear Records (EMPS and VGRS)
Zero Point Init (EMPS)
Sensitivity Check (OCC)
Inspection Mode (ABS CAN)
Test Mode -- Zero Calibration (ABS, ABS CAN, TPWS, and OCC)

4. Enhanced interface for Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010

Our enhanced Chrysler interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission system. It includes hi- and low-speed sensor support giving you more sensors and faster throughput then our competitors. This enhanced interface comes with its own hardware interface specifically designed for Chrysler SCI and CCD based controllers. By doing a stand-alone interface we can offeryou more SCI coverage then our competitors who are limited by electrical issues with generic OBD-II. Also supported is the CR2 and CR3 Sprinter ('04 - '06), Jeep Liberty Diesel ('05 - '06), diesel Cummins engines, and the Venom equipped Vipers ('08+).

SBEC/JTEC System Tests:
EGR System Test
EVAP System Monitor Service Test
Erase All DTC Fault Codes
Generate Full Field Test
Gov & 3-4 Shift Valve Test - JTEC Only
Leak Detect Pump Test
Purge Vapors Test
Reset All Adaptive Memory Fuel Cells
Reset All Non-Volatile Memory
Reset CAM/Crank Misalignment
Reset CAM, Crank, and Sync Status Record
Reset Duty Cycle Monitor
Reset Engine Running Time Record
Reset Fuel Shut-off Record
Reset Intake Airflow Control Stepper Motor Position
Reset Trip Information
Set Sync Signal - JTEC Only
Set Minimum Throttle Position to Maximum
Torque Converter Clutch Test - JTEC Only
VPW Based System Tests:
ABS Bleed Brakes (EBC325, Mk20e, and Mk25e)
Tire Size Programming
Transmission Rear/Front Wheel Brake Torque Test
Transmission Pump Test
Transmission Quick Learn
Transmission TCC Break-In Test
Transmission Front Wheel Pinion Factor

NGC System Tests:
Injector Kill Test
NVLD Force Monitor Test
Purge Vapor Tests
Reset all On-Board Control Units
Report Part Number
Report Reflash Program Counter
CAN Based System Tests:
ABS Brake Bleed

Cylinder Performance Test
EATX Quick Learn
IMA Injector Programming
Injector Quantity Adjustment
LDP Forced Monitor Test
OCM Verification Test
Tire Size Programming

5. Enhanced interface for Mazda (EI05) 1996-2010

Our enhanced Mazda interface supports hundreds of sensors selected from the engine,transmission, body, and chassis systems. Support includes the CAN systems such as ABS and Tire Pressure Monitor systems.

System Tests:
IVD Initialization (Lateral Acceleration and Yaw Rate Reset)
Self-Test (RCM and GEM)
KOEO
KOER
Passenger Weight ReZero

6. Enhanced interface for Nissan and Infiniti (EI06) 2000-2010

Our enhanced Nissan interface supports code retrieval/resetting, sensors, and actuations from the engine, BCM, transmission, ABS, airbags, 4WD systems, and CAN systems.Coverage includes the Work Support configuration commands such as Target Idle Ignition Adjustment; with it you can permanently advance your ignition timing to gain few extra HP.Trouble code retrieval includes the NATS 5.0 system and the detailed status byte support.
Finally, we seamless integrate CAN and non-CAN systems so that you won't have to worry about switching hardware to retrieve all the troubles codes from each module.

System Tests:
Self-Diagnostic (Airbag)
ECU Part Number (Airbag)
Diagnostics Record (Airbag)
Reset ECU (Powertrain)
Work Support/Configuration Functions (Some 01+ and Most '03+)
Target Idle Ignition Adjustment
Target Idle RPM Adjustment
Idle Air Volume Learn
Self-Learning Control

CAN Module Configurations:
Door Lock Unlock Set
Anti-Lock Out Set
Set IL Door Unlock
Room Lamp Off Time Set
Room Lamp On Time Set
Keyless Entry Horn Chirp Set
Keyless Entry Hazard Lamp Set
Keyless Entry Multi-Answer Back Set
Keyless Entry Auto Lock Set
Keyless Entry Panic Alarm Set
Keyless Entry Trunk Open Set
Keyless Entry Power Window Down Set
Head Lamp Battery Saver Set
Head Lamp Custom Light Setting
Head Lamp Illumination Delay Set
Wiper Speed Setting
Security Alarm Set
Theft Alarm Trigger Erase

7. Enhanced interface for BMW and MINI (EI07)1996-2010

Our enhanced BMW interface supports thousands of sensors and bi-directional controls selected from 190+ controllers such as engine (DME), transmission (EGS), ABS, airbags,and other body and chassis systems. With our enhanced BMW, we support translating BMW FC codes into OBDII DTCs for all engine and transmission controllers. Also,supported is such status information as the fault frequency and fault conditions.

Model Coverage:
1 Series E8X (2004-2009)
3 Series E36/E46/E9X (1996-2009)
5 Series E39/E60 (1997-2009)
6 Series E62/E63 (2004-2009)
7 Series E38/E65/E66 (1996-2009)
X3 E83 (2004-2009)
X5 E53/E70 (1999-2009)
X6 E71 (2008-2009)
M3 E36/E46/E9X (1996-2009)
M5 E39/E60 (1999-2009)
M6 E62 (2004-2009)
MINI R50/R51/R53/R55/R56/R57 (2001-2009)
Z3 (1998-2002) (1.9L, 2.0L, 2.2L, 2.3L, 2.5L, 2.8L, and 3.0L)
Z4 E85/E86 (2003-2009)
Z8 (1999-2003)

System Tests:
Determine All Systems Present and Operating
Display Service and Inspection Information
Display Coding Information
Self-Test (Safety and Information)
Steering Angle Adjust (MK20, MK60, DSC 8 [E46, E90, E83, and MINI all models])

Lateral Acceleration and Pressure Adjust (MK60 [E46 non-M models and MINI])
ABS Bleed (MK60 [on E46 '03+, E85/E86, and MINI models])

Service Functions:
Reset Airbag Light
Register Replacement Battery (D80 and V80)
Reset Oil Service Light (for all 9/2000+ models)
Reset Service Interval Distance and Time (for all 9/2000+ models)
Reset Conditional Based Service (E6X and E9X models)
Reset DME, EGS, and RLS Adaptations
Clear and Set Transport and Sleep Modes
Teach In Clutch Slipping, Teach In Clutch Characteristic Curve, Teach Clutch Values,
and Longitudinal Acceleration Sensor Offset (SMG II)

8. Enhanced interface for Honda and Acura (EI08) 1996-2010

Our enhanced Honda interface supports hundreds of sensors and bi-directional controls selected from the engine (PGM), transmission (TCM), ABS, and airbag systems.

System Tests:
ADS Damper Forced Operation
ADS Jack-Up Stroke Calibration
ATTS Lateral G And Yaw Rate Calibration
ATTS Steering Angle Calibration
Calibrates All Sensor (ABS Type 1 & 4)
Crank Position Sensor Notch Learn
DBW Throttle Carbon Clogging Reset
DBW Throttle Carbon Clogging Status
Engine Oil Replacement Reset
OPDS Initialization
OPDS Sensor Adjustment
Reset Wheel Speed Pulse Counters (ABS Type 1 & 4)
Resolver Zero-Position Offset Calibration
SWS Initialization

9. Enhanced interface for Hyundai and Kia (EI09) 1996-2010

Our enhanced Hyundai and Kia interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission systems. Coverage includes the European counterparts such as the Azera, Enterprise, Picanto, Pride, etc. Finally, we support retrieving the ECM information block to view Boot Software Number, ECU Hardware Number, Programming Date, etc.

System Tests:
EVAP Leak Test (Siemens 655 [Rev 17, 18, 19], 670 [Rev 8], Bosch COM 1.1)
Reset Adaptions
PODS Reset

Read Block Information
Steering Angle Calibration (ABS/ES 95660 [Rev 23 and 32])

10. Enhanced interface for Land Rover (EI10) 2002-2010

Our enhanced Land Rover interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the Freelander (2002-2005), New Range Rover (2002.5-2010), LR2 (2007-2010),LR3 (2004-2010) LR4 (2010).

Advanced features besting even the factory solutions:
View more then 16 sensors at one time
Faster connections
More PIDs available on most controllers
Steering Lock Column Module fully integrated
Service Functions:
Display Service and Inspection Information
Display Coding Information
Reset Service Interval Distance and Time (for '00+ BMW-based models)
Reset DME and EGS Adaptions

11. Enhanced interface for Jaguar (EI11) 1995-2010

Our enhanced Jaguar interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the XK, X Type, S Type, XJ, and XF models. Additionally, coverage includes the late model medium speed CAN (MCAN) controllers such as HVAC, Audio, Keyless Vehicle,Park Aid, Side Object Detection Control, Central Junction, etc.

Advanced features besting even the factory solutions:
View more then 16 sensors at one time
More intuitive and powerful user-interface
OBD-II functionality integrated with Jaguar-specific functionality
Faster connections
More PIDs available on most controllers
Service Functions:
Injector Coding (2.0L)
Brake Sensor Setup
Display Last Alarm Activations (SLM and GEM)
Display Fuel Adaptation Tables
Fuel Adaptation Monitor
Electronic Parking Brake Release To Service
Front And/Or Rear Light Calibration (ADHLS and HCM)
Reset TCM Adaptations (most models)
Yaw and Lateral Accelerometer Calibration
Reset ABS Configurations
System Self Test (SType Only GEM, REM, DDM, PDM)

EVAP Leak Test (some ECM variations are not currently supported)
Enhanced interface for Subaru (EI12) 1999-2009
Our enhanced Subaru interface supports hundreds of sensors selected from the engine,
transmission, and late model ABS systems.

Permanent Functions:
Retard Ignition
Idle RPM Adjustments (with AC and without AC)

12. Enhanced interface for Porsche (EI13) 1994-2010

Our enhanced Porsche interface supports live data, bi-directional actuations, system-level tests, and trouble code retrieval and clearing from 60+ systems. Coverage includes the popular 911 (1994-2009), Boxster (1997-2009), Cayman (2006-2009), Carrera GT(2005-2006), Cayenne (2003-2009). With our enhanced Porsche, we support live data and drive links from more than 50+ controllers. If live data isn't enough, we have component-level actuations so you can test a component on your own terms instead of recreating the conditions for actuation. Finally, with Vehicle Data support (i.e., Ignition Ranges counters) you can see the state of your vehicle prior to repair or purchase.

Advanced features besting even the factory solutions:
More intuitive and powerful user-interface
OBD-II functionality integrated with Porsche-specific functionality
VIN-based model decoding for rapid vehicle identification
Plug-n-Play hardware requiring no device drivers
Trouble code status byte decoding to assist in determining the nature of the fault
English translations of fault codes

Service Functions:
Event Memory (Airbag)
Operating Hours (Airbag)
Calibration (HBA and Air Conditioning)
Events and Erase Events (Instrument Cluster)
Events, Erase Events, and Reset (Instrument Cluster CAN)
Display Module Information
Display Vehicle Data (986/987/996/997)

13. Enhanced interface for Isuzu (EI14) 1996-2010

Our enhanced Isuzu interface supports hundreds of sensors selected from the engine,transmission, airbag, and ABS systems.

14.Enhanced interface for Mitsubishi (EI15) 1996-2009

Our enhanced Mitsubishi interface supports hundreds of sensors selected from the MFI,ABS, AT, Immobilizer, Advanced features besting even the factory

solutions:
Advanced features besting even the factory solutions:
More intuitive and powerful user-interface

Faster updates
View more then 8 sensors are once
Special Functions:
ECU Information (All CAN controllers)
EVAP Leak Test (MFI CAN)
EVAP Leak Monitor (MFI E200, E400, E500, E600, 1400, and 1600 Series)
Gas Emissions Test Mode and Sensitivity Check (ABS CAN)
Reset Learned Values (MFI CAN)
Zero Calibration (Some OCM CAN)
SAS Initialization (SAS CAN)
Steering Angle Initialization and Operation Test (ACD CAN)
Air Bleed and Lateral G Sensor Initialization (ACD CAN)
Service Interval Reset (Meter CAN)
Tire Pressure Sensor ID Check (TPMS CAN (Front Only))

15. Enhanced interface for Audi/VW (EI16) 1996-2010

Our enhanced Audi/VW interface supports hundreds of sensors selected from the engine,transmission, ABS, airbag, and dozens of other systems. To help facilitate ease-of-use for this interface, we've allowed users to select as many sensors as they want. We also do not require that certain sensor groups to be selected in specific orders. We've also extended our support by allowing module coverage to be externally added by way of the Audi Information File (AIF). These files can be generated during a network test or during a module sensor mapping test and help extend the over all coverage of the interface untill such coverage can be built into the software. Many of the features that Audi/VW features offer are not consistent with other manufactures (i.e. Ford, GM) as they do not offer
component-level actuations and the sensors vary based on installed modules. Like most aftermarket Audi/VW tools, some of the sensor descriptions are missing, but data values can still be retrieved with basic descriptions. It is therefore strongly recommend to use a service manual alongside our tool while working on these vehicles.

Advanced features:
Adaptation
ADC Channels
Basic Settings
Coding II/Login (7-digit PIN/SKC Not Supported)
Gateway List (CAN)
Login
Module Information
Module Recoding
Long Coding
Soft Coding
Module Sensor Mapping
Network Test
Output Tests (Automatic and Specific)

Optical Bus Diagnostics (CAN)
SRI Reset
Transport Active/Deactive Mode (CAN)

16. Enhanced interface for Mercedes (EI17) 1998-2010

Our enhanced Mercedes interface supports thousands of sensors and hundreds of bi-directional controls for systems such as DME, EGS, ABS, AAC, BAS, SRS, WSS, EWS,CGW, ICM, DAS, MRM, LCP, UCP, OCP, SAM, and dozens more body and chassis controllers. Support includes systems on both the 16pin OBDII and 38pin interfaces.Live data, bi-directional controls, and trouble code retrieval for the popular M and GL Class (163 / 164), SLK Class (170 / 171), C Class (202 / 203 / 204), CLK Class (208 / 209),E Class (210 / 211), CL Class (215 / 216), CLS Class (219), S Class (220 / 221), SL Class(230), B Class (245), R Class (251), G Class (463), and V Class(Viano/Sprinter). Trouble code retrieval only for DAS 3 equipped S Class (140) models currently.

Advanced Features:
Display Adaptation Values (DME 2.0)
Display ECU Information
Reporting Status Byte and SubType codes
VIN model decoding
Support for D- and N-Codes
Read and Clear Fault Codes/Events

Service Functions:
Power Window Denormalization for DCM aand LCP controllers
Reset ECU
SBC Deactivation and activation
Reset Sensor and Mixture Adaptation (ME2.8)
Reset Adaptation Values, Cold Start Adaptation Values, and Activate Fuel Pump (ME9.7)
Learn Throttle Valve Stop, Teach-In Ethanol Portion, and Reset Ethanol Teach-In
Processes (ME9.7)
Reset Quantity Mean Value Adaptation Data (CDI2 - CDI5)
Reset Transmission Adaptations (EGS52, EGS53, and VGS2)
Reset Service Interval ('03 and earlier with FSS only)
Reset Oil Service ('03 and earlier with FSS only)
Rodeo, Pitch, Roll, and Move Towards Calibrated Level functions (ABC and ABC230)

Renault CAN Clip V133 Latest Renault Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:10:03 +0800

Renault CAN Clip V133 is designed to diagnose Renault cars models including automatically test all Renault models' computers, reporgramming, airbag test and other functions.

Renault Can Clip Function:

1. See all the information relating to the vehicle
2. Computer test
3. Automatic test of all computers
4. Airbag test
5. Ccantool (OBD tests)
6. Base Doc (access to Technical Notes)
7. Physical measurements
8. Antipollution
9. Multimeter

Renault Can Clip Crack Steps

1. After finish Installation, DO NOT run your CLiP!!!
2. Copy the RSRwin.ext to C:CLIP_X91LibApplication
3. Then run your CLiP, choose "Register me now" and in the next Windows,please select "NO"!
4. Use this Key for Registration: 333DEF-111DEF-111DEF-222DEF-221DEF-000DEF

Package List:

1pc x Renault can clip interface
1pc x Renault 20pin cable
1pc x Renault 16pin cable
1pc x CD(V133 version)

VAG DASH COM V1.65

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:13:07 +0800

VAG DASH COM is the unique advanced diagnostic tool to read out the internal memory of your Instrument cluster.You can display the login code, recalibrate the odometer and rewrite the EEprom data in case of changing an instrument.

VAG Dash COM

Support Cars 1998-2004 Such as:

Golf IV,Passat,Polo 6N,Eurovan T4,Eurovan T5,Skoda,Seat,Audi A3 / A2 / A6,Audi A4 till 2000
All those models with communication via K-line

Software Display:

A4 RB8 Authorization for Micronas OBD TOOL (CDC32XX) for Volkswagen

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:25:05 +0800

A4 RB8 Authorization for Micronas CDC32XX Cable. Those customer who purchase VAG KM IMMO TOOL cable can have this authorization for free.

A4 RB8 Authorization for Micronas CDC32XX Cable

What does this update module used for?

A4 RB8 update module can be used with Micronas CDC32XX Cable. By update with A4 RB8 Update Module, you can get authorization for Micronas CDC32XX Cable.

How to get this update?

After you place an order on our website and scuccessfuly checkout, please provide us your cable's serial number. We will open A4 RB8 authorization for your cable. After open, you can test it on A4 RB8 dashboard. If you have any problems, you can contact us at any time, our engineer can online check for you.

No need shipping. Fast and safe.

VAG CAN Commander 5.1

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:27:47 +0800

VAG CAN Commander 5.1

Description:

Compatible with certain models of VW, Audi, Seat, and Skoda

Connect your computer to your car

USB to OBDII - CANBUS connection

Displays live data from your vehicle

Displays diagnostic trouble codes (DTCs) and definitions on screen

Reads and clears all generic DTCs and some manufacturer specific DTCs

Read security access code of immobilizer, eeprom and flash memory of instrument cluster

Plug and play: No need for additional batteries, cables, connectors, or converters

Support Vehicles:

2003+ VW Touran (1T chassis)

2004+ VW Golf (1K chassis)

2004+ VW Caddy (2K chassis)

2004+ Audi A3 (8P chassis)

2004+ Seat Altea (5P chassis) and Altea XL

2004+ Skoda Octavia (1Z chassis)

2005+ Seat Toledo (5P chassis)

2005+ Golf Plus (5M chassis) - All Golf-5 platform cars (A5 platform)

2005+ Seat Leon (1P chassis)

2005+ Jetta (1K chassis)

2006+ Eos (1F chassis)

2003+ Audi A8 and A8L (D3 platform, 4E chassis)

2005+ Audi A6 (C6 platform, 4F chassis)

2005+ Audi A4 (B7 platform) (some control modules)

2005+ VW Passat (B6 Platform, 3C chassis)

2006+ Audi Q7 (4L chassis)

2007+ Audi R8 (42 chassis)

2007+ Audi TT (8J chassis)

2005+ Porsche Cayenne

Skoda: Roomster, Scout

Specification:

1.Operating Software Compatibility: Windows 98SE, ME, 2000, XP

2.OBDII Plug: 16-pin (Male)

3.USB: 2.0 and backward compatible

Package List:

1pc x USB VAG Diagnostic Cable C 5.1 OBDII

1pc x CD with software

VAG Key Login

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:30:12 +0800

VAG Key Login is used to determine the login code in many VAG-no speedometer, Engine ECUs and Immobilizer boxen.The integrated software Schüsselanlernprozedur make this the perfect tool for the key service.

VAG Key Login

Description:

Included are the special OBD connection interface, USB cable and the software on CD.

The Following control and tachometer options are supported:

VDO speedometer VW / Audi 1998-2005 (with Seat / Skoda partly until 2006)
Motometertachos VW 1998-2004 (Golf, Passat)
Magneti Marelli M73 tachometers 1998-2001 (eg, TT, Beetle)
EDC15 VM 2000-2004 (eg T4, Golf4, Passat 3BG with distributor injection pump)
EDC15 P + 2000-2004 (all PumpeDüse, Golf4, Passat, A4, A6)
ME 7.5 (eg, 1.8T, TT, V5)
ME 7.1.1 (eg, R32, Audi V6)
Temic IMMO the boxes of the LT’s to the Year 2005
Most models of the white boxes Audi 12polig 1994-1998
6 pin boxes VW 1994-1998 (only with key semiskilled readable)

Original X-100+ X100 Plus Auto Key Programmer

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:35:20 +0800

X-100+ Auto Key Programmer is a handheld device for programming keys in immobilizer units on vehicles. This scan tool has a simple and robust design, to make your vehicle service experience much easier!

X-100+ Auto Key Programmer

The Dealer Code is 860010A1

X-100 Features:

1.New keysprogramming
2.Reads keys from immobilizer's memory
3.New immobilizerprogramming
4.New ECUprogramming
5.New mechanical key number programming
6.Vehicle Identification Number programming
7.Reset ECM & reset immobilizer
8.Easy to operate by the guided menu programming
9.New remote controller programming
10.With full and strong database for the most important vehicle makes
11.Upgradeable via web-based download

X-100 Vehicle Coverage:

Asia: Toyota, Lexus, Honda, Acura, Mazda, Nissan, Infiniti, Mitsubishi, Subaru, Suzuki, Kia, Hyundai, Daewoo, SSANGYONG, Proton, QNLotus etc

Europe: Audi, VW, Skoda, Seat, Porsche, Opel, Citroen, Peugeot, Jaguar, Landrover, Lincoln, Renault etc

America: GM, Cadillac, Buick, Chrysler, Ford etc

China: Great Wall, Chery, Brilliance-auto, Geely, LIFAN, HAFEI, CHANGAN, LANDWIND, BYD, Changan, Changfeng, Changhe, BYD, HNMazda, Huapu, JAC, LiuZhou, Lufeng, Roewe, SQYL, ZZMazda, ZZNissan etc

X-100 Packing List:

1. X-100+ main unit
2. ObdII-16 connector
3. Honda-3 connector
4. Hyundai/Kia-10 connector
5. Kia-20 connector
6. Main Cable
7. TF Card
8. TF Card Reader

BMW AK90 Key Programmer AK90+ for All BMW EWS Newest Version V3.19

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:40:21 +0800

Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all EWS key information from 1995-2005.
Newest version:V3.19

BMW AK90 Key Programmer for all BMW EWS

Software Version: 3.19

BMW AK90 V3.19 Software Free Download

AK90 Description:

AK90 BMW KEY-PROG increased by 1995-2009 in all BMW EWS read the key information functions;improved some of the EWS to read and write speed. This product safe and effective, is the key to match the best tool for BMW.

AK90 Functions:

1. Directly reading data dumps from MCU which marked 1D47J , 2D47J , 0D46J ,2L86D without removing MCU from circuit board , easy to do yourself.
2. With the help of software you can renew , lock or unlock keys as well.
3. Programming original chips "EML 10030A" for making keys .
4. Identifying keys for all EWS and CAS , showing VIN , key No. It can change VIN, can change mileage in ews.

Package List:

1pc x AK90 Host
1pc x AK90 10 Pin Cable
1pc x AK90-Chip data to read specific seat
1pc x AK90 V3.19 software CD-ROM
1pc x AK90 USB communication cable

FVDI BMW ABRITES Commander For BMW and MINI (V10.3)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:43:46 +0800

ABRITES Commander For Bmw and MINI FVDI(V10.3), buy this set, we will send you Toyota, Lexus, Hyundai, Kia and Tag key tool software for free.

ABRITES Commander For BMW and MINI FVDI

BMW FVDI Features:

1. Software Version: 10.3

2. Language: English Only

BMW FVDI Description

ABRITES Commander for BMW is a PC - Windows based diagnostic software for dealer level access to the vehicle (identification, trouble codes and so...), mileage recalibration, key programming, programming vehicle order. Tool can access CAS1, CAS2, CAS3 and CAS3+ by OBDII independent from the firmware of the CAS. Also you can perform unusual for remaining diagnostic tools operations with the electronic modules inside of the vehicle like programming Vehicle Order and Coding of electronic control units. Access to the EEPROM memory of the units in the vehicle.

BMW FVDI Covers Vehicles

BMW series starting from E36 up to latest models F series (F01,F10,F20,F25 and so...).

BMW FVDI Functions Included in The Base Package (FVDI Interface)

1. Identification (VIN, mileage, production data)

2. Read and clear diagnostic trouble codes (current, history and shadow)

3. Added DTCs in 17 DTC conditions information (Odometer value, Timestamp, full engine status report for EDC17)

4. Some DTCs (mostly that of F series) are given detailed documentation of what caused the problem and how the problem should be handled

5. Manager of service intervals, reset service reminders (CBS)

6. Measured values/live data

7. Read and Program Engine Control Unit flash memory for tuning purposes by OBDII

8. Entering and leaving from logistic mode of the modules in the vehicle

9. Synchronization DME/DDE and EWS/CAS, CAS and ELV

10. Enable / Disable of the keys

11. Enable / Disable of TV function for E3x,E46,E5x,E83,E85,E86 (for the next bodies available via unit coding)

12. Ability for diagnostic on internal CAN buses

13. Read / Program mileage from the IKE, LCM, EWS, ECU, ABS, VTG, EGS (please refer coverage list)

14. Displaying KEY CUTTING code (mechanical code) stored in CAS modules

BMW FVDI Special Functions:

1. Service intervals/CBS - ability for programming of service counters by OBDII

2. Programming flash memory of all electronic control units by OBDII (can be used directly databases released from BMW)

3. Programming Vehicle Order data (you can add new units to configuration of the vehicle) - E body

4. Coding (configuration) of each electronic control unit in the vehicle - E body

5. Programming identification of the modules in the vehicle

6. Programming User Information Fields in the electronic modules

7. Read / Write of memory of the electronic control modules

8. Program mileage stored in CAS1, CAS2 and CAS3 by OBDII

9. Program keys by OBDII - CAS1, CAS2 and CAS3 systems - support latest versions CAS3 updated in 2011 year

10. Key programming for CAS3+ with latest firmware version (ISTA-P 45)

11. Preparing a keys by dump for BMW models with CAS4 - newest BMW 1, 5, 5 GT, 6, 7, X3 series ( body Fxx)

12. Read / Write eeprom from CAS1 via OBDII

13. Read / Write eeprom data from CAS2/CAS3 via dash connector or cas-connector

14. Read / Program mileage stored in different electronic control units by OBDII like ECU, EGS, SGM, JBBF and many others

15. Extracting and programming synchronization code between ECU and CAS by OBDII

16. Ability to works together with transponder programmer

Not Granted for All Type of Control Modules.

MB Carsoft 7.4 Multiplexer

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:48:04 +0800

MCU controlled Interface for Mercedes Benz Carsoft 7.4 brand new.You can read/erase all fault codes with this device,and also can read ecu information.

MCU Controlled Interface for Mercedes Benz Carsoft 7.4 Brand New

Note:
1. This MB Carsoft 7.4 Can Only Test Cars Before 2004. If You Want To Test New Car Models, You Can Buy MB Star C3 Or C4
2. You need to use this software under Windows XP system and close anti-virus software!!!

Description:

YOU GET REPAIR INFORMATION AND FEATURES LIKE LIVE DATA AND CODING,TOTAL AND SINGLE DIAGNOSIS - READ and ERASE FAULT CODES LIVE DATA (some ECUs only) - ECU INFO - REPAIR INFO - PRINT REPORT

Petrol Engines: ENGINE - TYPES until April 2004 Additional Features: - ME LIVE DATA, ME CODING, ME ADAPTATION Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter

Diesel Engines: ENGINE - TYPES until April 2004 Additional Features: - CDI LIVE DATA, CDI INJECTOR TEST Vehicle Types: - W124 / W202 / W140 / W210 / W208 / W203 / W163 / W168 / W220 / G461 / G463 / Vito / V-Class / Sprinter ABS - ASR - ETS - ESP - BRAKE Systems until April 2004 Additional Features: - ESP LIVE DATA, ABS ACTIVATION '95 onwards Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter SBC - SENSITIVE BRAKE CONTROL Systems till April 2004

Additional Features: LIVE DATA , DE-ACTIVATION & ACTIVATION OF THE BRAKES

Vehicle Types: W211 / R230 AIRBAG - AIRBAG Systems until April 2004

Additional Features:

ECU Coding

Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter KI - INSTRUMENT CLUSTERS until April 2004
Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter BAS - BRAKE ASSISTANCE Systems until April 2004
Vehicle Types: - W202 / W210 / R129 / W140 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter EGS - GEARBOX Systems until April 2004
Additional Features: - LIVE DATA . ADAPTATION Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W211 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 KG - KEYLESS GO Systems until April 2004
Vehicle Types: - W220 / W215 / R230 ASSYST - SERVICE INTERVAL Systems until April 2004 Additional Features: - SERVICE RESET, SERVICE

Programming:

Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito / V-Class / Sprinter AIRCONDITIONING - AIRCO Systems until April 2004 Additional Features: - LIVE DATA INFO (Guidance to Display A/C Live Data on vehicle display)
Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 / Vito/ V-Class / Sprinter AIRMATIC - AIR SUSPENSION Systems until April 2004 Additional Features: - LIVE DATA , ACTIVATION
Vehicle Types: - W220 / W215 ABC - ACTIVE BODYCONTROL Systems until April 2004
Vehicle Types: - W220 / W215 / R230 PSE - PNEUMATIC Systems until April 2004
Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W220 / W215 / R230 / G461 / G463 PTS - PARKTRONIC Systems until April 2004 Additional Features: - LIVE DATA
Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W220 / W215 / R230 / G461 / G463 AAM - ALL ACTIVITY Systems until April 2004 Additional Features: - ECU CODING
Vehicle Types: - W163 EAM - EXTENDED ACTIVITY Systems until April 2004 Additional Features: - ECU CODING
Vehicle Types: - W163 D2B - COMMAND Systems until April 2004 Additional Features: - ECU CODING
Vehicle Types: - W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 ATA / DAS - ANTI THEFT ALARM Systems until April 2004
Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 EIS - ELECTRONIC IGNITION Systems until April 2004
Vehicle Types: - W124 / W202 / W140 / R129 / W210 / W208 / W209 / W203 / W220 / W215 / R230 / G461 / G463 UCP - UPPER CONTROL PANEL Systems until April 2004
Vehicle Types: - W209 / W203 / W220 / W215 LCP - LOWER CONTROL PANEL Systems until April 2004
Vehicle Types: - W210 / W208 / R230 OCP - OVERHEAD CONTROL PANEL Systems till April 2004
Vehicle Types: - W210 / W208 / W209 / W203 / W220 / W215 / R230 HRA - XENON LIGHT Systems until April 2004 Additional Features: - LIVE DATA, ACTIVATION
Vehicle Types: - W140 / R129 / W210 / W208 / R170 / W209 / W203 / W163 / W168 / W220 / W215 / R230 / G461 / G463 RVS / VD - CONVERTIBLE TOP Systems till April 2004
Vehicle Types: - R170 / R230 SAM - SIGNAL ACQUISITION Systems until April 2004
Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R230 DCM - DOOR CONTROL Systems until April 2004
Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R230 ESA - ELECTRICAL SEAT Systems until April 2004
Vehicle Types: - W202 / W210 / W208 / W209 / W203 / W220 / W215 / R23 FOR ALL MERCEDES MODELS UP TO 2004

Package List:

MB Carsoft 7.4 Interface OBD2
connection cable MB 38 pin connection
cable MB 3 pin
banana cable
RS232 extension cable

FAQ:

Q:What can I do by this?
A: You can read/erase all fault codes

BMW ICOM BMW ISIS ISID A+B+C Without Software

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:53:54 +0800

BMW ICOM BMW ISIS ISID A+B+C can program, diagnose and test complete system for BMW,which fully replaces DIS GT1/SSS/OPS and OPPS. All BMW series can be processed with the ICOM-A, B and C-modules.

Best Quality BMW ICOM A+B+C Without Software

Hardware Version: V3.10
This One Does Not Contain Software, If You Want This Hardware With Software Together, You Can Buy Full Set BMW ICOM

Description:

ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN)
ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system
ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2)

Optional Information:

HS Code: 8708 Parts and Accessories of the Motor Vehicles BMW Group ISIS Next Generation Tools 3G 2008

3G Components:

Integrated Service Information Server (I S I S) two servers (one backup) + ISTA
Integrated Service Information Display (ISID) portable tablet device
Integrated Communication Optical Module (ICOM) set of vehicle interface devices-all models
Integrated Measurement Interface Box (IMIB) measurement interface device
Integrated Service Access Point (ISAP) for wireless connection to ISIS

BMW ICOM Scanner FAQs:

Q: When I install BMW ICOM software in English, it works well, but when I choose Spanish, it display errors.
A: Except English, German and Chinese, if you install BMW ICOM in the other language, you will get the same errors.

Q: What is BMW ICOM password?
A: ICOM BMW power-on password is lowercase letter bmw, when you come to password 1 and password 2, input capital BMW, and enter nothing in password 2.

Q:BMW ICOM do air suspension? I mean air suspension calibration or reset? Thanks
A: No, it doesn’t .

Q: Can I use the BMW ICOM software from other suppliers?
A: Better use ICOM software from us, otherwise it doesnot work

Q: What computer system BMW ICOM ABC works on?
A: BMW ICOM with moveable hard disk run with win 7, cpu i5 and over 4gb memory. As for BMW ICOM with internal hard disk, you directly insert internal hard disk into computer, and open computer to diagnose and program.

AK500Pro AK500 PRO Super Mercedes Benz Key Programmer Without Remove ESL ESM ECU

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:56:16 +0800

AK500Pro is the most advanced Benz programmer in the world now. AK500Pro internal Benz original factory calculator, no need remove ESL ESM ECU, with EIS data directly calculate out original factory key data.AK500Pro is the only machine in the world that has KEY-LESS go writing function.

AK500 Pro Super Mercedes Benz Key Programmer Without Remove ESL ESM ECU

AK500 Pro Feature:

1. Faster and safer to write MCU.
2. Internal Benz original factory key generator.
3. Support NEC fast renew, Motorola MCU safe read and write.
4. Support infrared read and write NEC key and Motorola MCU key.
5. Support Benz read and write "Key-less go" Key.(Only this machine support)
6. Support through OBD port active Key-less function.
7. Key test function: more easier to test key and EIS(ESL).
8. Support ESL fast unlock, no need 32G database.
9. Support through OBD read and write SBC data, easier for change SBC control unit.

Product Parameters:
Online Communication Interface: USB2.
Power Specifications: AC Input 100-240V, 50/60HZ; output 12V/2A DC power consumption: 40W

Does AK500PRO Support Mercedes Benz W204 After 2008?
Answer: so far AK500PRO doesn't support NEC eeprom key programming, but support AK500pro NEC eeprom key calculation.
W204 is with NEC eeprom, therefore AK500pro neither supports W204 nor supports the following Mercedes Benz models: w204/w207/w221/w218 and W164 after 2008 year which EIS model CPU is NEC.

Important Notice on KEYLESS GO Function

If you want to use KEYLESS GO function: the key used to make key must be new and blank key, it can't be used key. New key must be as the same type and frequency as the original keyless go key. Otherwise it will cannot support keyless go function.
AK500 do ESL: read out original ESL data, generate new key data, write new data .binw back to ESL( now must use that 32GB hard disk database then can renew ESL)
When you deal W203 ECU, if your ECU is simens, it do not have eeprom. Resolution: Read flash of ecu, then make renew. Then use MB STAR to do doing.
AK500PRO can write keyless go key. But you must wirte via IR( Your keyless go key must be completely new or blank. If your key is old, it can read out date, then it can not be write again, you must renew it then can write).

**AK500Pro VS AK500, Buy AK500Pro or AK500**
AK500	AK500Pro
Read and write EIS: HC705/HC908/HC912/9S12	Read and write EIS: HC705/HC908/HC912/9S12
No Benz original factory key calculator	With Benz original factory key calculator
Need to remove ESL/ESM/ECU to synchronize data	Support calculating key only need EIS data, no need to remove ESL/ESM/ECU
Doesn't support infrared write old model big key (Motorola CPU)	Support infrared write old model big key (Motorola CPU)
Support programming infrared key for Mercedes Benz 1998 to 2005	Support programming infrared key for all Mercedes Benz 1998 to 2011
Doesn't support EGS which is 722.9 type of gearbox computer	Support EGS which is 722.9 type of gearbox computer
Doesn't support programming key for W203/W211 with ECU flash 29F400 and 29F800	Support programming key for W203/W211 with ECU flash 29F400 and 29F800
Doesn't support Benz read and write "Key-less go" Key	Support Benz read and write "Key-less go" Key
Need 32G database to support ESL fast unlocks	Support ESL fast unlocks no need 32G database
Support SBC computer reset, doesn’t support through OBD read and write SBC EEPROM	Support SBC computer reset,support through OBD read and write SBC EEPROM

Some Important AK500PRO Operation Display:

AK500 Function Menu:

Read ESL EEPROM:

Unlock ESL

Write ESL EEPROM

Syn ESL

Read EIS Data

Wiring Diagram

Read MCU ID

Key Calculator

Calculate Key

Mercedes Benz IR key Maker Calculating Key

Nissan Consult 3 III Professional Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 03:59:19 +0800

Nissan Consult 3 is a professional diagnostic tool for almost all Nissan car models from different regions including Japan,North America, Europe.Nissan Consult 3 is equipped with various function including simultaneous self-diagnosis of an entire system or data recorder

Nissan Consult 3 III Professional Diagnostic Tool

Languages: English, Finnish, French, German, Greek, Italian, Russian, Japanese, Spanish, Chinese(Traditional), Chinese(Simplified)

Nissan Consult 3 Function:

1.Swift Diagnosis and Swift Repairs Through Automated Operations

2.Automated Self-Diagnostics

The system is able to perform accurate diagnosis without having to rely on the diagnostic skills of technical staff at the dealership.Increased efficiency in operations based on wireless technology.With wireless vehicle communication interface, it is possible to check the condition of the vehicle from either inside or outside the vehicle. At dealerships in Japan, it is possible to access the Nissan network to retrieve both the maintenance technology data related to the diagnosis results and spot adequate information on service manual. The dealerships are also able to access their service database and refer to the vehicle’s maintenance history on the laptop PC.

3.Capable of Handling Multiple Complex Defects

4.Enhanced Data Management with Improved Laptop PC

New features such as adoption of color-screen and large-screen monitor allow viewing of large amounts of information altogether for enhanced data management

5.Map Data Update Function for Hard-disk Navigation System

(1) CONSULT:Computerized On-Board System Universal Tester.

CONSULT introduced in 1989,
CONSULT-II introduced in 1999.
CONSULT-III is 3rd generation model.

(2) Communication distance: radius of 5m approx.

CK-100 Auto Key Programmer V45.02 SBB The Latest Generation

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 04:03:36 +0800

CK-100 Auto Key Pro Tool is a new generation of the SBB Key Programmer, the replace version.Alternative to function and feature of the SBB V33.02.Increase much more features and functions.More powerfull and functional.Excellent Quality.
New Version: V45.02

K-100 Auto Key Programmer V45.02 SBB The Latest Generation

Software Version: 45.02
If you bought SBB key programmer on our website before and want to update it to this newer version v45.02,please send back just the mian device of the programmer and also contact us for the shipping fee you need to pay,thank you!

Supported Languages: English,Italiano,Deutsch,Francais,Espaniol,Portugues,Turkey

Note:

When using if it fails to adapte key, then disconnected OBD16 adapter and car connection, after 10 seconds connect again, otherwise vehicle immo system may damaged, CK-100 locked.
It supports Toyota G chip.And you need pin code to do the Ford.

Compared with Silca Sbb, CK-100 Auto Key Programmer New Add Models

Image Display:

Packing List:

1pc x Main Unit

1pc x USB Cable

1pc x Power Supply

1pc x Packing Carton

R270 V1.20 BMW CAS4 BDM Programmer

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 04:07:51 +0800

R270 BMW CAS4 BDM Programmer includes all the features of CAS3 programmer. Directly read and write chip data quickly and safely, support for the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data, safe and effective.

R270 BMW CAS4 BDM Programmer

Software Version: 1.2

Description:

Directly read and write chip data quickly and safely, support the new 2009 7 Series (F01/F02) CAS4 odometer and chips read and write data,safe and effective.
CAS4 includes all the features of CAS3 programmer. It has a powerful Motorola MCU programming function: removing-free programm Motorola MCU EEPROM (HC908) and FLASH (HC912, HC9S12, HC9S12X) series.

Function:

1.Support BMW CAS and CAS4 (0K50E/2K79X/0L01Y/0L15Y/1L15Y, etc.)
2.Support BMW EWS4 (2L86D)
3.Support Benz EZS (1J35D/2J74Y/4J74Y/3K91D/1L85D/1L59W/3L40K/4L 40K, etc.)
4.Supports a variety of SRS modules:(9H91F/0K13J/0K75F/0L85D/0J38M/1E62H/1K7 9X/5H55W, etc.)
5.Support the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.)
6.Applicable to all kinds of EIS/CAS/SRS/ECU automotive modules.

Package List:

1x R270 main unit
1x 26pin cable
1x AC Adapter
1x USB Cable
1x Adapter
1x CD drive

Question:
I bought a R70 to program a M35080v6 eeprom, the tool show:
Read m35080v6.......... Send command to R270......wait.....
Send setting to device.................... For 30 minutes and it cannot read the mileage data.

Answer:
As the product description in our website, R270 supports the M35080 series of quick clear, read and write (35080/35080-V6/35080-VP/D80 D0WQ/D160/35160, etc.). Therefore, if you fail to use R270 to work with M35080 eeprom, firstly you have to remove M35080 chip and then plug it into the IC socket, this IC socket is designed for M35080 eeprom. Beside, you need to check if it is well-welded with the board? If not well-welded, it means poor communication,then it can’t clear and read the mileage data quickly.

CN900 Auto Key Programmer Update Online

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Thu, 26 Dec 2013 04:11:58 +0800

New CN900 key copy machine, New Auto transponder chip key copy machine,Using 3.6-inch TFT LCD display, touch screen operation.CN900 key copy machine supports directly copy 4C and 4D chips, can copy such as Toyota 4d67,supports update online;two months later, it will be able to copy ID46 and Toyota G chip;CN chips can be copied many times.

CN900 Auto Key Programmer

CN900 USB Driver Free Download
CN900 Software Free Download

Advantage:
1) Can directly copy 4C and 4D chips, can copy such as Toyota 4d67.
2) Can update online.
3) CN chips can be copied many times.
4) Can recongize locked ID48 and can unlock ID48.

Main Features

Function 1:
1) Read out the chip code for 11 12 13 33 T5 40 41 42 44 45 46 48 4C 4D 8C and 8E chips. With the detail format for ID 48 and 4D Chips.
2) New identify functions for Toyota "G " chip key (year: 2010) (Chip: 4D-72).
And it will show if the key is the main key or the vice key for Toyota, and later will add new identify function for the Chinese Car.

Function 2:
It can identify Toyota smart key, and read out the data.

Function 3:
It supports on copying the chips (11 12 13 33 T5 41 and 42) and parts of 44 and 45.
Using "FREE " dedicated chips can copy none battery 4C and 4D chips directly.(Remark :cn1(4C),cn2(4D) is the name of special chip)

Function 4:
Connecting with Chinese PC software, it can save the read key code data unlimited.

Function 5:
Support on the chip programming: with the inner function of HITAGETI, it can write ID 46 Renault Crypto chips.

Function 6:
Without removing the ECU (Benz W140), it can start the chip.

Function 7:
It can unlock the 48 chips except the crypto lock 48 chips.

Function 8:
Support on the pin code calculating for Hyundai and Kia (before 07 year), by using the Last 6 Codes of VIN Number.

Function 9:
Support on starting the key and calculating the pin code for more than 60 kinds of cars.
Support on programming all kind of Fiat key, such as (11, 13 and 33), These 3 kinds of 48 chips anti-theft way.

Function 10:
It Upgrade to identify HONDA_46 CRV_46/CIVIC_46/ Mitsubishi 46
Ordinary 60 can be programmed to be 66/67/68/71/74

Function 11:
It Upgrade to copy CN1 (4C), CN2 (4D) chip .And size is 6mmX12mmX4mm
Support on the software update, such as adding new function for copying the induction card for Electronic Gate.

Vehicle Scanner Auto Diagnostic Tool Scanner JBT-CS538D

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Fri, 27 Dec 2013 13:06:48 +0800

JBT-CS 538 series, including JBT-CS 538C and JBT-CS 538D. They can diagnose all Asian, European and American cars, such as BMW, BENZ, TOYOTA, HOND A, MAZDA, FORD, Buick and so on.

Vehicle Scanner Auto Diagnostic Tool Scanner JBT-CS538D

Auto Scanner JBT-CS538D Description

JBT-CS 538 series with color screen, self-learning function, warning function, and conveniently online upgrading function. However, JBT CS 538D has built-in printers, while JBT CS 538C does not.

Auto Scanner JBT-CS538D Funtion

1. Read DTC
2. Clear DTC
3. Read datastream
4. Unit test
5. Store and printing
6. ECU setting
7. Self learning judging
8. Immobilizer

Auto Scanner JBT-CS538D Specification:

Type: Universal Auto Diagnostic tool
Voltage: 12V
Rate: 9-15w
Certificates: CE ISO9001 and ISO 14001
Brand: JBT
Screen: color display
Platform: Self-researching BT-DDS
Update: Online update
Accessories: Built-in printer
Outer packing: Carton
Inner: Plastic Suitcase
Volume: 0.05 Cubic meters

Package List:

How to use "USB to RS232 Cable"?

Original AUTOBOSS V30 Elite Super Scanner Update Online

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Fri, 27 Dec 2013 13:28:43 +0800

AUTOBOSS V30 Elite Super Scanner, it is More than just reading & clearing fault codes - goes far beyond and accesses the complete vehicle, including: drive line, chassis, body, and the networking/communication modules

AUTOBOSS V30 Elite Super Scanner

Supported Languages: English, Spanish, Russian ( You Can Only Choose One Language )
One Year Free Update Online

Description:

Autoboss V30 Elite Super Scanner is a new scanner made by Autoboss(SPX), The V30 coverage Tspans over 57 manufacturers with up to 148 systems per vehicle. Best of all, the V30's vehicle coverage continues to grow, with simple internet-ready updates accessible to you at the click of a button.

Autoboss V30 Elite Super Scanner Function:

Quick test function to diagnose the complete vehicle

Cover more than 57 makes, 40,000 vehicle systems

More than just reading & clearing fault codes - goes far beyond and accesses the complete vehicle, including: drive line, chassis, body, and the networking /communication modules

Live data and graphing, performs actuations and adaptations

Electronic parking brake, Service light reset and much more

Cutting edge operation system: Windows CE

European & Asian vehicles with dealer-level power

Read & change ECU coding

Coding of the new control modules

Internet update function

Testing report saving function

Built-in Mini Printer

All necessary cables and adapters included

One universal connector for most vehicles, including all CAN vehicles

Special Functions:

Self-Learn function enables the scanner to learn and save correct values for ECU live data parameters from a vehicle in good condition. For example, it will learn that on a Vauxhall Astra 1.7 diesel the coolant temperature sender should be reading between 0.5 to 4.5 V.

Comparison function can compare the learned values against the vehicle you are working on and highlight values which are out of range.

Record function enables users to record the vehicle data when testing the vehicle. And users can send the recorded data back to AUTOBOSS head office for analysis, which will help users solve problems faster.Navigation bar makes this tool more user-friendly.

Autoboss V30 Elite Covering car diagnostic tool latest and early car models of Asian, European, American and domestic.

-You can use 80%-90% functions of the original scanner on many cars.

-Supporting CAN- BUS diagnosis of Volkswagen / Audi, Ford, Mazda, Nissan, Hyundai / KIA.

-Built-in high / low speed CAN- BUS and single CAN- BUS.

-Making all CAN- BUS systems available with only one connector.

-Supporting 5 OBDII protocols and 9 modes.

-Nissan idle speed adaptation.

-Immobilization system generation III adaptation of Volkswagen.

The Equipment can be used as original one with most of cars.80%-90% functions of the original equipment can be used in a few car models.

VW / Audi: All CAN- BUS system after 2005

GM: The testing function has covered 90% of the GM original equipment

Toyota: The actuation function is the same to the original equipment

Nissan: Covering 95% function of the original equipment

Honda: Only system selection is needed for diagnostic scanning

Hyundai / KIA: More than 90% function coverage of the original equipment

All systems of all car models are available

Opel: 17 models can be tested and the basic function makes no difference of the original equipment

AUTOBOSS V30 Elite Specification:

CPU: SAMSUNG ARM9 2410A, 200MHz

Memory: 64M

Flash card: SD card, 8G

Display: 7'' Wide VGA (800×480) Ultra Bright TFT

Power supply: DC 8~15V, AC 110~250V 50Hz

Port: Diagnostic port, COM port, USB port, Power port

Operating system: WINDOWS CE

Storage temperature: -30~85oC

Working temperature: -10~70oC

Humidity: <90%0

Autoboss V30 Elite Network Administration Parameter:

Network output port 6, Aviation plug

Network connection RS485

Signal testing port 6

Communicating interface with PC RS232

Power supply DC, 8-12V; AC, 110-250V 50Hz

Autoboss V30 Elite Terminal Parameter:

Network input port 1,Aviation plug

Network output port 1,Aviation plug

Network connection RS485

Signal testing port 6

Communicating interface with V30 RS232

Diagnostic connector with V30 OBDII-16

Power supply DC, 8-12V; AC, 110-250V 50Hz

Package List:

1pc x Autoboss V30 Elite Main unit

1pc x 8G SD CARD

1pc x OBDII-16

1pc x BMW-20

1pc x MARELLI-3

1pc x GM/DAEWOO-12

1pc x KIA-20

1pc x MAZDA-17

1pc x TOYOTA-17

1pc x TOYOTA-22

1pc x MIT-12+16

1pc x HONDA-3

1pc x AUDI-4

1pc x NISSAN-14

1pc x CITROEN-16C

1pc x Benz-14 Connector

1pc x FIAT-16

1pc x Benz-4 Connector

1pc x BENZ-38

1pc x Main Cable(2m)

1pc x Battery Cable

1pc x Cigarette Cable

2pc x FUSE 5A 30*6

4pc x FUSE 5A 20*5

1pc x DC Adapter

1pc x Power cable

1pc x SD Card Reader

2pc x Printing paper

Package Details:

SVDI VW/AUDI Vehicle Diagnostic Interface

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 02:48:02 +0800

SVDI VW/AUDI Vehicle Diagnostic Interface

What is SVDI?

SVDI is the newest car and truck diagnostic adapter for VW/AUDI; it has the same function as the original AVDI.

SVDI is Compatible with the Following Software:

1) VW, Audi, Skoda, Seat software

2) TAG key tool software

SVDI Software Version:

1) VW, Audi, Skoda, Seat Software Version: V18.0

2) TAG key tool Software Version: V5.8

SVDI Supported Languages:

1) VW, Audi, Skoda, Seat software Language Available: English, Simplified Chinese, German, Spanish, French, Russian, Italian, Danish, Czech, Bulgarian

2) TAG key tool software language available: English

Attention:
1.SVDI software can only installed on WINDOWS XP SP2/SP3, not working on Windows Vista or Windows 7.
2. Now we can open the Authorization of BMW for SVDI. Price is 449.99USD

SVDI Highlights:

1 Read PIN code via OBD

2 Match key via OBD, generate dealer key

3 Calibrate odometer via OBD

4 Clear airbag (SRS) crash data via OBD

5 Read and write flash memory of Engine via OBD, reset the times of flashing

6 Able to remove the limit to the car TV speed that the MMI-TV system of some car models put on.

7 Calculate code- support both the long and short code.

8 Synchronize KESSY dashboard and ELV (Electric Steering Lock)

Features:

1) Program the key for the newest BMW F series via reading CAS4 data. But you must open the Authorization of BMW. Then you can do this function

2) Generate the chip ID67,ID68,ID70,TP22,TP23,TP24 and so on.

3) Via reading immobilizer unit data, generate the keys for Fiat, Toyota, Ford, BMW, Audi /VW Kessy, Mercedes, Jeep and more.

4) Copy the following chip: Megamos 13, Temic 11/12 and Philips ID33

5) Generate TPX2 chip from The Texas TIRIS 4D chip of Toyota Lexus

6) Generate TPX2 chip from Texas TIRIS 4D chip (need to connect to internet)

7) Generate TPX1 chip from Texas TIRIS 4C

8) Program key for BMW 7943, 7944

Basic Diagnostic Function:

1) SVDI Supported protocols: KWP2000(TP2.0, TP1.6), UDS CAN, KWP1281

2) Read the identifier (Identification Number) for electronic control units (ECU)

3) Read trouble codes for electronic control units (ECU)

4) Erase trouble codes for electronic control units (ECU)

5) Output test

6) Coding modules

7) Scan electronic control units (ECU)

8) Broadcast request

9) Measure value

10) Match channel

SVDI Special Function:

1. CAN Dashboard

1) Correct odometer via OBD, the supported car models as follows: VW Golf6, VW Multivan (2009 - ) , VW EOS (2009 - ), VW Caddy (2009 - ), VW Scirocco, VW Polo (2009 - ), VW Bora (2010 - ), Volkswagen Jetta (2010 - ), Volkswagen Passat CC, Volkswagen Amarok, Skoda Octavia II (2009 - ), Skoda Hao Rui (2009 - ), (2009 - ) Skoda Fabia, Skoda Yeti (2009 - ), Seat Leon (2009 - ), SEAT Altea (2009 - ), SEAT Exeo (2009 - ), Seat Ibiza (2009 - )

2) Support VDO instrument cluster (year 2006 - )

3) Read and write the related data in the dashboard

4) Read immobilizer security code

5) Read PIN code and protect component data via OBD for VW Crafter

6) Read and write NEC MCU (year 2009 - ) immobilizer data

2.EZS – Kessy (Q7/A6/Allroad)

1) Generate Dealer Key

2) Read and write EEPROM data from EZS – Kessy(Q7/A6/Allroad).

3.K-Line Dashboard

1) With this function you can establish diagnostic session with the Instrument cluster via K-Line (KWP1281 or KWP2000)

2) Read and correct odometer

3) Read PIN code

4) Read and write EEPROM

5) 5) Read ROM / Flash from the Instrument cluster

6) Automatically erase "DEF trouble" (Audi A4 with Bosch RB8 dashboard)

4. Engine Control Unit

1) Read EDC17 / MED17 flash memory

2) Read and write flash memory (EDC15, EDC16 all types. Calculate, program and calibrate ME7. 1.1, MED9.x, ME7.5 )

3) Read and write flash calculator(EDC16)

4) Read and write EEPROM(VAG-EDC15x, VAG-ME7.1.1, VAG-ME7.1, VAG-ME7.5, VAG-Cartronic ME7.8.)

5) Read security access code or PIN code (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, EDC17, MED9.x, Simos PPD)

6) Read component security bytes (EDC15, ME7.x, VAG-Cartronic ME7.8, EDC16, MED17.5.1, MED 9.x, Simos PPD)

7) Enable / disable immobilizer for EDC15, ME7.x, EDC16

8) Correct odometer for EDC15, EDC16

5. Component Protection Manager: Component Protection Manager – match, program component protection (Audi A6/Q7/Allroad/A4/A5/Q5)

6. ECU adaptation by OBDII: Add new engine control units by OBDII - EDC16, EDC17, MED17, MED9, Simos petrol, SIMOS PPD Diesel, ME7.5.20, ME 7.5.30

7. BCM2 - Audi A4/A5/Q5 2007+ key programming: Program key for A4/A5/Q5 (2007 - ) with the BCM2 module

8. Program steering lock: After replacing the module of steering lock, you can program steering wheel lock for Volkswagen Touareg / VW Phaeton / Porsche Cayenne / Bentley Continental / Audi A8.

9. TV activation ED1/ED2: Remove the limit to the car TV speed.

10. Key Learning

1) Program key via OBD (With 16 component security bytes) - VW Crafter, Audi R8, VW Golf 6, VW Multivan (2009 - ) , VW EOS (2009 - ) , VW Caddy (2009 - ) , VW Scirocco, VW Polo (2009 - ) , VW Bora (2010 - ) , VW Jetta (2010 - ) Skoda Octavia II (2009 - ) , Skoda Hao Rui (2009 - ) , (2009 - ) Skoda Fabia, Skoda Yeti (2009 - ) , Seat Leon (2009 - ) , SEAT Altea (2009 - ) , SEAT Exeo (2009 - ) , Seat Ibiza (2009 - )

2) Support chip TP22/TP23/TP24/TP25 and 48, and generate as any key as you want.

3) Directly use 48 chip to learn key without generating dealer key for the chip TA2/TA3/TA4/TA5

4) Read the 7th byte security code from the working key (Megamos, Hitag2)

5) Support key learning for Lamborghini Gallardo

11. Dump Tool: After the EEPROM of corresponding unit is read out, calculate security access code and correct mileage by the dump tool.

12. Airbag (SRS)

1) Read / write Siemens EEPROM of airbag module (Audi A6/Q7/Allroad, VW Golf5 ..., Skoda Octavia II ..., SEAT Altea ...)

2) Clear airbag crash data.

13. Customize read / write: Customize read and write by computer for a part of units.

14. PIN Converter

15. Service Light Reset

16. Remote Control Programming

17. Navigation: Enable / Disable navigation system "Eject" button.

18. Cruise Control System: Enable / Disable cruise control system, modify steering wheel electronics (SWE) system configuration

19. Brake Pedal

TAG Key Tool Supported Chip:

Megamos 13,

Megamos 48 (Megacrypt I),

Megamos 8E (Megacrypt II),

Texas 4C,

Texas 4D,

Temic 11,

Temic 12,

T5,

TK5555,

Philips PIT - 7930/7931/7935 (PIT),

Philips HITAG2–7936, 7941, 7942, 7943, 7944, 7945, 7946, 7947, 7953, 7961,

Hitag-Pro 7937, 7938, 7939, 7952,

JMA TPX1, TPX2

Package List:

1pc x SVDI Main unit

1pc x OBDII Cable

1pc x Adapter Connect Cable

1pc x TAG Key Tool

1pc x USB Cable

1pc x CD

ALLSCANNER Toyota ITS3 Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 02:59:50 +0800

ALLSCANNER is the latest automotive diagnostic tool. It was designed by the new international standard, it can identify different vehicles intelligently, and it can support all vehicles in the market.

Allscanner Toyota ITS3 Tool Without Bluetooth Version

Support Car Modle: Honda, Toyota (Other Software Still in Developing)

Description:

VCX is the latest diagnostic software platform of ALLScanner, be used with hardware of VCX ,the characters be shown as below:
Diagnostic software can be operated under WinCE and Windows, available installation for Laptop or PDA.
Automotive Diagnostic language (VDL) exploitation platform based on XML by self-determination and high efficiency database management system, these will make it easily to explore the vehicles.

Special Function for Optional

1. Support diagnostic software of TOYOTA TIS Techstream to realize same function as that.
2. Support diagnostic software of HONDA HDS,On developing.

Specification:

1.Item State

CPU 16 digit Dual Cell specialize CPU
RAM 64KB RAM
FLASH 256KB FALSH
Diagnostic Port 24PIN, self-determination design
Wireless Port 802.11b/g WIFI wireless
LED 4 LED indicator light,indicate power and status.
Power DC 9V-28V
Consumption 3W
Working Temperature -20�C~70 �C
Storage Temperature -40�C~85 �C

2.Product Feature

1) Adopt 16 digit Dual Cell specialize CPU, Full compliant with all vehicles protocols.
2) Use standard 802.11b/g WIFI wireless,connect easy to network, or connect to Laptop to realize wireless diagnosis.
3) Diagnostic software accord with international standard, collocate communication port flexibly, less connectors
4) Self-determination design for connectors and cables.
5) Hardware accord with CE and FCC standard.
6) Support almost all vehicles socket.

3. Optional Information

HS Code : 8708 Parts and Accessories of the Motor Vehicles

Package List:

VCX Diagnostic box, the communicate bridge between mainunit and vehicles.
Connector Connect to vehicle diagnostic socket.
Wire connect RS232 serial port,115200bps
CD Driver

BMW ICOM BMW ISIS ISID A+B+C Plus 2013.01V BMW ICOM Latest External HDD

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:08:41 +0800

BMW ICOM BMW ISIS ISID A+B+C is the latest program, diagnose, coding and complete system BMW have the full system replace DIS GT1/SSS/OPS and OPPS. All BMW series can be processed with the ICOM-A, B and C-modules.

BMW ICOM A+B+C

Attention: ISIS and ISID are both Multi-languages, if you want to check the information of Circuit diagram, only English and German.

BMW ICOM Software ISTA/D ISTA/P

Software Version: 2013.1
Software Used On: BMW ICOM & BMW ICOM A2
ISTA-D:2.34.0
ISTA-P:48.1.002
VIN: 2012.12.15
Software format: External HDD
Memory,Hard disk 500GB
Run in VWMARE(Virtual Machine)

Computer System Requirement:

1.Windows 7 Professional 64 Bit
2.CPU i3 or i5 i7 processor
3.With 8GB memory

Description:

ICOM A: Vehicles with OBD capability (Connect to ISIS/SSS/ISID with LAN or WAN)
ICOM B: For programming with MOST port (Connect to MOST in vehicle / to ICOM-A with USB system
ICOM C: Older model series with diagnosis socket in engine compartment (OBD 2)

Optional Information:

HS Code: 8708 Parts and Accessories of the Motor Vehicles BMW Group ISIS Next Generation Tools 3G 2008

3G Components:

Integrated Service Information Server (ISIS) two servers (one backup) + ISTA
Integrated Service Information Display (ISID) portable tablet device
Integrated Communication Optical Module (ICOM) set of vehicle interface devices-all models
Integrated Measurement Interface Box (IMIB) measurement interface device
Integrated Service Access Point (ISAP) for wireless connection to ISIS

MST-9000+ Automobile Sensor Signal Simulation Tool MST-9000

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:18:59 +0800

Automobile Sensor Signal Simulation Tool / 2012 Sensor Signal Simulation Experts-Golden version MST-9000+
New update version: 2012 MST-9000+

Automobile Sensor Signal Simulation Tool MST-9000

Highlights:
1. Language: English
2. Software version: 2012 MST-9000+
3. Update: Via Email
4. Warranty: 1 year
5. Increase Simulate Knock Sensor Function, Output Port are KS2, KS2
6. Increase Reserved Port X1-X6 Stand-By, The Customer Can Set Simulation Singnals As Need

MST-9000 Description:

The Automobile Sensor Signal Simulation Tool is an very useful tool for professional technician during car ECU reparing & key programming.
This Automobile Sensor Signal Simulation Tool is an indispensive car ECU repair tool, with newly update and more stable function. After many years R&D and times of upgrades, now our sensor siginal simulation expert has been the most fix purchasing equipment with advance technology for many workshop and automobile training school.

Sensor Signal Simulation Tool Detailed Application Range:

1. Automobile sensor dynamic diagnosis, engine, transmission, ABS, air-conditin, Immo etc. for ECU repairing, auto teaching aid model driver, auotmobiles R&D.
2. This Sensor Signal Simulation Tool fit multi-brands cars made in Asia, Europe, USA.

MST-9000+ Major Function:

1. Users can set the engine control system, independent of different types of crank signal output (for all models of computer-driven)
2. Automatic transmission input and output shaft signal simulation
3. Set the waveform data is written directly
4. Engine speed signal output
5. Speed signal output (Hall signal, magnetic signal)
6. Three, four-channel ABS wheel speed signal output
7. PC board working current test
8. EGR solenoid valve drive
9. Carbon can clear the solenoid valve drive
10. Tachometer drive
11. Blower Control Module Driver
12. Idle valve driver
13. Stepper motor drive (4, 6 lines)
14. Injector Driver
15. Ignition coil driver
16. Ignition module drive
17. Parking sensor (ultrasound) probe drive
18. Automatic Shift Valve Drive
19. Shift quality valve drive
20. hydraulic valve drive
21. Water temperature, intake air temperature, outdoor temperature, evaporation temperature sensor signal simulation box
22. Oxygen sensor signal simulation (manual)
23. Oxygen sensor signal simulation (auto signal)
24. Throttle signal simulation
25. Carbon can clear the solenoid valve simulation
26. EGR solenoid valve simulation
27. Air flow sensor, intake air pressure sensor (analog, digital) signal simulation
28. Ignition coil simulation
29. Injector simulation
30. Idle stepper motor simulation (four-lane, six-lane)
31. A C relay simulation
32. Pump relay simulation
33. Radiator fan relay simulation
34. Audio signal outputs, power amplifier driver
35. Automatic Shift Valve, shift quality valves, hydraulic control valve simulation
36. Fuel injection pulse width measurement
37. Central lock server simulation
38. Burglar resistance simulation
39. User Extension

MST-9000 Special Feature:

1. All cars crank signal simulation experts
It can be set arbitrary waveform output, can produce all the models of today's engine crankshaft, camshaft signals (Hall, magnetic, optical signals), waveform data, waveform memory card from the long-term preservation, waveform data for free online updates.
2. All cars sensor signal simulation experts
Speed signal, speed signal (Hall, magnetic, optical signals), ABS wheel speed signal, the oxygen sensor signal, throttle signal, air flow, inlet pressure sensor (analog, digital) and other signal simulation
3. All cars Actuator experts
Tachometer, odometer, blower control module, injector, ignition coil, ignition module, frequency and pulse width control solenoid valve, stepper motor drive (four-lane, six-lane), car audio amplifiers, etc. etc all cars actuator simulation experts:
Actuators simulation for Ignition coil, injectors, idle speed stepper motor, ultrasonic generators etc.
Strong domestic first-line five-channel editing functions crank signal
Five arbitrary wave signal analog output

Output Signal:
magnetic signals, Hall signals, optical signals
1. Actuator: Drive current 3A, 1% ~ 99% duty cycle continuously adjustable frequency continuous adjustment;
2. Sensor Signal Simulation: resistance 100Ω ~ 10000Ω voltage of 0V ~ 5V × 2 0V ~ 1.5V 0V ~ 12V
3. The implementation of simulated driving: 69-channel simultaneous output
4. Stepper motor drive: current 1A, applicable to all vehicles with four, six, stepping motor driver;
5. Ammeter maximum test current: 5A

Packing List:

1. Sensor signal simulation expert Gold Edition 1 set
2. Data line 2
3. Power line 1
4. CD 1
5. USB cable 1

Profi WIFI OBD2 CarBrain C168 Scanner Bluetooth Update Online

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:37:11 +0800

C168 scanner internet online update,Maintenance records management and Standard UBS port.It is easy to use and excellent performance.Bluetooth technology and has a full range coverage of vehicles.

CarBrain C168 Scanner

C168 Description:

CarBrain C168 scanner is a wireless automotive fault diagnostic scanner , C168 can be installed on most equipments that have Windows operating system, and it enormously enhances the compatibility between automobile examination and other automobile maintenance equipments.

C168 Functions:

1.Internet online update, users can update software for individual vehicle models of their own choice via Internet
2.Maintenance records management
3.Standard USB port

Construction

1) Chipset: ATMEL Chip
2) Operating system: Windows
3) Dimension of COMBOX:12*8*2.5CM
4) Dimension of RF box: 6*5*2.5CM
5) Testing port 1:Bluetooth wireless
6) Testing port 2:diagnostic cable
7) Power supply of COMBOX:+12
8) Power supply of RF box: USB
9) Mainboard: Anti-electromagnetism industrial control mainboard
10) Communication mode:COM port and Bluetooth wireless

Features

1) Easy to use, compact size, excellent performance, quick response
2) Using Bluetooth wireless technology and based on windows operating system
3) Has a full-range coverage of vehicle types such as BMW, VW/AUDI, Seat, Skoda, Landrover, Citroen, Renault, Fiat, Volvo,Peugeot, Opel, Chrysler, Ford, GM, Obdii/Eobdii Can/OBD injectionsystem, Toyota/Lexus, Honda, Mitsubishi, Nissan, Mazda, Suzuki,Daihatsu, Daewoo and Kia
4) Equipped with CAN adapter to test auto model with CANBUS
5) Display data stream in waveform
6) Perform functions like reading DTC code, erasing DTC code, readingdata stream tests on Engines, AT, ABS, Airbags and other

Vehicle Integrated Diagnostic Platform Full Version

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:39:57 +0800

Vehicle Integrated Diagnostic Platform Full Version supports diagnosing and key programming at the same time. HONDA Full Version scanner diagnoses for Honda & Acura from 1992 to 2010 and no need to input password, the machine automatically calculate the password and enter the IMMO system.

Vehicle Integrated Diagnostic Platform Full Version

Honda Functions:

1.DTC reading and clearing (allows the user to read both permanent and temporary DTCs. Once the fault causing the DTC has been found and repaired the DTC tool can then be used to clear DTCs.)
2.Snapshot function (capture data relative to a trigger event)
3.Vehicle data display (value, line graph, or bar graph formats)
4.DLC locator diagrams
5.Data list display (real-time display of ECU parameters)
6.System Functional Tests (allows for more detailed testing of specific parts of the vehicle systems, "where the ECU" support these tests (e.g. Window movement, Lighting, Vehicle Gauges and engine components))
7.Onboard tutorial
8.Immobiliser
9.Odometer Rewrite
10. It Can Do Smart Keys. No need to input password. The machine automatically calculates the password and enters the IMMO system.

Specification:

1.Hardware and Software Requirements:

1) PC or laptop with either Windows 2000 Professional (SP4 or later) or XP (SP1 or later)
2) Hard disk drive with at least 400MB of free space
3) CD-ROM drive (if a high-speed Internet connection is not available)
4) RS232 port required to connect PC to IDT
5) Monitor capable of displaying in VGA mode or above (1024 x 768 recommended)
6) Use for the following cars: All H-onda model(H-onda & Acura from 1992 to 2008)

2.Honda Electronic Control System:

1) Engine System
2) Theft Guard System
3) No key enter system, support serial and USB.
4) Antilock system
5) Safety airbag system
6) Electronic air throttle system
7) Electronic booster system
8) Body electric system
9) Four-wheel turning system
10) ATTS
11) IMA
12) VTM-4
13) TPMS

Package List:

1x Vehicle Integrated Diagnostic Platform for H-ONDA Full Version
1x OBD2 cable
1x USB Cable
1x H-onda 3pin to 16pin Cable
1xCD

FAQ:

Q: What is the dealer code for this item?
A: 000000000001

GNA600+VCM 2 in 1 IDS V85 JLR V134

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:46:38 +0800

GNA600+VCM for all H-onda ford mazda jaguar and landrover diagnose and programming. It contain the function of GNA600 and VCM in one product.

GNA600+VCM - For All H-onda, Ford, Mazda, Jaguar and LandRover

Highlights:
1. Software Version: IDS: V85
JLR: V134
GNA600: V2.027
2. Supported Languages: English, Spanish, German, Portuguese, French, Italian, Russian, Japanese, Greek, Thai, Polish, Swedish, Korean, Indian, Finnish, Norwegian, Czechic, Slovenian, Danish, Vietnamese, Turkish, Dutch, Hungarian, Chinese
3. OS Requirement: GNA600+VCM can only work for Windows XP(SP2 or later). It cannot work for VISTA

GNA600+VCM equal GNA600+VCM/IDS

1. Reprogramming for all ford vehicles;
2. Reprogramming for all mazda vehicles;
3. No password for all Honda key and smart key;
4. No password for all landrover key and smart key;

GNA600+VCM Functions:

Scantool Diagnostics

1. All ford and mazda vehicles(Include all functions of original VCM/IDS)
2. LandRover (for all High CanBus and Middle CanBus protocol)
3. All ford and honda vehicles, (Include all functions of original GNA600)
4. All Landrover vehicles(Include all functions of original VCM/JLR)

Vehicle Reprogramming

1. All ford and mazda vehicles(Include all functions of original VCM/IDS);
2. All Landrover vehicles(Include all functions of original VCM/JLR);

Immobi and Smart Key

1. All ford and mazda vehicles(Include all functions of original VCM/IDS);
2. All Honda vehicles(Include all functions of original GNA 600 + Honda HDS+ FLY100 Full Version);
2. LandRover vehicles(Include all functions of original VCM/IDS);
4. All Landrover vehicles(Include all functions of original VCM/JLR);

Package List:

1 * GNA600+VCM vehicle communication module
1 * OBD-16 Cable
1 * USB 2.0 Cable
1 * One Box

Chrysler Diagnostic Tool (WITECH VCI POD)

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 03:55:40 +0800

Chrysler Diagnostic Tool (WITECH VCI POD) is designed to work on Chrysler, Jeep, Dodge, Ram vehicles
Supported Languages: English, French, Spanish, Italian, Russian, Japanese, Korean, Chinese

Chrysler Diagnostic Tool (WITECH VCI POD)

Software Version: 13.03.38

Supported Languages: English, French, Spanish, German, Italian, Russian, Japanese, Korean, Chinese

Chrysler Diagnostic Tool (WITECH VCI POD) Installation Tips

1.WITECH VCI POD contains DRB III emulator, please connect the vehicle to the WITECH before using DRB III emulator, and it needs one minute to open DRB III emulator.

2.When you want to use WITECH software to program, you'd better change the language to English; programming in English will be very stable.

3.WITECH software start is a bit slow; please wait until the screen has a full display before proceeding to the next step.

4.After connect the WITECH hardware with the computer, please check whether the driver is well installed, whether the software find the hardware. After open "wiTech Diagnostic Application" on the desktop, you can't go on operating unless the "Device" status is green.

Chrysler WITECH Descrtiption:

The wiTECH (tm) diagnostic system is designed to work on Chrysler, Jeep, Dodge, Ram vehicles. It provides the latest significant hardware and software performance enhancements over the StarSCAN (tm) and StarMOBILE (tm) diagnostic tools. This cutting-edge technology will enable technicians to increase their productivity and provide world-class diagnostic services to your customers.

The wiTECH VCI Pod (tm) using the wiTECH (tm) Diagnostic Application, this software is capable of several diagnostic and maintenance

WITECH VCI POD Functions

Streaming live data

Generating diagnostic reports

Customizing data displays

These Features Provide Technicians with Full Dealer-Level Functionality.

WITECH VCI POD kit connects to a vehicle using the OBD II Cable. It must be connected to a laptop using a USB cable. It can also work with the DRB-III (tm) Emulator Software to perform most DRB-III diagnostic and reprogramming functions.

Chrysler WITECH Package List:

1pc x wiTECH (tm) VCI Pod

1pc x Vehicle Cable

1pc x Power Transformer

1pc x USB Cable

1pc x Carrying Case

1pc x CD Software

VAS 5054A ODIS V2.0 Bluetooth Support UDS Protocol with OKI Chip

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 04:02:20 +0800

VAS 5054A best quality version, with OKI chip, support UDS protocols. This version vas 5054a support VW AUDI SKODA and SEAT, support multi-language. Newest software version is ODIS V2.0, with bluetooth. If you want high quality VAS 5054A, please choose this one.

Best VAS 5054A ODIS V2.0 Bluetooth Support UDS Protocol with OKI Chip

Note: VAS 5054A hardware support online coding, but our software does not support. Need get software from VW dealer for online coding function.

Features:

1. With OKI Chip

2. Support UDS Protocol

3. Multi-Language: (you can choose any language you need freely)

English/Japanese/Portuguese/Romanian/Korean/Dutch/Polish/Turkish/Spanish/French/Italian/Croatian/Danish/German/Swedish/Finnish/Slovenian/Czech/Russian/Greek/Chinese

4. Supported Car Models: VW, AUDI, SKODA, SEAT Bently and Lamborghini

5. Bluetooth Version

VAS 5054A ODIS V2.0 Computer Windows System Requirements:

Windows System Language: American English

Windows XP(xp2/xp3)

System C:// have to be NTFS format

C:// need to have at least 10GB space for installing VAS 5054A

Description:

The VAS 5054A is a universal diagnostic interface for the vehicles of the Volkswagen Group and all OBD vehicle systems from other manufacturers.

The integrated Bluetooth interface connects the vehicle with a notebook, desktop PC or test system.

No cables are needed for vehicle diagnostics using the VAS 5054A.

The range of the wireless Bluetooth connection is 2 to 5 meters,depending on the environment and the type of Bluetooth adapter used on the PC side.

The Serial Port Profile (SPP) is used for data transfer via Bluetooth. Different Bluetooth security levels are supported.

Specification:

The vehicle protocols are handled directly in the VAS 5054A.

This ensures fast response times and a reliable real-time behavior independently of the PC operating system. Every time a connection is established, the VAS 5054A software is identified with the version installed on the application PC. The VAS 5054A thus automatically adopts any new features provided after a new software version has been installed on the application PC.

The diagnostic application and the associated Diagnostic Base System are installed on the application PC.

The diagnostic base system can access the VAS 5054A via Bluetooth or USB.

Access Via Bluetooth: After a connection to the VAS 5054A has been set up, the Bluetooth software provides a virtual serial COM port (Bluetooth Serial Port Profile). The Diagnostic Base System uses this COM port to communicate with the VAS 5054A.You need to specify this port when you install the diagnostic application.

Access Via USB: You can also connect the VAS 5054A to the application PC by using the supplied USB cable. Windows detects the VAS 5054A through Plug and Play, and automatically installs the drivers copied when you installed the diagnostic application. Setup of the VAS 5054A is then complete and the device is ready for use by the diagnostic application.

The Following Vehicle Bus Systems are Supported:

K line (ISO9141-2)

High-speed CAN (ISO 11898-2)

Low-speed CAN (ISO 11898-3)

J1850 (SAE J1850)

Package List:

1× VAS 5054A main unit

3×CD(VW AUDI SKODA SEAT Bently Lamborghini software)

PCB:

Ford Scanner USB Scan Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 04:05:08 +0800

Ford scanner fully works with Ford and it is PC-based scan tool designed to use through USB port connection. Ford scanner read and clear manufacturer specific trouble codes, it also isplay all the manufacturer specific sensor data in real-time.

Ford Scanner USB Scan Tool

Description:

Ford-SCANNER is fully FORD compliant PC-based scan tool designed to use through USB port connection.

Function:

1. Display all the manufacturer specific sensor data in real-time.
2. Read and clear manufacturer specific trouble codes.
3. Modules access: PCM, TCM, ABS, Airbag, Cluster
4. Processor: 90c2610 Protocols: FORD (SCP), FORD (ISO9141).

Specification:

1. Vehicle List

1) Diesel Engine
Fusion 1.4TDCI,Fiesta 1.4TDCI,Focus 1.6TDCI,Focus 1.8TDCI,Focus cmax 1.6TDCI,Transit,Transit connect 1.8TDCI,Mondeo 2.0 TDCI

2) Gasoline Engine
KA 1.3i,Fiesta 1.4i 1.6i,Fusion 1.4i 1.6i,Focus 1.6i,Focus cmax 1.6i,Focus vct 1.6i,Focus cmax vct 1.6i,Focus ghia 1.6i,Mondeo 2.0i

Package List:

1pc x Ford USB scanner
1pc x CD drive

Original CareCar C68 Retail DIY Professional Auto Diagnostic Tool

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 04:17:11 +0800

CareCar C68 is a hand-held auto scanner that can help you trouble-shoots for ALL the electronic systems of your vehicle efficiently, it’s much more than an OBDII scanner with multifunction, it approaches and competes with professional auto diagnostic tools. It integrates the needs of DIY users and professionals with selectable vehicle software and high frequency of update.

Original CareCar C68 Retail DIY Professional Auto Diagnostic Tool

Note:
1. Supported Language: Multilingual (Remark: English is default)
2. Warranty For Multiplexer: 2 years
3. CareCar C68 is without Software in the package. But you can choose one freely. If you want more , you need to provide the serial number and pay for it. Each car model software cost is 54.99USD.

Description:

This device we only provide hardware, you need to purchase software sepreately from us. Each car software cost 54.99USD. If you need any car software, please leave a message under your order list, we will send you invoice for software you want to purchase. Once we get payment, we will open the software authorization for you, and you only need to update your machine, then it will have the software that you purchased.

Features:

1. Read and clear codes on ALL electronic systems.

2. User can choose DESIRED vehicles

3. Multifunctional capability includes reading DataStream (Data waviness), Adaptation, Key Programming, Actuation, ECU programming, Injector programming, Turns off MILs of engine, airbag, ABS, A/T and most other systems, Resets Oil Service Light, Service mileage and service intervals, Replaces and recalibrates brake pads safely etc.

4. Supports all OBD II protocols, Can (Controller Area Network) and all test modes including Read Codes, Erase Codes, Freeze Frame, I/M Readiness, O2 Mon.Test, On-Board Mon.Test, Component Test and Vehicle Information.

5. Vehicles before 1996 can be diagnosed.

6. Faster and stable diagnostic speed with unique new platform.

7. High frequency of update up to professional auto diagnostic tools

8. High definition touch display provides high sensitivity with screen locking/unlocking function.

9. Capture, save and print screenshots for convenient troubleshooting.

10. Support mass storage SD card.

11. Compact and attractive housing with protective rubber case makes it more durable and impact-free.

C68 Coverage:

Area or Country Vehicle Manufacturers Universal OBDII/EOBD/JOBD

USA:

GM Chrysler US Ford Chevrolet

Europe:

Fiat Lancia Alfa Romeo Benz Audi BMW

VW Skoda Volvo Opel Renault Citroen

Peugeot Land Rover Smart Seat Saab Vauxhall

Sprinter Jaquar Rover Porsche Euro Ford MG

Roewe

Asia:

Honda Suzuki Subaru Toyota Daihatsu Mitsubishi

Mazda Nissan Kia Hyundai Daewoo Isuzu

Maruti Mahindra Tata Golden Dragon Lifan Ssangyong

Brilliance Chery GreatWall Perodua Proton HaFei

Geely Chang an Changhe BYD SH GM Wuling Tailand Isuzu

Indonesia Suzuki Indonesia Daihatsu

Australia:

Holden Australian Ford

Middle East Iran:

Kia Iran Citroen Iran Peugeot

Package List:

1pc x C68 Main Cable

1pc x C68 Connector

1pc x SD Card

1pc x USB Cable

1pc x Stylus

1pc x Screen Protector

Multi-Cardiag M8 CDP 2013.02V for Cars/Trucks and OBD2 With 4G TF Card

samsondai168@gmail.com (Shen Zhen ZvgeInfo Technology Co., Ltd) — Sat, 28 Dec 2013 04:20:03 +0800

Multi-Cardiag M8 CDP+ is a diagnostic tool used with a PC or Pocket PC and powerful CARS Diagnostic software, making it a powerful and flexible tool for all vehicle shops, fleet owners, vehicle testing, road service, police and armed forces.

New Design Multi-Cardiag M8 2013.02V for Cars/Trucks and OBD2 With 4G TF Card

Software Version: 2013.02
Supported Languages:
English, Spanish, French, Italian, Portuguese, Czech, Dansk, German,Turkish, Greek, Dutch, Hungarian, Norwegian, Polish, Romanian, Russian, Serbian, Swedish, Finnish, Suomi

Specifications:.

Multi-cardiag M8 CDP+ is a quick and reliable diagnostic tool serving as a link between vehicle and computer. It works on both old and new vehicles.Simply connect Multi-cardiag M8 CDP+ to the diagnostic socket in the vehicle and it will communicate with the diagnostic software installed on your PC.With CARS, you are able to perform brand specific diagnostics for cars and light vans from 1988 onwards. A total of 47 different brands. With TRUCKS software package, you are able to perform brand specific diagnostics for light and heavy commercial vehicles, buses and trailers from 1995 onwards.

A total of 37 different brands. The diagnostic program GENERIC is designed for the legislation based diagnostics, specially targeted for emission related fault codes. GENERIC is included in CARS and TRUCKS packages.

Multiplexer function, 2xHS CAN (ISO 11898-2), SW CAN (SAE J2411), K/L (ISO 9141-2), RS485 (J1708), TTL and (SPI, analog in, 5volt out)

Features and Benefits

Flight Recorder With the flight recorder function, you can record parameters in real time while you are driving a vehicle. During recording, you can, with a press of a button, highlight the specific error so that you can investigate the detected error at a later time. Multi-cardiag M8 CDP+ is equipped with built-in memory thus removing the need to bring a computer. Memory card not include in package.

Multi Color Indicator With the multi colour indicator on Multi-cardiag M8 CDP+, you have full control of the diagnostic process. Different colors and sound communicates the status and the placement of the indicator allows you to see it from a far. For example, if the indicator alternates between blue and green the Multi-cardiag M8 CDP+ is in communication with the vehicle control unit.

Connector with LED To locate the diagnostic connector in the vehicle with ease, even if it’s located in a dark and inaccessible place, there is a LED on the 16-pin connector to help you along. The location and the design allows the light to function even when using the adaptor cable for vehicles without a 16-pin diagnostic socket.

Voltage Check When Multi-cardiag M8 CDP+ is connected to the vehicle, the unit will check the battery voltage of the vehicle and automatically adjusts itself to the vehicle’s voltage level of 12 or 24 volts. If the voltage gets too high or too low, CDP+ will warn you with both sound and light and you will also be alerted through the battery icon in our diagnostic software.

Chassis Number Vin In our CARS software, we have a smart function that allows you to read out the chassis number from the vehicle that you would like to diagnose. This ensures that the right model and year is selected automatically. In addition, engine code for vehicles, which are commonly available on the markets, is also selected automatically.

ISS. Intelligent System Scan (ISS) scans through all the systems in the vehicle and displays the fault codes that are stored in each system. This saves time and you get a quick overview of the actual status of the entire vehicle. When the ISS is complete, you can then select a specific control system to analyse the results further on.

ISI. Intelligent System Identification (ISI) identifies and selects automatically the type of controller that is mounted in the vehicle. This ensures that the diagnostic session is performed correctly with the correct parameters as required.

Report Function Under this function tab, you will be able to see the adaptations and adjustments that are possible for a specific vehicle without having the vehicle near you. Together with the help texts as a guide, you can plan and be effective in your work; even under complex situations.

OBD-Functions Multi-cardiag M8 CDP+ is equipped with an unique multiplexer technology, which allows it to be used on all types of vehicles, regardless of voltage levels and communication standards. For those vehicles that do not use the standard 16-pin connector, we offer a complete set of certified and customized adapter cables and kits.

Help Function For most OBD functions, such as adjustments and programmings, there are detailed instructions and help texts to assist you in your diagnosis work. You will find step by step information about prerequisites, preparation and implementation of various functions; making even the most complex function simple to perform.

Package List:

New design interface with led obd cable

USB cable (3 meter)

DVD 2013.02V

Special design original bag
4G TF Card

Line Length: about 168cm